• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.207-207
• /
• 2012

Si quantum dot (QD) imbedded in a $SiO_2$ matrix is a promising material for the next generation optoelectronic devices, such as solar cells and light emission diodes (LEDs). However, low conductivity of the Si quantum dot layer is a great hindrance for the performance of the Si QD-based optoelectronic devices. The effective doping of the Si QDs by semiconducting elements is one of the most important factors for the improvement of conductivity. High dielectric constant of the matrix material $SiO_2$ is an additional source of the low conductivity. Active doping of B was observed in nanometer silicon layers confined in $SiO_2$ layers by secondary ion mass spectrometry (SIMS) depth profiling analysis and confirmed by Hall effect measurements. The uniformly distributed boron atoms in the B-doped silicon layers of $[SiO_2(8nm)/B-doped\;Si(10nm)]_5$ films turned out to be segregated into the $Si/SiO_2$ interfaces and the Si bulk, forming a distinct bimodal distribution by annealing at high temperature. B atoms in the Si layers were found to preferentially substitute inactive three-fold Si atoms in the grain boundaries and then substitute the four-fold Si atoms to achieve electrically active doping. As a result, active doping of B is initiated at high doping concentrations above $1.1{\times}10^{20}atoms/cm^3$ and high active doping of $3{\times}10^{20}atoms/cm^3$ could be achieved. The active doping in ultra-thin Si layers were implemented to silicon quantum dots (QDs) to realize a Si QD solar cell. A high energy conversion efficiency of 13.4% was realized from a p-type Si QD solar cell with B concentration of $4{\times}1^{20}atoms/cm^3$. We will present the diffusion behaviors of the various dopants in silicon nanostructures and the performance of the Si quantum dot solar cell with the optimized structures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.447-447
• /
• 2009

In this study, transparent and conductive Al-doped zinc oxide (AZO) films were prepared on Corning glass and silicon wafer substrate by RF magnetron sputtering method using an Al-doped ZnO target (Al: 2 wt.%) at room temperature as the thickness of 150 nm. We investigated the effects of the RF power between 100 Wand 350 W in steps of 50 W on structural, electrical and optical properties of AZO films. Also, we studied the effects of the working pressure (3, 4 and 5 mtorr) on that condition. The thickness and cross-sectional images of films were observed by field emission scanning electron microscopy (FE-SEM) and all of the films were kept to be constant to $150\pm10$ nm on Coming glass and silicon wafer. A grain size was calculated from X-ray diffraction (XRD) on using the Scherrer' equation and their electrical properties investigated hall effect electronic transport measurement system. Moreover, we measured transmittance of AZO films by UV/VIS spectrometer.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.2
• /
• pp.97-105
• /
• 1985

Phosphorus and boron diffusion from doped PECVD oxide films into silicon have been studied. CVD PSG was also prepared to parallelly compare the diffusion characteristics of CVD PSG with that in PECVD PSG, The phosphorus diffusion experiments were performed in N2 and O2 ambient at the temperatures of 100$0^{\circ}C$, 105$0^{\circ}C$ and 110$0^{\circ}C$ The parameters of boron diffusion have been investigated from the doped film prepared by changing B2 H6 flow rate and deposition temperature. The diffusivities and diffusion profiles of the dopant into silicon were calculated by applying Barry's model using the measured parameters such as diffusion depth and surface concentration.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.38-45
• /
• 1989

We have studied the electrical characteristics of the hydrogenated amorphous silicon (a-Si:H) ambiploar thin film transistors (TET'S)using 100ppm boron-doped a-Si:H as an active layer. The enhancement of drain current due to the double injection behavior has been observed in the p-channel operation of the TFT. The drain current decreases with time in streched exponential form when the gate voltage is positive. The result indicates that the dangling bonds created by electron accumulation show identical time dependence as the diffusion of hydrogen in the film. We observed the experimental evidence that the doping efficiency changes either when the gate bias is applied or when the light is illuminated on boron-doped a-Si:H.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.5
• /
• pp.50-55
• /
• 1983

