Purpose: The aim of this study was to evaluate the influence of the crown-to-implant (C/I) ratio on the change in marginal bone level around the implant and to determine the site-related factors influencing the relationship between the C/I ratio and periimplant marginal bone loss. Methods: A total of 259 implants from 175 patients were evaluated at a mean follow-up of five years. Implants were divided into two groups according to their C/I ratios: ${\leq}$ 1, and >1. Site-related factors having an influence on the relationship between C/I ratio and periimplant marginal bone loss were analyzed according to the implant location, implant diameter, implant manufacturer, prosthesis type, and guided bone regeneration (GBR) procedure. Results: It was found that 1) implants with a C/I ratio below 1 exhibited greater periimplant marginal bone loss than implants with a C/I ratio more than 1, 2) site-related factors had an effect on periimplant marginal bone loss, except for the implant system used, 3) the C/I ratio was the factor having more dominant influence on periimplant marginal bone loss, compared with implant diameter, prosthesis type, implant location, and GBR procedure, 4) implants with a C/I ratio below 1 showed greater periimplant marginal bone loss than implants with a C/I ratio greater than 1 in the maxilla, but not in the mandible, 5) and periimplant marginal bone loss was more affected by the implant system than the C/I ratio. Conclusions: Within the limitations of this study, implants with a higher C/I ratio exhibited less marginal bone loss than implants with a lower C/I ratio in the posterior regions. The C/I ratio was a more dominant factor affecting periimplant marginal bone loss in the maxilla than the mandible. Meanwhile, the implant system was a more dominant factor influencing periimplant marginal bone loss than the C/I ratio.
Daily samples were collected during summer in order to analyse changes in the mesozooplankton community and to identify the major environmental factors that may influence mesozooplankton abundance in Jangmok Bay. A single site in the bay was sampled 47 times from July to September 2003. Mesozooplankton community, hydrographic (watertemperature, salinity, dissolvedoxygen) and biological (chlorophyll-a, ciliates densities, Noctiluca scintillans densities) factors were determined. The mesozooplankton abundance varied remarkably from 954 to $14,816\;inds.\;m^{-3}$. The six taxa of Evadne tergestina, barnacle nauplii and cypris, Paracalanus parvus s.1., Acartia omorii, Penilia avirostris and Sagitta crassa dominated numerically, contributing 86% of total mesozooplankton abundance. Stepwise multiple linear regression analysis was applied to find correlation between environmental factors and fluctuation in the abundance of dominant species and mesozooplankton. A. omorii was significantly correlated with temperature and N. scintillans densities. E. tergestina was correlated with temperature, salinity, and ciliate densities, whereas P. avirostris was correlated with temperature and dissolved oxygen. Among the environmental factors, mesozooplankton abundance correlated most strongly with N. scintillans densities. Accordingly, N. scintillans may be a key player in controlling the fluctuation of mesozooplankton abundance as a strong competitor for same food resources.
In order to determine the distributional ecology, and to investigate factors influencing these features, the diatom communities in plankton at depths of one, twenty-five, fifty, and seventy five meters in the area were studied and measured over a fifteen month of period. Measurements of environmental factors including temperature and salinity and algal nutrients such as phosphate, silicate, nitrate, and ammonia were also made at the same depths and locations. The results indicate that the size of diatom communities and the species population changes were heavily dependent upon to season and location parameters as well as nutrient concentrations and hydrographic factors. Major factors influencing population distributions varied with principal species responsible for dominant species and species sucession. Two distinct distributional patterns in total diatom crop were observed in the study area. Maximum standing crop observed during spring and/or summer were related to the concentration of nutrients available at the onset of the spring bloom on a large scale. On a small scale, however, the distributions of total diatom standing crops were significantly correlated with both season/location factors and with hydrographic parameters as well. Vertical stratification of diatoms was observed only in the presence of the thermocline in the water column. Within the study area there was some seasonal consistancy in the composition of the species groups. However, some species association in these environments may vary with the change of season.
ANGGADINI, Sri Dewi;SURTIKANTI, Surtikanti;SAEPUDIN, Asep;SALEH, Dean Subhan
The Journal of Asian Finance, Economics and Business
/
v.8
no.5
/
pp.1039-1046
/
2021
This study aims to determine the influence of the application of Total Quality Management (TQM) in coffee exporting companies in Bali. The research was conducted as there was not much research done to explore the application of TQM in coffee exporting companies in the city of Kintamani, Bali. Thus, this research plays an important role in examining the effect of the application of total quality management factors on company performance. In this research, the effect of TQM variables which are: customer focus factors, continuous improvement factors and employee empowerment factors on the company's performance was measured by using a balanced scorecard approach. The research result showed that the customer focus, the continuous improvement, and the employee empowerment factor has a positive impact on the performance of coffee exporting companies in the City of Kintamani. The result showed that continuous improvement factor has a more dominant influence compared to the customer focus factors and the employee empowerment factor. Thus, it is very important to consider the consistency when the companies implement TQM. In conclusion, TQM is important for coffee exporting companies in Indonesia to enter global competition, especially for world market-oriented companies and should be supported by the government and stakeholders.
