• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.559-571
• /
• 2008

Platform Screen Door(PSD) has been installed and operated at seoul subway line $1\sim4$ in the manual train operation mode(ATS/ATC) by SeoulMetro since 2005. SeoulMetro uses the wireless (RF) communication system and the train door detection system for the link between the train and PSD doors opening/closing motion in the manual train operation mode. For the convenience and safety of passengers, the train doors and the PSD doors opening/closing shall be synchronized as much as possible. In ATO(Automatic Train Operation) mode which provides the interface between train control system and PSD system, ATO signaling system makes the train doors and PSD doors open/close command signals systematically, so PSD doors can be opened/closed almost simultaneously with the train doors. But, in the manual train control(ATS/ATC) mode, PSD system needs to detect the train doors open/close operation and make PSD open/close command signals to actuate PSD doors. These PSD open/close commanding process cause time delay of PSD doors opening/closing motion in response to the train doors opening/closing motion. Sometimes the response delay time can be over 1 second, which is not proper to operate PSD, and need to be reduced This paper presents the reduction method of the PSD response delay time to improve the convenience and safety of passengers.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.1
• /
• pp.25-30
• /
• 2024

Considering the difficulties of the manufacturing industry by improving production efficiency in the era of high wages and aging in domestic automation facilities, automation facilities are considered an irreversible trend, but many serious related disasters are occurring due to the problems of increasing automation facilities due to the enlargement of manufacturing processes, line-up, and automation. The purpose of this study is to review the usage conditions and safety measures for industrial robots that are experiencing serious industrial accidents and are expected to continue to increase in facilities among automation facilities at the automation industrial site and propose ways to ensure the fundamental safety of the facilities at all times The suggestions are as follows. The purpose is to prevent safety accidents in advance by applying safety door aids to industrial sites and installing additional safety devices in safety slide door lock systems applied to safety fence doors of new and already installed facilities to detach safety keys and ensure that workers carry them at all times.

• The Korean Journal of Financial Management
• /
• v.27 no.1
• /
• pp.121-156
• /
• 2010

Back-door-listing can be viewed both as M&A and an alternative to IPO. If IPO is an access to the capital market through regulations, back-door-listing would be the way of entering the market through trading. Back-door-listing can be a better choice considering the common wisdom that regulations hinder the functioning of free market system. One would, however, prefer IPO, for the informational asymmetry isless severe in case of IPO. This paper examines if IPO is superior to back-door-listing as to the informational efficiency. The excess buy-and-hold returns of the Kosdaq back-door-listing firms are estimated over the three-year-period since the event. They are compared against the excess buy-and-hold returns of the Kosdaq IPO firms over the same period of time. The results confirm this paper's prediction that IPO should be more information-efficient. Both IPO and back-door-listing firms start with high short-term excess returns and end up with long-term under-performance. However, back-door-listing firms show more significantly damaging long-term results. Furthermore, back-door-listing firms record poorer accounting results over the research period. These results imply that there exists fad at the time of both events and, in case of back-door-listing, this fad is reinforced by the possibility of window dressing.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1593-1597
• /
• 2003

The home service robot supports human beings by performing various kinds of works at home. This paper presents a simple control method for opening a door from the viewpoint of the mobile manipulation. The simulation shows various results of path planning and motion planning for opening a door. The joint trajectories were generated by the simulation system. In general, a six-axis force/torque sensor at an end-effector is needed in order to maintain the static equilibrium of the manipulator. But we show another method. From three components of applied forces which was directly obtained by the three-axis force sensor and three components of applied forces which was indirectly estimated by the joint-torque sensors, all of joint torques that will exactly balance forces at the end-effector in the static situation can be found. It is more practical method than using a six-axis force sensor in a wrist. Experimental results have shown that the opening a door can be realized more effectively from the suggested control method of mobile manipulation.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.3
• /
• pp.110-113
• /
• 2011

Platform Screen Door, PSD, is a device that seeks to prevent accidents with regards to falling off the platform and getting trapped between the trains, achieve improvements on the cleanliness of the air, address the accessibility issue of the disabled and the elderly and provide fresher environment on the platform in general. This is achieved by preventing health hazards and accidents from occurring through installation of fixed and moving doors between rail, tram and subway platforms and the railway. Domestic firms have achieved domestic production to a large degree in various Control Units including the Overall Control Unit and RF devices through investments in technology. Despite this, full domestic production of the core of the PSD system, Door Control Unit, DCU, is not yet achieved, having to install PSDs in a relatively short period of time. Currently, controllers with DC motors are developed for installation or one is faced with having to import foreign produced controllers. In this research, the control unit prototype using the BLDC motor was domestically produced. The performance of the control unit was rigorously tested through installation on Eun-Ha Rail on Wol-Mi Island.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.2
• /
• pp.68-71
• /
• 2011

