• 제목/요약/키워드: domestic rice

검색결과 264건 처리시간 0.025초

한국인 대표 식단 및 당뇨 식단의 정상인에 대한 혈당반응 (Glycemic Responses of Korean Domestic Measl and Diabetic Meals in Normal Subjects)

  • 윤석권;김명애
    • 한국식품영양학회지
    • /
    • 제11권3호
    • /
    • pp.303-311
    • /
    • 1998
  • 당뇨식이로 추천된 5가지의 식단과 설문조사에서 가장 많이 이용하는 한국식단 설문조사 결과에서 가정식 10가지와 외식 9가지 식단을 선정하여 원칙적으로 500$\pm$10 ㎉가 되도록 식단을 작성하였다. 남녀 정상인에게 섭취시킨 후 섬취전, 섭취후 15분, 30분, 60분, 90분, 120분에 혈당을 조사하고 glycemic index(GI)를 계산하였다. 당뇨식으로 추천된 식단과 일반 가정 식단간 혈당 반응에는 큰 차이가 없이 일반적으로 곡류군의 단위수가 적으면 GI가 낮았으며 곡류군의 단위수가 같을 때는 반찬의 종류에 따라 혈당반응에 큰 영향을 주었다. 곡류군에서는 밀가루 분식이 혈당상승 억제효과가 컸고 잡곡은 보리와 현미가 GI를 낮추는데 효과적이었는데 보리가 현미보다 약간 더 좋았다. 보리나 현미는 15%정도 이상 혼식하여야 효과가 있으며 5% 이하는 효과를 인정할 수 없었다. 백미로 3단위 이상의 곡류군 섭취시는 혈당 상승이 높았으며 채소군의 섭취량과는 뚜렷한 경향이 없었다. GI는 식사후 30분 후의 혈당치와 RAR과는 고도로 유의성 있는 상관관계가 있었다.

  • PDF

반응 표면 분석을 이용한 견과류 첨가 쌀 쿠키의 품질 특성 및 최적화 (Quality Characteristics and Optimization of Rice Cookies with Nuts by Response Surface Methodology)

  • 진소연;이은지;김명현
    • 동아시아식생활학회지
    • /
    • 제24권2호
    • /
    • pp.208-216
    • /
    • 2014
  • The purpose of this study was the optimization of mixing ratio of rice flour, potato starch and soybean flour baking domestic rice cookies with nuts. Response surface methodology, with a central composite design comprising 5 levels and 3 variables, was used to identify the optimal combination of rice flour ($X_1$), potato starch ($X_2$) and soybean flour ($X_3$). The physical properties of 16 samples were analyzed, including color L (p<0.001), color a, color b (p<0.05), spreadability (p<0.05) and hardness (p<0.05). In sensory evaluations, color (p<0.05), flavor, taste (p<0.05), crunch (p<0.05) and overall quality (p<0.05) were differed significantly among the samples. The optimal compositional ratios were 78.90 g rice flour, 18.96 g potato starch, and 15.90 g the soybean flour in 420 g total weight.

호퍼스케일용 고주파 저항방식의 습도센서 및 컨트롤러 개발 (A Development of the Humidity Sensor and Controller Using High Frequency Resistance Method for Hopper-Scale)

  • 서양오;이창근;이동철;홍연찬
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
    • /
    • pp.163-166
    • /
    • 2000
  • This paper describes the principle of humidity sensor using high frequency resistance method for Hopper-Scale that is used in RPC(Rice processing Complex) which is spreaded out in domestic, and we also understand the principle and specificity of controller and humidity sensor. After artworking the humidity sensor and controller circuit, we measure the humidity of the designed system. In this progress, we suggested substitute parts which are easy to get in domestic and also we could propose correct method of humidity detection.

  • PDF

Capillary Electrophoresis를 이용한 국내산 쌀의 품종 판별 (Discrimination of Domestic Rice Cultivars by Capillary Electrophoresis)

  • 류미라;김은영;안미옥;김상숙
    • 한국식품과학회지
    • /
    • 제30권6호
    • /
    • pp.1252-1258
    • /
    • 1998
  • 재배 면적이 비교적 넓은 국내산벼 10품종 백미의 알콜용해성단백질을 capillary elictrophoresis로 분석하고 품종간 단백질 pattern의 차이를 비교 분석하므로써 신속한 품종판별법으로서의 적용가능성을 검토하였다. P-ACN buffer를 이용한 분석조건에서 각 품종은 25분 이내에 분석완료 되었으며 peak pattern의 특징에 따라 동진벼 group, 추청벼 group 및 일품벼 group의 3group으로 분류할 수 있었다. 동진벼, 계화벼, 영남벼가 동진벼 group으로 분류되었으며 이 group에서는 다른 품종에서는 거의 나타나지 않은 peak h가 전체 peak area의 $6{\sim}8%$를 차지하며 뚜렷이 검출되었다. 추청벼 group은 peak h를 제외한 대부분의 peak가 동진벼 group과 비슷하게 나타났으며 추청벼, 오대벼, 만금벼 및 봉광벼 4품종이 해당되었다. 일품벼 group으로 분류된 일품벼, 화성벼 및 화영벼에서는 peak g가 전체 peak의 약 70%라는 압도적인 비율을 나타내었다. 주요 peak의 뚜렷한 차이에 따라 3 group으로 분류하기는 하였으나 일품벼, 오대벼 등의 일부 품종은 단독으로 구별이 가능하였으며 각 group 내에서도 미미하기는하나 구성 peak들을 면밀히 비교 분석하므로써 품종에 따른 특성을 도출할 수 있었다. 또한 다른 분석법과 비교할 때 우리 나라에서 재배면적이 50% 이상으로 가장 많은 동진벼와 추청벼는 각 현미의 윗면, 측면, 앞면의 화상을 이용한 품종판별법에서 서로 오판될 확률이 비교적 높았으나 CE로는 peak h에 의해 서로 쉽게 구분되었다.

