• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.240-243
• /
• 2005

A design procedure using spatial Fourier transform is presented for a structural-acoustic coupled radiator that can emit sound in the desired direction with high power and low side lobe level. The design procedure consists of three steps. Firstly, the structural-acoustic coupled radiator is chosen to obtain strong coupling between structural vibration and acoustic pressure. The radiator is composed by two spaces which are separated by a wall. Spaces can be categorized as reverberant finite space and unbounded semi-infinite space, and the wall are composed of two plates and an opening. The velocities on the wall are predicted. Secondly, directivity and energy distribution of radiator are predicted in wave number domain using spatial Fourier transform. Finally, optimal design variables are calculated using a dual optimal algorithm. Its computational example is presented including the directivity and resulting pressure distribution using proposed procedure.

• Journal of Magnetics
• /
• v.10 no.3
• /
• pp.113-117
• /
• 2005

Some polycrystalline ferromagnetic mms are composed of continuously connected nanometer scale islands with random crystallite orientations. The nanometer perturbations of the mm introduce a large number of nearly degenerate local field configurations that are indistiguishable on a macroscopic scale. As a first step, this situation is modelled as a thin ferromagnetic disc coupled by exchange and dipole interactions to a homogeneous ferromagnetic plane, where the disc and plane have different easy axes. The model is solved to find the partial $N\acute{e}el$ domain walls that minimize the magnetic energy. The two solutions give a bistable configuration that, for appropriate geometries, provides an important microsopic ferromagnetic degree of freedom for the mm. These results are used to interpret recent measurements of exchange biased bilayer films.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.47-54
• /
• 1986

Since the wall mobility of bubble magnetic materials havin g the large q (q=Kac/2$\pi$$M_s^2$) like a $YFeO_3$ has been found to be proportional to the wall energy theoretically crystallographical direction dependence of wall energy calculated by the basis on the spin configuration of the bubble wall which lies in the ac plane was compared with the crystallographical direction dependence of wall mobility which was measured by the experiment. The sample was a single crystal of $YFeO_3$ which was cut into plate normal to the C axis and polished t a thickness of about 60${\mu}{\textrm}{m}$ The measurement of the wall mobility was carried out by optical system using the magneto-optic Faraday effect. From the good agreement of the crystallographical direction dependence of wall mobility and will energy it was found that the spin configuration of the bubble wall suggested is fair.

• Korean Journal of Crystallography
• /
• v.11 no.1
• /
• pp.34-41
• /
• 2000

The group-theoretical approach analyzing the domain structure and the domain wall orientations of the ferroelastic crystal was introduced. These theoretical results were investigated by comparing them with the experimental results of several ferroelastic crystals, CsPbCl₃, Pb₃(PO₄)₂, and LiCsSO₄, which were grown by the Czochralski and solution methods, respectively. both results were agreed well and also consistent with those of previous works such s the strain method and the geometrical consideration. The group-theoretical approach showed that the ferroelastic domain walls must be the crystallographical prominent planes with fixed indices and classified by the symmetry elements characterizing the permissible domain walls. So the group-theoretical approach could be suggested as a new method for analyzing the structure of the ferroelastic domain and domain walls.

• Journal of Magnetics
• /
• v.11 no.2
• /
• pp.74-76
• /
• 2006

Dynamic behaviors of transverse domain walls (TDWs) in rectangular shaped thin-film magnetic nanowires with different widths under applied magnetic fields less than the Walker field were studied by micromagnetic simulations. It was found that the velocity of stable TDWs in the viscous region increases from 147 to 419 m/s and their mass decreases from $6.24{\times}10^{-23}\;to\;2.70{\times}10^{-23}kg$ with increasing strength of the applied magnetic field ranging from 5 to 20 Oe for the nanowire with a dimension of 10 nm in thickness and $5{\mu}m$ in length, and 50 nm in width. With increasing the width of nanowires from 50 to 125 nm at a specific field strength of 5 Oe, the TDW's velocity also increases from 147 to 246 m/s and its mass decreases from $6.24{\times}10^{-23}\;to\;5.91{\times}10^{-23}kg$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.3
• /
• pp.248-252
• /
• 2005