In the case of Seoul Metro, prior to installation of platform screen doors, had seen 4~6 cases a month of mortal injuries from accidents on the platforms, including suicide attempts towards the oncoming train. However, since the installation of platform screen doors, Seoul Metro has achieved a feat of '0 mortal injuries'. In the initial stages of introducing platform screen doors domestically, due to a lack of experience in controlling platform screen doors, the products were imported and installed through technical cooperations from Japan, France and the United States. Thereafter, following investments in technologies by domestic firms, domestic production of parts such as overall control mechanism, specific control mechanism, RF devices and others were achieved. However, having installed platform screen doors in a relatively short period of time, DCU(Door Control Unit), an integral part of the whole platform screen door system, is yet to be fully domestically produced. At this moment in time, installation is being done with imported products or DCUs developed with DC motors. In this research, advantages and disadvantages of DC and BLDC motors for use in DCU will be analyzed and will produce an own BLDC controlling unit in order to solve any problems arised. Furthermore, the BLDC controlling unit produced will be integrated with DCU to improve the performance of the product and its price competitiveness.

• Fire Science and Engineering
• /
• v.25 no.2
• /
• pp.132-137
• /
• 2011

A relationship between resisting moment and the structure of an automatic closure device is introduced for analyzing the effect of opening and closing condition on various fire door sizes in the pressurized room for smoke control system. The larger the size of fire door is, the more force is required for reaching to opening and closing conditions and there exists the design range of fire door in the pressurized room reflecting the closing time of fire door, rotative velocity, a relation between rotative angle and force and the efficiency of the automatic closure device.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.49-50
• /
• 2022

There are continuous cases of fire expansion due to fire door problems around the world, including the 2010 Shanghai Apartment Fire, the 2017 Grenfell Tower Fire in England, and the 2020 Ul-san Residential and Commercial Complex Fire. In order to prevent such fire damage, the country has strengthened the performance standards of fire doors, and recently, efforts have been made to ensure the best performance of fire doors by introducing a quality recognition system. Securing the performance of fire doors is a very important aspect. However, there is a concern that old fire doors may not function normally in the event of fire due to natural deterioration, corrosion, and damage during the use process, but countermeasures are insufficient. Therefore, from a management perspective, it is very important to maintain fire doors and secure an appropriate replacement time. Therefore, the purpose of this study is to determine whether the fire door has durability to prevent fire spread in the process of use through operation probability analysis and expert surveys, and to propose an appropriate useful life of the fire door.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.115-115
• /
• 2004

최근에는 자동차용 범퍼(Bumper), 인판넬(In-panel), 도어판넬(Door panel), 도어가니쉬(Door Garnish) 등과 같은 대형 사출성형품을 성형하기 위한 금형설계에 핫 러너 시스템(Hot Runner System)에 밸브 게이트(Valve Gate)를 채용한 밸브 게이트 시스템을 많이 사용하고 있다 이 시스템을 사용함으로서 성형 싸이클타임의 단축, 수지 스크랩의 감소 등의 말은 장점이 있으나, 실제 성형작업 적용 시 밸브 게이트의 작동순서 및 개폐시간의 제어 등에 정확한 표준이 없어 시험 사출시 최적 성형조건의 셋팅이 많은 시간을 소모하고 있는 문제점이 있다.(중략)

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.151-154
• /
• 2001

우리 주변에서 쉽게 접할 수 있는 도어락 시스템(Door Lock System)을 기존의 열쇠방식이 아닌 자기카드(magnetic card)를 이용하여 이를 열쇠로 사용하는 것으로 누구든지 소지하고 있는 은행용 현금카드의 데이터를 비밀번호로 사용하는 방식의 도어락 시스템에 대해서 구현하였다. 또한 카드의 사용이 불가능할 때를 대비하여 4×4의 키패드를 이용하여 정해진 비밀번호를 입력하여 문을 열 수 있도록 제작하였다. 부가적인 주변장치로 도어락 시스템은 항상 동작하여야 하므로 오동작으로 인해 도어락 시스템이 작동하지 않을 경우를 대비하여 자동적으로 시스템을 초기화하도록 해서 정상적인 회로동작이 가능하게 하는 기능을 추가하였다.