• 대한화학회지
• /
• 제5권1호
• /
• pp.22-25
• /
• 1961

The attempt to distinguish between graphite and domestic anthracite was means, especially electric resistance. The specific resistance values of various coals and graphites were determined by Wheaston Bridge equipped with more finely adjustable slide wire. The result of graphite was in the below of 0.08 ohm-cm and that of anthracite has $10^{-1}{\sim}10^1$ohm-cm range.

• 약학회지
• /
• 제30권1호
• /
• pp.51-54
• /
• 1986

Fecal samples from Kim-Hae farm animals were examined for the frequency of gram-negative enteric organisms resistant to tetracycline, streptomycin, or penicillin. The propertions of antibiotic resistant to total organisms in fecal specimens of poultry, swine and cow were as follows: 95%, 92%, 70% for tetracycline, 100%, 27%, 9% for streptomycin, 18%, 1%, 1% for penicillin, respectively. The bacteria had multiresistance to antibiotics. These strains had more than one plasmid. From the transformation study, it was concluded that the resistance to streptomycin was attributed to one of these plasmids.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.220-221
• /
• 2014

The various type of polymer such as silicone, modified silicone, polyurethane, etc are being used in domestic construction sealant market. Once sealant is installed in building, it should maintain their specific performances such as preventing moisture, rain, air, etc against environment conditions for several decades. In this study, weather resistance as per polymer type of sealant has been evaluated using QUV accelerated weathering tester. As a result, weather resistance of silicone is highest and modified silicone is lowest in the comparison of other type of polymer.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.395-396
• /
• 2010

본 연구는 최근 국내 초고층 건물의 고강도콘크리트 화재시 내화성능 확보와 관련하여 자체 연구개발한 폴리믹스(PP섬유 + 폴리머분말)를 적용 80MPa 고강도 콘크리트에 대한 내화성능 확인 실험을 실시함으로써, 초고층 펌프압송이 가능한 초고층용 고내화콘크리트를 개발하는데 그 목적이 있다.

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.860-864
• /
• 2012

The contact tip is higher the wear of resistance and the longer life are demanded to GMA welding process. In this study, four different contact tips with three different compositions by two wires were evaluated their wear resistance by measuring in every one hour the area of enlarged hole at the exit side during actual wleding. Experimental results clearly showed that the Cr-containing tips strengthened by precipitation hardening have much better resistance to wear than those made by work hardening. In addition, flux cored wire is excellent abrasion resistance test results showed. Based on these results, the domestic industry, the life of the contact tip to know will be used as basic data.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.426-429
• /
• 1999

In this paper, we have provided the measurement technique of the grounding mesh resistance by field measurements. The standard of measurement is specified in the IEEE Std 81.2-1991 and JEAC 5001-1988, which is the the fall-of-potential method by test-current injection, but this method is difficult to apply at field, where is small around a electric power substation of domestic. For the convenient measurement method, space of assistant probe and quantity of test-current injection are changed step for step. As the result, ' the proposed measurement technique of grounding mesh resistance is that the space of current and potential probes must be fixed at 150rn from a grounding mesh, the test-current injection has to keep 5A or more.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.671-674
• /
• 2000

A children's electric shock accidents have broken out because children can easily insert sharp things in 220V receptacle holes. As the test result of pushing force, children's pushing force was about 2-4kg and the pushing force of sharp things was less than 2kg. Therefore, it is reason for electric shock that children's pushing force is large than pushing force of sharp things. We have measured insulation resistance for the receptacles of five companies during 50 weeks in humid condition. As these results, Insulation resistance for the receptacles of J. Co. had rapidly decreased with lapse of time. As the result for investigating the surface of receptacle by SEM and EDX, Al, Fe and Br, which weren't discovered at original form, were produced. Therefore, the receptacles of J. Co. should be the improved in the quality of insulating material because insulation resistance can be decreased in humid environment

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.440-442
• /
• 2004

The ground resistance of middle scale ground pole was measured by using the 'fall of potential method' suggested by IEEE However, the measured resistance value was lower than the minimum value required To solve this problem. ground pole was set to be used commonly. In this research. ground resistance was measured using the newly suggested method and the results were analyzed to see if they satisfied the domestic regulation The results of this research will be applied to the management works as well as the establishment of new plan.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.621-624
• /
• 2008

콘크리트 구조물에 적용되는 보수재료는 적용되는 환경요인에 따라 품질특성이 다르게 나타난다. 국내의 보수재료에 대한 내구성 평가는 다양한 환경요인에 따른 시험법의 미비로 내구성에 대한 품질성능이 확보되지 않은 실정이다. 본 연구에서는 국내에서 생산되는 보수재료에 대하여 적용환경에 따른 동결융해저항성능을 BS EN 13687에 준하여 시험하였고, 국내시험규격(KS F 4716)과 비교 분석하였다. 연구결과 건습반복과 염수침지동결융해 시험 후의 부착강도 값은 보수재료의 종류 및 시편의 크기에 따라 다소 큰 차이가 나타났다. 보다 양호한 보수재료의 품질관리를 위해서는 적용환경에 따른 다양한 동결융해저항시험방법에 대한 규격제정이 요구된다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제27권1호
• /
• pp.133-151
• /
• 2018

Purpose Global fintech industry is proliferating. Although domestic investment in fintech service is also increasing fast, user acceptance of fintech payment service seems slower than expected. Previous fintech literature mainly focuses on overall characteristics and technical aspects of fintech including security issues and explores factors affecting the service adoption. This study aims to examine crucial factors affecting user's resistance intention to fintech payment service adoption. The research model was formulated based on innovation diffusion theory and status quo bias theory and validated empirically. Design/methodology/approach The proposed research model was empirically validated with 149 responses from college students who have used fintech payment service. The component-based SEM was employed for data analysis. Findings The significant findings are as follow. First, compatibility has significant negative effect and complexity, and perceived risk has a positive effect on user resistance. Second, institutional trust does not show a significant effect on user resistance but has an indirect effect through the mediation of trust in service provider. Finally, trust in service provider shows the significant negative effect on user resistance.