• The Korean Journal of Food And Nutrition
• /
• v.11 no.3
• /
• pp.303-311
• /
• 1998

This study was carried out to determine the blood glucose responses to 10 kinds of typical Korean domestic meals, 9 kinds of eating out meals and 5 kinds of diabetic meals recommended by hospitals. The levels of blood glucose were measured at 15, 30, 60, 90 and 120 minutes after taking 24 kinds of meals(500$\pm$10㎉) and 50g of glucose to healthy volunteers. The blood glucose response areas and glycemic index(GI) were calculated. There was no invariable tendency of blood glucose responses among diabetic meals, general domestic meals and eating out meals. As the units of grain groups were increased, the GI of meals was increase. When the units of grain groups are same, the side dishes also affected the blood glucose responses, however, it is yet unknown what kinds of food materials of side dishes affected the blood glucose responses. Noodles (Chinese style, kalgugsu(Korean home made) and ramen) lowered blood glucose responses compared to steamed rice. Mixing barley and brown rice with polished rich also lowered blood glucose responses, especially when the mixing ratio of them was over the 15%. The lowering efficiency of barely was greater than brown rice. More than three grain units of rice increased the blood glucose response. The GI was significantly correlated with left area ratio(LAR), right area ratio(RAR) and blood glucose levels at 15, 30, 60, 90 minutes. The RAR and blood glucose levels at 30 minutes profoundly affected the GI.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.2
• /
• pp.208-216
• /
• 2014

The purpose of this study was the optimization of mixing ratio of rice flour, potato starch and soybean flour baking domestic rice cookies with nuts. Response surface methodology, with a central composite design comprising 5 levels and 3 variables, was used to identify the optimal combination of rice flour ($X_1$), potato starch ($X_2$) and soybean flour ($X_3$). The physical properties of 16 samples were analyzed, including color L (p<0.001), color a, color b (p<0.05), spreadability (p<0.05) and hardness (p<0.05). In sensory evaluations, color (p<0.05), flavor, taste (p<0.05), crunch (p<0.05) and overall quality (p<0.05) were differed significantly among the samples. The optimal compositional ratios were 78.90 g rice flour, 18.96 g potato starch, and 15.90 g the soybean flour in 420 g total weight.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.163-166
• /
• 2000

This paper describes the principle of humidity sensor using high frequency resistance method for Hopper-Scale that is used in RPC(Rice processing Complex) which is spreaded out in domestic, and we also understand the principle and specificity of controller and humidity sensor. After artworking the humidity sensor and controller circuit, we measure the humidity of the designed system. In this progress, we suggested substitute parts which are easy to get in domestic and also we could propose correct method of humidity detection.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1252-1258
• /
• 1998

Capillary electrophoresis (CE) with rice proteins was used to discriminate 10 domestic rice cultivars in less than 25 min. Most cultivars were differentiated quickly and easily using P-ACN buffer system. CE of rice prolamins allowed classifying ten varieties of Korean rice into three groups. Peak h was characteristic peak for Dongjinbyeo, Gaehwabyeo and Yongnambyeo which were classified into the group of Dongjinbyeo. Chuchungbyeo, Odaebyeo, Mangeumbyeo and Bonggwangbyeo easily differentiated from the group of Dongjinbyeo by the absence of peak h which were classified into the group of Chuchungbyeo. Peak g typical for Illpumbyeo, Hwaseungbyeo and Hwayoungbyeo accounted for 70% of total peak area. They belong to the group of Illpumbyeo. Some cultivars showed specific peak patterns among ten cultivars, Illpumbyeo was differentiated from others by several peaks between peak c and peak f, and the peak d was apparently detected in Odaebyeo not in others. Other minor differences were also found within each group. The result of the study showed that CE has potential for discrimination of rice cultivars. It also possesses the inherent advantages such as low mass requirements, fast seperations, and quantitative analysis through on-capillary UV detection.

• Korean Journal of Organic Agriculture
• /
• v.20 no.4
• /
• pp.475-490
• /
• 2012

