• 제목/요약/키워드: doppler measurements

검색결과 238건 처리시간 0.044초

Analysis of success rate of GPS carrier phase ambiguity resolution in Korea peninsula

  • Soo, Son-Ji;In, Jee-Gyu
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.114.1-114
    • /
    • 2001
  • GPS Receiver gives pseudorange Doppler and integrated carrier phase for measurements to compute navigation information. Thought the integrated carrier phase can be transfer to the equal domain as pseudorange by multiplying the wave length of the received signal, in order to get position information from the carrier phase measurements the integer ambiguity should be resolved. And differencing technique is generally used to eliminate the common error terms of the integrated carrier phase measurements between robber and server. In short baseline double-differencing operation has effect on elimination the common biases for both stations and thus ambiguity resolution are to be reliable. But the baseline increases, the integer ambiguity resolution is hardly, due to the correlated common error is increase ...

  • PDF

레이저 회절법을 이용한 축대칭 분무 구조의 공간 분포 변환에 관한 실험적 연구 (An Experimental Study of Reconstruction from Laser Diffraction Measurement for Axisymmetric Sprays)

  • 양승연;이충훈;구자예;정석호
    • 한국자동차공학회논문집
    • /
    • 제8권1호
    • /
    • pp.10-16
    • /
    • 2000
  • Spatially resolved liquid volume fractions from a set of line-of-sight laser diffraction measurements for axisymmetric sprays generated from a pintle-type gasoline injector have been tomographically reconstructed by Abel transformation, Fourier transformation and onion peeling method. Spatially resolved liquid volume fractions classified into 32 size groups were translated characteristics of SI engine fuel sprays. These data were also obtained from the phase Doppler measurements for the same sprays. The comparison between laser deffraction measurements and transformation reconstructs more reasonable spatially resolved characteristics for axisymmetric sprays as well as for asymmetric sprays.

  • PDF

CFD simulations of the flow field of a laboratory-simulated tornado for parameter sensitivity studies and comparison with field measurements

  • Kuai, Le;Haan, Fred L. Jr.;Gallus, William A. Jr.;Sarkar, Partha P.
    • Wind and Structures
    • /
    • 제11권2호
    • /
    • pp.75-96
    • /
    • 2008
  • A better understanding of tornado-induced wind loads is needed to improve the design of typical structures to resist these winds. An accurate understanding of the loads requires knowledge of near-ground tornado winds, but observations in this region are lacking. The first goal of this study was to verify how well a CFD model, when driven by far field radar observations and laboratory measurements, could capture the flow characteristics of both full scale and laboratory-simulated tornadoes. A second goal was to use the model to examine the sensitivity of the simulations to various parameters that might affect the laboratory simulator tornado. An understanding of near-ground winds in tornadoes will require coordinated efforts in both computational and physical simulation. The sensitivity of computational simulations of a tornado to geometric parameters and surface roughness within a domain based on the Iowa State University laboratory tornado simulator was investigated. In this study, CFD simulations of the flow field in a model domain that represents a laboratory tornado simulator were conducted using Doppler radar and laboratory velocity measurements as boundary conditions. The tornado was found to be sensitive to a variety of geometric parameters used in the numerical model. Increased surface roughness was found to reduce the tangential speed in the vortex near the ground and enlarge the core radius of the vortex. The core radius was a function of the swirl ratio while the peak tangential flow was a function of the magnitude of the total inflow velocity. The CFD simulations showed that it is possible to numerically simulate the surface winds of a tornado and control certain parameters of the laboratory simulator to influence the tornado characteristics of interest to engineers and match those of the field.

