• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.569-571
• /
• 2005

Recent interest in the synchronous reluctance motor has increased in possible applications such as home appliance, hybrid electric vehicles, etc. This paper presents a brief review of the research and development of synchronous reluctance motors, carried out up to now, from the designers' viewpoint. In addition, the key points in the design of synchronous reluctance motors and a new design method for innovating on their rotor structures are discussed.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.575-580
• /
• 2004

The latest equipment automatic Intelligence of digital base done large size equipment appear in succession. That run by voltage electric current(mA, mV, ${\mu}A,\;{\mu}V$) that outline is microscopic of action of accuracy large size equipment of this digital base is bulk. Have received influence that is great in river electric field by installment that use computer. Most of domestic working voltage from service entrance extra-high voltage and working voltage of commercial frequency 60Hz working voltage 220V that use our country outside 1 country in interior of 22.900V for semiconductor use computer use digital installment of appliance as well as various smalls of digital base, middle, large size that safety is these fine voltage electric current that is not enough direct admonition hundred vast damage give can. Also, already act in surge circle and impulse transient phenomena such as several thousands, myriads, strong bit error more than billions time to digital fine electronic circuit by mistake use of using electric facility system of system electric power.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.321-323
• /
• 2009

When power failure occurs at multi-housing complex, auxiliary generator or emergency generator starts to provide power to households. This power is connected to emergency power ELB(Earth Leakage Breaker) at home distribution panel board and supplies power only for emergency light in living room but for heating system, refrigerator and other inevitable apparatuses that are in need of uninterruptible power. Since those domestic appliance are fed from common power line, they are inoperable during power failure. Our research is to resolve this problem by developing compatible relay-drive common/emergency-power ATS (automatic transfer switch) for home distribution panel board. In case of power failure, it transfers automatically and commences to provide power from emergency generator. Through this, Consumers can reach satisfaction where common power loads operate without any problem under both ordinary and power failure condition.

• Journal of Families and Better Life
• /
• v.27 no.4
• /
• pp.141-160
• /
• 2009

Recently, some policies for reducing standby power, which has quite an effect on electricity consumption, have been employed all over the world. This study surveys the present condition of standby power for major electric home appliances during three years and analyzes the result of technical development reducing standby power. It presents how the industry paid attention to applying the technique of reducing standby power to electric appliances and how it affects the product's energy efficiency. We survey the standby power's change for six items, which were selected from the major electric appliances available on the market. It analyzes the difference of standby power consumption between appliances with a standby power reducing technique and those without during the latest three years. The amount of the average standby power is also compared. The comparison data confirms that the industry's effort and application of reducing standby power contribution has contributed to increasing an appliance's energy efficiency. This study restricted the analyzed items to six appliances, which has been a low volunteered involvement in the standby power reducing program. It is important for reducing standby power consumption of appliances because it contributes to saving electric energy at home and abroad. The development of the standby power reducing technique is needed for more appliances. Along with the development of the standby power reducing technique in the industrial field, it also necessary for consumers to enlarge their understanding of standby power reduction for economic, social, and environmental values.

• The Journal of Society for e-Business Studies
• /
• v.24 no.2
• /
• pp.113-124
• /
• 2019

Today many companies are offering IoT-enabled products and place emphasis on security from the planning stage to protect their products and user information from external threats. The present security levels, however, remain low because the time and resources invested in developing security requirements for each device are far from enough to meet the needs of a wide range of IoT products. Nevertheless, vulnerabilities of IoT devices have been reported continuously, which calls for more detailed security requirements for home IoT devices. In this context, this research identified threats of home IoT systems by using Microsoft Threat Modeling Tool. It then suggested measures to enhance the security of home IoT devices by developing security assessment items through comparative analysis of the identified threats, domestic and global vulnerability assessment standards and related research. It also verified the effectiveness of the developed security requirements by testing them against the existing ones, and the results revealed the security requirements developed in this research proved to be more effective in identifying vulnerabilities.

• Korean Institute of Interior Design Journal
• /
• v.22 no.1
• /
• pp.194-202
• /
• 2013

In the modern society, phenomena such as a decrease in population and an increase in urban small houses caused by demographic changes, a decrease in midium-large housing constructions, and the concentration of one to two person families in the capital area cultivated ground for the growth of small house market. In response to these trends, interior coordination becomes a critical factor to be applied to the small houses in order to suit the residents' needs in most convenient, efficient and aesthetic ways. Therefore, an evaluation element is in demand to extract, evaluate and constantly improve the interior coordination elements. This study extracts and analyzes the essential elements required for small houses into spatial structure, system coordination and interior coordination. In domestic cases, most of spatial structure was conventional and linear while in foreign countries, various variations were found to reflect the needs from different consumers. For the system coordination, convenience played the most important role to emphasize on the easy use of digital system and built-in appliance system in domestic cases. However, in foreign countries, safety issue and economic aspects were the most considered when it comes to the interior coordination. In regard to interior coordination, installations of the storages for the limited small spaces that also support as extended spaces were rare to find in both cases for domestic and international settings. It is expected that systematic studies focused on more objective standards for interior coordination shall be implemented to provide indicators to measure the interior coordination cases in the near future.