  • PDF

유기농자재의 탄소배출량 산정을 위한 전과정평가(LCA) -패화석, 팽연왕겨, 보르도액을 중심으로- (LIfe Cycle Assessment(LCA) for Calculation of the Carbon Emission Amount of Organic Farming Material -With Oyster-shell, Expanded Rice Hull, Bordeaux Mixture Liquid-)

  • 윤성이;양동욱
    • 한국유기농업학회지
    • /
    • 제20권4호
    • /
    • pp.475-490
    • /
    • 2012
  • Since 1997, Korean Ministry of Knowledge Economy and Ministry of Environment have established data on some 400 basic raw and subsidiary materials and process like energy, petro-chemical, steel, cement, glass, paper, construction materials, transportation, recycling and disposal etc by initiating establishment of LCI database. Regarding agriculture, Rural Development Administration has conducted establishment of LCI database for major farm products like rice, barley, beans, cabbage and radish etc from 2009, and released that they would establish LCI database for 50 items until 2020 later on. The domestic LCI database for seeds, seedling, agrochemical, inorganic, fertilizer and organic fertilizer etc is only at initial stage of establishment, so overseas LCI databases are brought and being used. However, since the domestic and overseas natural environments differ, they fall behind in reliability. Therefore, this study has the purpose to select organic farming materials, survey the production process for various types of organic farming materials and establish LCI database for the effects of greenhouse gas emitted by each crop during the process. As for selecting methods, in this study organic farming materials were selected in the method of direct observation of material and bottom-up method a survey method with focus on the organic farming materials admitted into rice production. For the basic unit of carbon emission amount by the production of 1kg of organic farming material, the software PASS 4.1.1 developed by Korea Accreditation Board under Ministry of Knowledge Economy was used. The study had the goal to ultimately provide basic unit to calculate carbon emission amount in executing many institutions like goal management system and carbon performance display system etc in agricultural sector to be conducted later on. As a result, emission basic units per 1kg of production were calculated to be 0.04968kg-$CO_2$ for oystershells, 0.004692kg-$CO_2$ for expanded rice hull, and 1.029kg-$CO_2$ for bordeaux mixture liquid.

아밀로오스 함량이 다른 국내산 쌀가루의 수분-열처리가 쌀국수 품질에 미치는 영향 (Effect of Heat-Moisture Treatment of Domestic Rice Flours Containing Different Amylose Contents on Rice Noodle Quality)

  • 서혜인;류복미;김창순
    • 한국식품영양과학회지
    • /
    • 제40권11호
    • /
    • pp.1597-1603
    • /
    • 2011
  • 쌀가루의 HMT나 아밀로오스 함량이 다른 쌀가루의 혼합 사용이 쌀국수 조리특성과 관능적 품질특성에 미치는 효과를 조사하였다. HMT는 습식제분한 쌀가루를 건조 후 수분 함량을 약 21%로 조절하여 autoclave에서 100, 105$^{\circ}C$로 각각 30분 처리하여 쌀국수 제조에 사용하였다. 사용된 쌀 품종은 국내산으로 고아밀로오스 GM과 중간아밀로오스 CC, 대조구로는 태국산 수입쌀을 사용하였다. 중간아밀로오스 CC를 HMT하여 제조한 쌀국수는 조리손실률과 조리수 탁도 감소를 가져와 대조구 TG와 근접한 결과를 보였으며, 경도와 부착성, 인장강도 증가 등의 기계적 조직감 변화가 있었다. 단일 쌀가루를 사용한 경우 HMT 쌀가루로 쌀국수 제조 시 조리손실률과 조리수의 탁도가 낮아졌고 경도와 인장강도는 증가하였다. 혼합쌀가루 사용 시 무처리 쌀가루를 혼합한 것보다 무처리 쌀가루에 HMT 쌀가루를 혼합한 쌀국수에서 조리손실률과 조리수의 탁도가 낮았고 경도와 인장강도가 증가하였다. 쌀국수의 색도는 HMT로 L값이 낮아져 어두워졌다. 관능검사에 사용된 쌀국수는 상품성과 국내쌀 수급 및 재고미 활용의 시급성을 고려하여 6종을 선별하여 택하였으며 이들을 시중 수입쌀국수와 비교하였다. 쌀국수의 정량적 묘사분석에서 아밀로오스 함량이 낮은 CC는 9점 척도에서 2.3으로 평가되어 무른 것으로 평가되었고 다음은 CC105의 5.4로 상대적으로 다른 시료에 비하여 부드러웠고 이들의 탄력성, 부착성은 수입쌀국수를 포함한 다른 TG, TG+CC105, GM100보다 유의적으로 높았다. 시중 수입쌀국수와 가장 유사하게 조직감이 평가된 것은 TG+CC105로 나타났고 TG는 부착성과 탄력성이 유의적으로 낮은 것으로 평가되었다. 본 연구결과에 의하면 아밀로오스 함량이 다른 품종의 쌀가루를 적절히 혼합하거나, 중간아밀로오스의 국내산 일반 쌀 품종의 쌀가루를 HMT하여 혼합 사용하여 품질특성 및 조직감을 변화시킴으로써 기호에 맞는 쌀국수 제조가 가능할 것으로 판단된다. 다양한 국내산 쌀 품종을 쌀국수 제조에 활용할 수 있도록 추후 더욱 구체적인 가공적성 연구가 필요하다고 여겨진다.