비선형 특성을 시스템 입력으로 처리하는 추적 필터 (Tracking Filter Dealing with Nonlinear Inherence as a System Input)

  • 신상진
    • 한국전자파학회논문지
    • /
    • 제25권7호
    • /
    • pp.774-781
    • /
    • 2014
  • 레이더에서 측정값은 직교 좌표계가 아니라 극 좌표계에서 얻어진다. 표적 동력학을 직교 좌표계에서 모델링하면 극 좌표계에서 획득된 측정값을 직교 좌표계로 변환한 의사 측정치를 사용하거나 확장형 칼만 필터를 사용하여 표적 추적 필터를 구현한다. 만일 표적 동력학을 극 좌표계에서 모델링하면 측정 방정식은 선형이나 동력학 방정식이 비선형이 된다. 본 논문에서는 극 좌표계에서 동력학 방정식을 모델링하고, 시스템 행렬을 시불변 형태로 모델링하여 발생한 비선형 성분을 시스템 입력으로 처리한 추적 필터를 제안한다. 이러한 추적 필터는 거리 측정값과 동시에 도플러 측정값이 가용할 경우, 측정방정식의 선형성을 그대로 유지하게 되므로 추적 필터의 알고리듬에 변동이 없고 추가된 도플러 정보를 사용하여 추적 성능을 높일 수 있다. 또한, 기존에 일반적으로 사용되고 있는 추적 필터와 제안한 모델링을 사용한 추적 필터의 추적 성능을 시뮬레이션을 통하여 검증한다.

ADCP 다중빔 수심계측자료의 위상학적 보정 알고리즘 개발 (Development of Topological Correction Algorithms for ADCP Multibeam Bathymetry Measurements)

  • 김동수;양성기;김수정;정우열
    • 한국환경과학회지
    • /
    • 제22권5호
    • /
    • pp.543-554
    • /
    • 2013
  • Acoustic Doppler Current Profilers (ADCPs) are increasingly popular in the river research and management communities being primarily used for estimation of stream flows. ADCPs capabilities, however, entail additional features that are not fully explored, such as morphological representation of river or reservoir bed based upon multi-beam depth measurements. In addition to flow velocity, ADCP measurements include river bathymetry information through the depth measurements acquired in individual 4 or 5 beams with a given oblique angle. Such sounding capability indicates that multi-beam ADCPs can be utilized as an efficient depth-sounder to be more capable than the conventional single-beam eco-sounders. The paper introduces the post-processing algorithms required to deal with raw ADCP bathymetry measurements including the following aspects: a) correcting the individual beam depths for tilt (pitch and roll); b) filtering outliers using SMART filters; d) transforming the corrected depths into geographical coordinates by UTM conversion; and, e) tag the beam detecting locations with the concurrent GPS information; f) spatial representation in a GIS package. The developed algorithms are applied for the ADCP bathymetric dataset acquired from Han-Cheon in Jeju Island to validate themselves applicability.

난류 미분탄화염 내 입자거동에 관한 연구 (A Study on the Particle Behavior in Turbulent Pulverized Coal Flame)

  • 황승민
    • 대한환경공학회지
    • /
    • 제32권12호
    • /
    • pp.1111-1118
    • /
    • 2010
  • 비접촉법으로 유동장이나 온도, 화학종 농도의 계측이 가능한 레이저 응용 계측기술은 연소 메카니즘의 해명뿐만 아니라 수치해석 결과의 정당성을 입증하는 수단으로 최근 주목받고 있다. 본 연구에서는 레이저 도플러 유속계와 쉐도우 도플러 입자 분석계를 이용하여 난류 미분탄 화염 내 입자거동에 대하여 관찰하였다. 버너는 여러 광학계측을 용이하게 하기 위하여 대기개방형으로 하였으며, 실험실 규모의 안정된 난류 미분탄화염이 형성 가능한 소형 모델버너를 제작 하였다. 그 결과 미분탄 입자의 평균입경은 연소과정이 진행함에 따라 증가하는 경향을 나타내었다. 이러한 원인은 다수의 소입경의 미분탄 입자가 휘발분을 방출하여 연소반응에 의해 소실되기 때문이다. 또한 화염 중심부에서 미분탄 입자의 속도장은 입경의 크기에 크게 의존하지 않지만, 화염 외주부에서의 미분탄 입자의 속도장은 입경에 크게 의존하고 있음을 알 수 있다.

