• Solar Energy
• /
• v.6 no.1
• /
• pp.47-59
• /
• 1986

This paper presents the establishment of optimum design conditions and economic evaluation for solar hot water system. The aim of this study is to present thermal performance of solar heating systems and to determine their performance as a function of collector size, storage capacity, tilting of collector and other factors. By analyzing its performance under the various conditions, optimum design of solar heating system can be obtained. System performance are obtained monthly and yearly basis respectively. At the same time the economics of various systems are evaluated. For the computer simulation Mokpo, Kangnung, Chupungnyong and Seoul are selected for particular installation places. As a result, the optimal design condition of solar heating system considering the following factors such as installation angle of collector, capacity of storage tank, collector size in each place can be obtained as follows; (1) Installation angle of collector Tilt = lattitude (2) Capacity of storage tank Solar domestic hot water system : $45\;1/m^2$ Multifamily solar domestic hot water system : $35\;1/m^2$ (3) Collector size i) Solar domestic hot water system Seoul & Chupyungyong area : $11.52\;m^2$ Mokpo area : $8.64\;m^2$ ii) Multifamily solar domestic hot water system Seoul, Chupyungyong & Mokpo area : $345.6\;m^2$ Kangnung area : $259.2\;m^2$

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.5
• /
• pp.432-439
• /
• 2013

The aim of this study was to investigate the processes for evaluating the allowable bending stress. The confidence levels and the size-adjustment in standards were reviewed with experimental data. The results show that, (1) KS F 2152 was more strict than others overseas standards due to the higher confidence level. The 5% NTL of bending strengths by a method in KS F 2152 were lower than the overseas standards and more specimens were required for evaluating the structural properties according to KS F 2152. (2) Due to the absence of size-adjustment method in domestic standards, the specified size and the exponential parameters on the size-adjustment equation were reviewed by size factors. The specified size (width: 286 mm, length: 6096 mm), and the exponential parameters (w: 0.29, l: 0.14) will be suitable for developing the allowable bending stress in domestic standard. (3) The size adjusted allowable bending stresses of No. 2 grade Korean pine were lower than the allowable stresses tabulated in KBC even though less strict method (75% confidence level) to calculate 5% value was used. The allowable stresses tabulated in KBC are needed to be reviewed by continuous experimental data.

• Journal of the Korean Society of Costume
• /
• v.55 no.2 s.92
• /
• pp.116-128
• /
• 2005

The aim of this study is to understand problems with both fit and sizing system of gloves by analyzing the glove production industries with an emphasis on the sizing system, production measurement system, and general marking situation. Also, to suggest the basic raw materials for improving sizing system for gloves, actual glove control sizes were compared to the anthropometric data of the previous study Fifteen domestic production companies were participated in this study-Domestic glove production companies established their own sizing system by copying inter-national brand's glove sizing system or by their experience. The Korean Standard of gloves and the 1997 Korean Standard Anthropometrics Measurement for producing glove patterns are not considered because of its discordance with the reality of the required measurements. Domestic glove production companies used different size designation and labeling system. Size measurement unit also showed difference among the glove production companies. Some companies used 'cm', some used 'mm', some used 'inch' for the measurement unit. In general, companies produced 5 to 4 sizes in one design of glove and the production was the highest in M and L size. In 9 out of 15 companies preferred control size as hand length and hand circumference. For reference size, most of the companies preferred finger circumference, finger length, palm length, hand breadth, crotch height, and hand thickness. Actual glove sizes were compared to the anthropometric data of the previous study. The results indicated that most of the measurements of actual glove sizes were significantly larger than the anthropometric data.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.3
• /
• pp.391-401
• /
• 1999