Since 1997, Korean Ministry of Knowledge Economy and Ministry of Environment have established data on some 400 basic raw and subsidiary materials and process like energy, petro-chemical, steel, cement, glass, paper, construction materials, transportation, recycling and disposal etc by initiating establishment of LCI database. Regarding agriculture, Rural Development Administration has conducted establishment of LCI database for major farm products like rice, barley, beans, cabbage and radish etc from 2009, and released that they would establish LCI database for 50 items until 2020 later on. The domestic LCI database for seeds, seedling, agrochemical, inorganic, fertilizer and organic fertilizer etc is only at initial stage of establishment, so overseas LCI databases are brought and being used. However, since the domestic and overseas natural environments differ, they fall behind in reliability. Therefore, this study has the purpose to select organic farming materials, survey the production process for various types of organic farming materials and establish LCI database for the effects of greenhouse gas emitted by each crop during the process. As for selecting methods, in this study organic farming materials were selected in the method of direct observation of material and bottom-up method a survey method with focus on the organic farming materials admitted into rice production. For the basic unit of carbon emission amount by the production of 1kg of organic farming material, the software PASS 4.1.1 developed by Korea Accreditation Board under Ministry of Knowledge Economy was used. The study had the goal to ultimately provide basic unit to calculate carbon emission amount in executing many institutions like goal management system and carbon performance display system etc in agricultural sector to be conducted later on. As a result, emission basic units per 1kg of production were calculated to be 0.04968kg-$CO_2$ for oystershells, 0.004692kg-$CO_2$ for expanded rice hull, and 1.029kg-$CO_2$ for bordeaux mixture liquid.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.11
• /
• pp.1597-1603
• /
• 2011

The influence of heat-moisture treatment (HMT) and substitution of rice flour containing different amylose contents on the quality characteristics of rice noodles was investigated. HMT was applied to rice flours with 21% moisture content at 100 and 105$^{\circ}C$ for 30 min. Three rice cultivars were used, including high amylose of Goami (GM) and intermediate amylose of Choochung (CC) as domestic rice flours and imported rice of Taeguk (TG) as a control. HMT and substitution of rice flour with different amylose contents affected the cooking and texture quality of rice noodles. When rice noodles were made of intermediate amylose rice flour with HMT, cooking properties improved with decreased cooking loss and cooking water turbidity and thus were closer to those of control. Especially, the hardness, adhesiveness, tensile strength, and darkness of rice noodles notably increased when HMT rice flour was used. Based on the results of quantitative descriptive analysis for selected rice noodles, the noodles made of HMT CC at 105$^{\circ}C$ (CC105) had high scores for resilience and adhesiveness and low scores for hardness compared with imported commercial rice noodles and other experimental noodles such as TG, HMT GM100, TG+CC, and TG+CC105. In conclusion, rice noodles were made of composite flours containing high amylose and intermediate amylose contents or HMT intermediate amylose content rice flour.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.225-226
• /
• 2021

Recently, environmental problems have emerged as a major issue all over the world due to an increase in carbon dioxide(CO₂). The amount of CO₂ generated during cement production accounts for 6% to 8% of domestic CO₂ emissions and a solution to reduce CO₂ emissions the construction industry is trying to use mineral admixtures to reduce cement. Since digestion has no firing process the advantage of it is that there is no air pollution to occur. In this study, we studied the compressive strength of binary non-cement mortar containing rice husk powder extracted from digestion by the ratio of 10%, 20%, 30%, 40%. As a result, the table flow was increased when the mixing rate of rice husk powder extracted from digestion was higher, and the highest compressive strength was shown when the rice husk powder extracted from digestion mixing rate was 10%.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.3
• /
• pp.9-13
• /
• 2000

Wood demand is increasing more and more, but world has been confronted with decreasing forest resources. Korea has to depend upon foreign wood and wood-based products for more than 95 percent of total domestic demand per year. In order to heighten self-sufficiency for wood supply and demand, we have to develop wood substitutes. Rice hull is the cheapest agricultural by-product we can get in Korea, more over the production of rice hull amounts to 1 million tons per year. This study was carried out to utilize rice hull and to decide the optimum condition of rice hull pretreatment for manufacture of rice hull board. Steam explosion method gave the best result, and the next boiling treatment of 1 hour, the last 1 hour treatment with 1% NaOH solution. Optimum conditions of explosion method were 20kgf/$cm^2-1$ minute and 25kgf/$cm^2-1$ minute. Rice hull board made with exploded rice hull met the KS standard(KS F 3104, 1997) and showed the same strength as a control, PB. And also the 1 hour boiling treatment was more effective than the 1 hour treatment with 1% NaOH solution.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.611-616
• /
• 2000

Effect of reclaimed sewage on the paddy rice culture was examined by field experiment for two consecutive years. The domestic sewage was treated by the comstructed wetland, and the effluent of the treatment wetland was used for irrigation water. Growth components and yields were compared against the CONTROL plot where conventional fertilization was applied. In general, addition of the reclaimed sewage irrigation which contained high nutrient concentration didn＇t affect paddy rice culture adversely, and even better growth and more yields were observed. Overall, reclaimed sewage irrigation was thought to be one of practical alternatives for irrigation water.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.