증해 추출 왕겨 분말을 혼입한 무시멘트 모르타르의 강도 특성 (A Strength on the Properties of Non-Cement Mortar containing Rice Husk Powder extracted from Digestion)

  • 조성은;조성원;김영수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 봄 학술논문 발표대회
    • /
    • pp.225-226
    • /
    • 2021
  • Recently, environmental problems have emerged as a major issue all over the world due to an increase in carbon dioxide(CO2). The amount of CO2 generated during cement production accounts for 6% to 8% of domestic CO2 emissions and a solution to reduce CO2 emissions the construction industry is trying to use mineral admixtures to reduce cement. Since digestion has no firing process the advantage of it is that there is no air pollution to occur. In this study, we studied the compressive strength of binary non-cement mortar containing rice husk powder extracted from digestion by the ratio of 10%, 20%, 30%, 40%. As a result, the table flow was increased when the mixing rate of rice husk powder extracted from digestion was higher, and the highest compressive strength was shown when the rice husk powder extracted from digestion mixing rate was 10%.

  • PDF

왕겨보드 제조를 위한 적정 전처리 조건에 관한 연구 (Study on the Optimum Pre-treatment Condition for Manufacture of Rice Hull Board)

  • 이화형;한기선
    • Journal of the Korean Wood Science and Technology
    • /
    • 제28권3호
    • /
    • pp.9-13
    • /
    • 2000
  • 본 연구는 해마다 100만 톤 이상이 생산되는 국내산 왕겨를 이용하여 왕겨보드를 제조함에 있어, 무처리 왕겨로 제조한 왕겨보드의 기계적 성질의 단점을 보완하기 위하여 왕겨를 전처리함으로써 그 물리 기계적 성질을 개선하기 위해 실시되었다. 연구결과를 요약하면, 무처리, 증자처리 및 가성소다로 알칼리처리한 왕겨보드보다 폭쇄처리한 왕겨보드가 휨강도 및 박리강도가 더 높았으며, 이때 적정 폭쇄처리 조건은 압력 20kgf/$cm^2$, 시간 1분과 압력 25kgf/$cm^2$, 1분이었다. 무처리 왕겨보드의 경우 휨강도, 박리강도 모두 KS를 만족시키지 못한 반면, 폭쇄처리 왕겨 보드의 경우 KS PB 18.0형의 기준을 모두 만족시켰으며, PB 대조구와 비교할 때 동등한 강도를 보였다. 기타 왕겨 전처리의 경우에 있어서도 가성소다처리보다는 증자처리가 왕겨보드의 강도를 향상시키는 것으로 나타났다.

  • PDF

오수처리수의 관개가 벼의 생육 및 수확량에 미치는 효과(지역환경 \circled3) (Effect of Reclaimed Sewage Irrigation on Paddy Rice Culture and Yields)

  • 우선호;윤춘경
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2000년도 학술발표회 발표논문집
    • /
    • pp.611-616
    • /
    • 2000
  • Effect of reclaimed sewage on the paddy rice culture was examined by field experiment for two consecutive years. The domestic sewage was treated by the comstructed wetland, and the effluent of the treatment wetland was used for irrigation water. Growth components and yields were compared against the CONTROL plot where conventional fertilization was applied. In general, addition of the reclaimed sewage irrigation which contained high nutrient concentration didn't affect paddy rice culture adversely, and even better growth and more yields were observed. Overall, reclaimed sewage irrigation was thought to be one of practical alternatives for irrigation water.

  • PDF

우리나라 양곡가공공장의 현황분석 (The Profile of Milling Plants in Korea)

  • 정창주;금동혁;강화석
    • Journal of Biosystems Engineering
    • /
    • 제3권1호
    • /
    • pp.47-63
    • /
    • 1978
  • This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

  • PDF