For proper communication among manufactures in various countries and for consumers' convenience in purchasing garments imported from foreign countries the ISO revised the size designation system in 1969. Since 1970's various countries have revised their standard sizing system by adapting the ISO system . The purpose of this study is (1) to satisfy domestic consumer's needs by developing a sizing system based on that of ISO for Korean women in their early twenties and (2) to contribute to entering the international fashion market by manufacturing high quality apparel products The results were as follows: (1) By measuring and analyzing of 464 female between the ages for 18 and 24 the data indicated that body height could be divided into following three groups. S(Short) : 152cm (19.2%) R(Regular) : 160cm (57.8%) L(Long) : 165cm(22.6%) (2) According to the results to analyzing body type of this study the medium hip(drop 6) is 47.4% the large hip(over drop 12) is 42.7% the 2 types covers 90.3% (3) Comparing Korean women's size with foreign women's size DOB size code is 17 JIS size code is 9AR, FNOR size codes are 36n. 38n. and Italian size cods are 40, 42

• Fashion & Textile Research Journal
• /
• v.22 no.6
• /
• pp.834-843
• /
• 2020

This study develops 1/2 dress forms for draping. This study investigated the production status of domestic and foreign products in order to model their shape using CLO 3D. In addition, it developed torso-type and torso-crotch-type products that allowed for draping using a 3D printer. This study analyzed shape and size compared to developed ones after referring to the Size Korea 7th Survey data as well as seven domestic and foreign company websites. The results are follows. First, an investigation of the production status of the products for the size of most of the domestic ones (except K-4) indicated that the waist circumference was slimmer than Size Korea. Bust, waist, and hip circumferences ranged from 42.0 cm, 32.0 cm, and 45.0 cm - 49.0 cm, respectively, in Chinese products; 42.0 cm - 43.0 cm, 30.5 cm - 31.5 cm, and 46.0 cm - 46.5 cm in Japanese products; 43.0 cm, 35.0cm, and 46.5 cm in American products (Japanese body shape applied). Second, an avatar was produced on a 3D software with the average size of 20-24year-old women, and its file modified as a dress form for 3D printing with PLA filament to produce dress forms for draping, workable with pins, using quilting cotton and cotton cloth. Third, the comparisons of the form and flattening between the developed dress forms and the selling ones indicated that flattening was bigger in the waist part of the former than the latter. The waist is produced too slim in the existing dress forms; therefore, it is necessary to correct the waist circumference. Unlike existing dress forms, the developed ones were produced in proximity to the average size of 20-24 year-old women in the Size Korea 7th Survey.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.4
• /
• pp.614-623
• /
• 2015

This study aims to estimate the Green-House-Gas emissions from domestic farmed flounder in the southern sea and Jeju-Do, where is mainly produced, by the assessment of energy consumptions and GHG emissions from domestic fish farms for establishing reduce standards of greenhouse gas from a sustainable perspective. It needs to analyze such GHG emission components as feed, electricity, fuel, fixed capital, fish respiration, and liquid oxygen in two locations by 4 stage running water type farm size of small, small and medium, large and medium, large scale. The result showed that the mean GHG emissions were $36.83kg{\cdot}CO_2/year$ in the southern sea and $24.33kg{\cdot}CO_2/year$ in Jeju-Do, respectively, in the stage of production per fish 1kg at 2 locations and farm size from domestic farmed flounders, and it will give to be useful for policy, planning, and regulation of aquaculture development with establishing GHG reduction standards.

• Safety and Health at Work
• /
• v.1 no.2
• /
• pp.167-174
• /
• 2010

Objectives: Intimate partner violence (IPV), commonly known as domestic violence is a problem throughout the world. An estimated 36% to 75% of employed abused woman are monitored, harassed and physically assaulted by their partners or ex-partners while trying to get to work and while at work. The objective of this research is to evaluate the effectiveness of interactive training to increase knowledge, change perceptions and develop an intention to address domestic violence that spills over into the workplace. Methods: Community-based participatory research approaches were employed to develop and evaluate an interactive computer-based training (CBT) intervention, aimed to teach supervisors how to create supportive and safe workplaces for victims of IPV. Results: The CBT intervention was administered to 53 supervisors. All participants reacted positively to the training, and there was a significant improvement in knowledge between pre- and post-training test performance (72% versus 96% correct), effect size (d) = 3.56. Feedback from focus groups was more productive than written feedback solicited from the same participants at the end of the training. Conclusion: Effective training on the impacts of IPV can improve knowledge, achieving a large effect size, and produce changes in perspective about domestic violence and motivation to address domestic violence in the workplace, based on questionnaire responses.