A comprehensive study of the electrical properties of low-dose Si implants in Cr-doped GaAs substrates has been made using the Hall-effect/sheet-resistivity measurement technique for various ion doses and annealing temperatures. The samples were implanted at room temperature and annealed with silicon nitride encapsulants in a hydrogen atmosphere for 15 minutes. H-type layers were produced at all dose levels investigated, and the optimum annealing temperature was 850$^{\circ}C$ for all doses. The highest electrical activation efficiency was 89% for Cr-doped GaAs substrates. Depth profiles of carrier concentrations and mo-bilities are highly dependent upon ion dose and annealing temperature. Significant im-plantation damage still remains after an 800$^{\circ}C$ anneal, and a 900$^{\circ}C$ anneal produces signi-ficant outdiffusion as well as indiffusion of the implanted Si ions.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.387-392
• /
• 2018

Static characteristics of SiC (silicon carbide) lateral p-i-n diodes implemented on semi-insulating substrate without an epitaxial layer are inVestigated. On-axis SiC HPSI (high purity semi-insulating) and VDSI (Vanadium doped semi-insulating) substrates are used to fabricate the lateral p-i-n diode. The space between anode and cathode ($L_{AC}$) is Varied from 5 to $20{\mu}m$ to inVestigate the effect of intrinsic-region length on static characteristics. Maximum breakdown Voltages of HPSI and VDSI are 1117 and 841 V at $L_{AC}=20{\mu}m$, respectiVely. Due to the doped Vanadium ions in VDSI substrate, diffusion length of carriers in the VDSI substrate is less than that of the HPSI substrate. A forward Voltage drop of the diode implemented on VDSI substrate is 12 V at the forward current of $1{\mu}A$, which is higher than 2.5 V of the diode implemented on HPSI substrate.

• Journal of the Korean Ceramic Society
• /
• v.49 no.4
• /
• pp.325-327
• /
• 2012

Europium-doped $LaSi_3N_5$ phosphor was synthesized from LaSi/Si/$Si_3N_4/Eu_2O_3$ mixture by nitridation at $1390^{\circ}C$ and additional annealing at $1650^{\circ}C$ for 4 h. The phosphor shows emissions in the green light region with a maximum at 560 nm. With increasing europium content in the general formula $La_{1-z}Eu_zSi_3N_{5-z}O_{1.5z}$ from z = 0.01 to 0.06 there was a maximum emission for z = 0.04 followed by concentration quenching for the highest europium content (z = 0.06).

• Journal of Korean Vacuum Science & Technology
• /
• v.2 no.1
• /
• pp.25-31
• /
• 1998

The reliability of fluorine doped silicon oxide (SiOF) films for intermetal dielectrics in multilevel interconnections of ultra-large scale integrated circuits (ULSIs) is investigated. SiOF films were deposited by electron cyclotron resonance plasma-enhanced chemical vapor deposition (ECRPECVD) using H-free source gases, i.e., SiF4 and O2. The effect of post plasma treatment on the moisture absorption and dielectric properties of SiOF films was carried out I terms of air exposure time, The reliability test of Cu/TiN/SiOF/Fi specimen was carried out in terms of temperature by rapid thermal annealing (RTA) in N2 ambient. After O2 plasma treatment,, no appreciable peak directly related to moisture absorption was detected. The capacitance-voltage (C-V) characteristics of the O2 plasma treated SiOF film showed that the film remained to hold the sound dielectric properties even after boiling treatment. The Cu/TiN/SiOF/Si system was found to be reliable up to $600^{\circ}C$.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.6
• /
• pp.1-4
• /
• 2003

Anti-reflection properties of post diffusion doped spin-on source (in-situ AR coating) have been investigated in some detail. A simple experiment for reflectivity study using oblique incidence of light and necessary modification of the theory of minimum reflectivity at oblique incidence has been established. The comparative study of the in-situ AR coating with available spin-on AR film on silicon Solar Cell Surface have been investigated.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.513-516
• /
• 1987

Hydrogenated amorphous silicon (a-Si:H) films have been deposited, for thye first time, by a remote plasma chemical vapor deposition. The hydrogen radical play a important role to control the deposition rate, The bonded hydrogen content to silicon is independent of hydrogen partial pressure in the plasma. Optical gap of deposited a-Si:H lies between 1.7eV and 1.8eV and all samples have sharp absorption edge. B-doped a-Si:H films by a RPECVD has a high doping efficiency compared with plasma CVD. The Fermi level of 100ppm B-doped film lies at 0.5eV above valence band edge.