• 한국HCI학회:학술대회논문집
• /
• 2006.02b
• /
• pp.1-8
• /
• 2006

본 연구는 가전제품의 제품군과 그 기능들에 따라 차별화 가능한 인지적, 감성적 '청각 사용자 인터페이스 디자인 가이드라인(Auditory User Interface Design Guideline)'을 마련하고, 가전제품의 작동기능 정보와 직관적으로 연합 가능한 청각신호(auditory signal)를 제작할 수 있는 지침을 제시하여 GUI 중심의 제품 설계에서 한 차원 확장되고 사용자의 다중감각적 특성이 적용된 디자인 방법을 실무에 적용하고자 하였다. 특히 AUI 에 대한 체계를 확립함으로써 브랜드 정체성(Brand Identity) 및 기업 이미지를 제고할 수 있다는 목적을 함께 고려하였다. 이러한 연구가 필요했던 이유는 가전제품에 대한 소비자의 심적 모형(mental model)과 감성 측면에서의 접근에 대한 요구 때문인데, 이는 AUI 의 체계적 적용이 아닌 임의적 연결(mapping)으로 인한 버저(buzzer) 청각신호의 짜증(annoying) 발생이 빈번한 사례들에서 출발한다. 또한 GUI 의 변화와 수준에 미치지 못하는 AUI 의 업그레이드 필요성과 가전제품에서의 감성 마케팅 경향을 반영하는 의미를 지니고 있다. 이와 함께 멀티미디어 환경의 급속한 확산으로 다중감각적 정보제시(multimodal display)가 요구되는 상황에 걸맞은 시도이다. 본 연구는 특정 가전제품이나 특정 기능이 지니고 있는 인지적, 감성적 차원의 속성을 청각신호(auditory signal)의 다양한 속성들로 유발하는 관계를 추출하고, 이를 형성하는 기본 메커니즘에 대한 경험적 자료를 제시하여, 가전제품의 AUI 디자인에 유용한 가이드라인을 제공하고자 하였다. 그러나 본 논문에서는 연구의 구체적이고 세부적인 결과보다는 전체적인 계획과 진행과정의 절차를 소개하여 관련분야 연구 진행의 참조적 틀을 마련하고자 한다.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.209-214
• /
• 2014

Despite the recession of the global market, the domestic electronic appliance companies dominated TV market in North America. They took both the premium and mid-priced product market and achieved both profitability and volume due to strong product competitiveness and brand power. Despite doing well in the North American market, the domestic TV manufacturers are worried about product development, marketing and sales strategies to remain the continuous competitiveness in the TV market. This study proposes the a sales prediction model of electronic appliances using sales data of S company from the North American market. We develop the sales prediction models based on multiple regression analysis and artificial neural network and compare two models. Especially, this study analyzes the relevance between the TV sales and TV main features in order to improve the price competitiveness or improve the value of TV products.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.6
• /
• pp.394-399
• /
• 2008

There are many attempts to use a fuel cell system as a residential power generation system. The purpose of this study is to investigate the optimal design of a water tank for a hot water system when the fuel cell co-generation system is combined with a domestic hot water supply system. The demands of hot water supply per month per home are investigated in Busan for a year. It showed somewhat large differences between the actual demand and the designed demand of hot water, but the actual capacity of hourly averaged hot water demands is analyzed as $60{\ell}/h$ in this study based on the actual demand. The experiments are performed in the various inlet and outlet locations of nozzles, and the hot water consumption rates. The experimental results are showed that the optimal capacity of the water tank is $200{\ell}$ when the thermal efficiency, the storing capacity of hot water and the space for installation are considered.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.186-193
• /
• 2009

Development and diffusion of a new and renewable energy are acutely required at domestic energy actualities to be inferior as industrialization is accelerated, and use of information electric appliance is increased rapidly. For the diessemination and practical use of new and renewable energy, this paper presents an unified security management system that is efficiently able to acquire operational status date and control distributed generation facilities. Also, the unified security management system is suggested to protect gathered operational status date from unpredictable problems such as computer virus, spy ware, and any other network problems.