• Korean Journal of Agricultural Science
• /
• v.29 no.2
• /
• pp.135-148
• /
• 2002

In recent years, domestic market environment of rice production is confronted with the problems of excessive production and decrease in per capita consumption, resulting in steady decline of domestic rice price. Moreover, as new trade negotiations of WTO or FTA are being forwarded, cheap price of imported rice will also make the rice production environment being worse off. One of the possible production strategies to relieve this situation could be expanding farm size, which increases market competitiveness in terms of cost-saving. Since 1990's, one of the main agricultural policies for rice production in Korea has been expanding farm size. This study aims at 1)exploring brief history of Korean government's agricultural policy for expanding farm size, 2)examining economic effect of farming size expansion, and 3)discussing major role of government to promote appropriate programs for rice-farming and producers. Main conclusion suggests that appropriate farming size should be expanded upto at least five hectares per farm, with producers' effort to reduce farming costs and continuous investments on agricultural infrastructures including irrigation systems, etc. Continuous government's investment on operation and maintenance on water facility is also one of the important factors in expanding farm size.

• Fashion & Textile Research Journal
• /
• v.18 no.5
• /
• pp.708-715
• /
• 2016

This study researched the sizing system of dress form for apparel manufacturing in the domestic market. It aims to be used as basic data for the development of a dress form that could be used by manufacturers of senior men's clothing. Research focused on the sizes presented on the homepages of 17 dress form manufacturers in the USA, France, Japan, and Korea. Body measurement was made for senior men in their 50's over men (n=134). Six items were measured by the 'Standard body measurement of Size Korea'. The type of dress form in the domestic market can be classified into half-body type (upper body type and lower body type), torso, and whole-body type; in addition, each type is divided into upper arm, arm, crotch, and thigh. Korean dress form manufacturers produced/sold diverse kinds (size 7-9) for women; however, they used large/small sizes or product sizes for men without defining sizes. The chest size (93-105cm) has not been standardized while the rates of waist circumference, hip circumference and shoulder length (in accordance with the chest size) were all different. Global dress form brands manufactured reflecting body dimensions by the state organization USA ASTM. Japan JIS. For this reason, most domestic clothing businesses depend on imported dress forms. Especially, there were no dress forms for senior men. With the growing market for seniors, it would be necessary to produce senior dress forms for clothing production that reflect the body shapes and sizes of seniors.

• The Research Journal of the Costume Culture
• /
• v.31 no.3
• /
• pp.296-309
• /
• 2023

This study gathered basic information on the development of Jiu-Jitsu uniforms suitable for players in Korea. Detailed data were collected between December 20^th and December 30^th, 2022 on 21 selected brands sold in online shopping malls. For each, information was recorded on the production country, product type, price, colors, material, and sizing system. A total of 612 datasets were analyzed using frequency analysis, cross-tabulation, and Chi-square tests. Jiu-Jitsu uniforms were classified as either standard or limited edition. Limited edition uniforms were more expensive than regular uniforms. International brands had a higher price range than domestic brands. The most commonly used colors for Jiu-Jitsu uniforms were the regulation colors associated with the sport: white, black, and blue. Domestic brands were more likely to use non-regulation colors than international brands. The material used for the top half of the uniform was predominantly pearl weave, while the bottom half was usually ripstop. International brands used a more diverse range of materials than domestic brands. The Jiu-Jitsu uniform sizing system incorporated a range of sizes between A00 and A6. While sizing designations differed according to the established sizing systems of different countries, the sizes remained the same, as did the range of sizes available. Where size guides were provided, height and weight were used to help the customer determine the appropriate size. The dimensions of each size varied between brands. Overall, we found that international brands offer a more diverse range of Jiu-Jitsu uniform designs than domestic brands.