개의 안혈관에 대한 컬러도플러초음파를 사용한 저항지수의 평가 (Evaluation of Resistive Index Using Color Doppler Imaging in Canine Ophthalmic Vasculature)

  • Lee, Hee-Chun;Yoon, Jung-Hee
    • 한국임상수의학회지
    • /
    • 제20권2호
    • /
    • pp.145-149
    • /
    • 2003
  • 개의 정상안혈관저항지수와 그 재현성을 측정하고자 컬러도플러 초음파를 이용하여 본 실험을 수행하였다. 내측 긴 후모양체 동맥, 모양체 동맥, 안동맥의 혈관저항지수의 정상범주를 측정하기 위하여 58두의 개에서 컬러도플러 초음파를 실시하였다. 정상견에서 내측 긴 후모양체동맥, 모양체동맥, 안동맥의 저항지수(%)를 측정한 결과, 그 수치는 각각 0.67$\pm$0.07, 0.70$\pm$0.06, 그리고 0.08$\pm$0.04이었으며, 모든 혈관의 저항지수는 좌우안구간에 차이가 없었으며, 성별이나 두개골 형태가 미치는 영향도 없는 것으로 판명되었다. 안혈관 저항지수의 반복측정에 따른 오차를 평가하기 위해서 4회 반복 측정한 결과, 안동맥저항지수의 반복측정변이계수가 4.1%로 가장 낮았으며 긴 후모양체동맥과 모양체동맥의 저항지수의 반복측정변이계수는 각각 12.9%와 7.8%로 모든 동맥에서 높은 재현성을 보였다. 이상의 결과로 보아, 컬러도플러 초음파가 개의 안구 및 안와의 혈순환에 대한 객관적인 측정자료를 제시하는데 매우 유용한 지표인 것으로 판단된다.

정상 태아의 임신 분기별 좌심실 도플러 신호 자동 분석 (Automated Analysis of fetal Myocardial Performance Index of Doppler Waveform in Normal Pregnancy)

  • 김수민;예수영
    • 한국방사선학회논문지
    • /
    • 제14권6호
    • /
    • pp.791-800
    • /
    • 2020
  • 태아 심장의 기능을 평가하기 위해 초음파 검사가 널리 이용되고 있으나 주관적이라는 검사의 특성으로 인해 검사자마다 측정 방식에 차이가 있으며 특히 심근 성능 지수는 현재까지 기준치가 없는 실정이다. 이에 본 연구에서는 정상 태아의 펄스 도플러 파형을 분석하여 자동 측정 프로그램을 개발하여 객관적인 측정을 하고자 하였다. 2019년 4월부터 2020년 2월까지 부산에 위치한 W병원에 내원한 산모 133명을 대상으로 태아 심장 초음파검사를 시행하였으며 좌심실의 펄스 도플러 영상을 획득 후 각 심근 성능 지수를 측정하였다. 본 연구에서 구현한 자동 측정 프로그램을 이용한 임신 초기, 중기, 말기의 심장 성능 지수와 기존의 측정 방식을 이용한 심장 성능 지수를 비교한 결과, 두 수치에는 차이가 있었으나 같은 경향성을 보였다.

THE IRIS NETWORK fOR WHOLE DISC HELIOSEISMOLOGY: RECENT RESULTS

  • EHGAMBERDIEV SH. A.
    • 천문학회지
    • /
    • 제29권spc1호
    • /
    • pp.287-289
    • /
    • 1996
  • IRIS(International Research on the Interior of the sun) is the name of a worldwide network of 6 stations for whole disc Doppler shift measurements. The network has been operating since 1987 and by now a few series of a hundred days long unbroken (by day/night periodicity) data were received. Analysis of these data allowed to receivesome new results which are discussed in the paper.

  • PDF

Positron Annihilation Study of Vacancy Type Defects in Ti, Si, and BaSrFBr:Eu

  • Lee, Chong Yong
    • Applied Science and Convergence Technology
    • /
    • 제25권5호
    • /
    • pp.85-87
    • /
    • 2016
  • Coincidence Doppler broadening and positron lifetime methods in positron annihilation spectroscopy has been used to analyze defect structures in metal, semiconductor and polycrystal, respectively. The S parameter and the lifetime (${\tau}$) value show that the defects were strongly related with vacancies. A positive relationship existed between the scanning electron microscope (SEM) images and the positron annihilation spectroscopy (PAS). According to the SEM images and PAS results, measurements of the defects with PAS indicate that it was more affected by the defect than the purity.