Journal of the Korean Society of Manufacturing Process Engineers
/
v.19
no.11
/
pp.64-69
/
2020
To determine the effective factors for microparticle blasting with precise sequence position control in the x-axis and y-axis directions, we conducted a statistical experimental analysis of blasted square shapes by considering five condition factors. The control input and output were operated simultaneously by rotation-linear motion conversion and fine particles were blasted onto the aluminum specimen by precise position control driving using multiple execution codes. The micro-driving device used for processing was capable of microparticle blasting and of controlling the system through contact with a limit sensor at high speed and a two-degree-of-freedom driving mechanism. Our experiments were conducted on 1,050 specimens of pure aluminum (containing <1% of other elements). The effects of several factors (e.g., particle and nozzle diameters, blasting pressure, and federate and blasting cycle numbers) on the surface roughness and blasted surface's depth were verified through a statistical experimental analysis by applying the dispersion analysis method. This statistical analysis revealed that the nozzle diameter, the blasting pressure, and the blasting cycle number were the dominant factors.
International conference on construction engineering and project management
/
2015.10a
/
pp.142-146
/
2015
Human resources development is considered a critical issue for improving productivity of workers in construction industry. The aim of this study is to identify and rank the key motivating factors that impact skilled workers productivity according to their relative importance. A total of 27 factors were identified through a literature review, which were categorized into 2 group financial and un-financial motivators. A questionnaire instrument was adopted in this study. The study revealed that the most significant group which affected skilled workers' productivity in construction projects was financial group with the recognition of the un-financial group importance. The results emphasized that the financial group has an edge over the un-financial group which reflect the priority of need for the respondents. The results indicated that the un-financial group represents a backbone in its importance after the financial group which reflects that un-financial factors can improve productivity. The findings showed that the provision of companies to safety conditions factor such as protective safety clothing and protective equipment was ranked very low by the respondents. This is due to the dominant culture of the workers as well as the lack of their awareness regarding their own safety and lack of companies' interest in safety and health for workers. Construction companies are advised to take the key motivating factors obtained from the results of this study into serious consideration in order to improve the satisfaction of their workers and improve their productivity.
This study described the spatial distributions of marine environmental factors such as water temperature, salinity, chlorophyll a concentration and turbidity, and characteristics of phytoplankton community such as species composition, standing crops and dominant species at 19 fishing ports around Jeju Island during the early summer of 2016. I analyzed bio-oceanographical characteristics using principal component analysis (PCA) of the environmental factors and biological parameters. Water temperature, salinity, chlorophyll a and turbidity ranged from 17.6 to $20.7^{\circ}C$, from 26.19 to 32.33 psu, from 0.76 to $7.13{\mu}g\;L^{-1}$, and from 0.51 to 14.49 FTU, respectively. A total of 51 species of phytoplankton belonging to 35 genera were identified. In particular, diatoms and dinoflagellates accounted for more than 56.8% and 27.4% of all the species, respectively. Moreover, the number of phytoplankton species was controlled by salinity. Phytoplankton cell density ranged from $2.9cells\;mL^{-1}$ to $185.9cells\;mL^{-1}$. The dominant species were Navicula spp. Stephanopyxis turris, Eutreptiella gymnastica and Mesodinium rubrum. Environmental factors and the phytoplankton community varied greatly between sampling sites. According to PCA, the biological oceanographic characteristics of the around Jeju Island were characterized by meteorological factors such as air temperature, precipitation and discharge of ground water during early summer.
To predict combustion instability in actual full-scale combustion chamber of rocket engines, air-injection test is proposed with scaling techniques. From the data, damping factors have been obtained as a function of hydraulic parameter and the data give us instability map. Two instability regions are presented and it is found that they coincide reasonably with them from hot-fire test with full-scale flow rates. Accordingly, the proposed approach can be applied cost-effectively to stability rating of jet injectors when mixing of fuel and oxidizer jets is the dominant process in instability triggering.
Ginseng, one of the important economic crops, is processed into medicine, teas, beverages and even foods. Drying is the most important and burdensome work in the processing of ginseng, so development of ginseng dryer is needed for efficient drying and good quality of ginseng. Investigation of drying model is essential for development of ginseng dryer. Drying models for peeled ginseng were investigated to determine dominant drying factors and fitted with five selected drying models and an empirical model. Thompson and the empirical model showed best fit with the experimental data. Pother experiment is necessary to prove the superiority of the empirical models.
When grasping a movable object or making an object move, humans feel kinesthetic sense. Kinesthetic sense is the human sense that the human feels in response to the motion acted on the human. The objecive of the paper is tranforming the kinesthetic sense to quantitized data that is useful from the viewpoint of engineering. To provide various motion patterns, 2-dimensional motion generator was built using 2-axis linear motors. Active stiffness and active damping were implemented by means of current control and force feedback techniques. Based on Taguchi method, the most dominant factors to affect kinesthetic sense were investigated. Also, some functions adequate to quantize the kinesthetic sense were found.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.