The effects of electric field strength and mechanical compressive stress on the displacement of multilayered ceramic actuator, stacked alternatively 0.2 (PbM $n_{1}$3/N $b_{2}$3/ $O_3$)-0.8(PbZ $r_{0.475}$ $Ti_{0.525}$ $O_3$) ceramic thin films and 70Ag-30Pd electrodes were investigated. Because the actuators were designed to stack ceramic layer and electrode layer alternatively, the ceramic-electrode interfaces may act as a resistance to motion of domain wall. so the polarization and strain were affected by the amount of 180$^{\circ}$domain, electric field strength and mechanical compressive stress. Consequently, the change of polarization, displacement with respect to field strength, and mechanical compressive stress were likely to be caused by readiness of the domain wall movement around the ceramic-electrode interfaces.ces.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.10
• /
• pp.896-901
• /
• 2002

The polarization and strain behavior of multilayer ceramic actuators fabricated by tape casting using a PNN-PZT ceramics were investigated in association with electrode size and internal layer number. Spontaneous polarization and strain decreased with increasing electrode size. In addition, the increase of internal layer number brought reduced spontaneous polarization and increased the field-induced strain. Because the actuators structure is designed to stack ceramic layer and electrode layer alternatively, the ceramic-electrode interfaces may act as a resistance to motion of domain wall. To analyze the effect of ceramic-electrode interface, the diffraction intensity ratio of (002) to (200) planes was calculated from X-ray diffraction patterns of samples subjected to a voltage of 200 V. The diffraction intensity ratio of (002) to (200) planes was decreased with increasing electrode size and internal layer number. The diffraction intensity ratio and straining behavior analyses indicate that the Polarization and strain were affected by the amount of 90°domain decreasing with increasing electrode size and internal layer number. Consequently, the change of polarization and displacement with respect to electrode size and layer number is likely to be caused by readiness of the domain wall movement around the interface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.581-581
• /
• 2012

나노스케일에서의 자구체(magnetic domain), 자화벽(magnetic domain wall)에 대한 연구가 활발하게 진행되고 있으며 특히 자화벽의 위치를 임의로 제어할 수 있는 기술을 응용한 메모리 소자에 대한 연구가 활발하다. 반면에 이러한 연구에 필수적인 자구체, 자화벽 이미징 장비는 매우 미비한 상황이다. 이와 같은 자성이미징(magnetic domain image), 자화벽(magnetic domain wall)을 연구하는데 있어 가장 핵심적인 장비가 SEMPA(Scanning Electron Microscopy with Polarization Analysis)이다. 일반적으로 SEM의 경우 고 에너지 빔의 전자 빔을 주사 시키고 이때 발생되는 이차 전자의 수를 2차원상의 영역에 따라 달라지는 비로 형상을 측정하게 된다. 이때 전자의 수 뿐만 아니라 이들의 spin polarization을 측정할 수 있다면 형상뿐 만 아니라 표면에서의 스핀 상태를 동시에 측정할 수 있게 된다. 기 개발된 W-filament source를 이용한 SEMPA는 field emission source에 비하여 전자빔의 세기가 약하며 이차 전자의 수도 적어 spin polarization 감도가 현저히 떨어진다. 또한 초고진공($1{\times}10^{-10}torr$)에서 사용할 수 없어 측정시료의 contamination을 방지할 수 없다. 이러한 문제점들을 보안하기 위하여 field emission source를 이용한 FE-SEMPA를 개발 중이며 2차전자의 spin polarization감도를 증가시키기 위하여 monte carlo simulation과 전산시늉등울 통해 스핀 검출기를 개발 및 연구결과를 발표하고자 한다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.20 no.1
• /
• pp.37-50
• /
• 2016

A large eddy simulation (LES) of a turbulent channel flow is performed by using the third order low-storage Runge-Kutta method in time and second order finite difference formulation in space with staggered grid at a Reynolds number, $Re_{\tau}=590$ based on the channel half width, ${\delta}$ and wall shear velocity, $u_{\tau}$. To reduce the calculation cost of LES, algebraic wall model (AWM) is applied to approximate the near-wall region. The computation is performed in a domain of $2{\pi}{\delta}{\times}2{\delta}{\times}{\pi}{\delta}$ with $32{\times}20{\times}32$ grid points. Standard Smagorinsky model is used for subgrid-scale (SGS) modeling. Essential turbulence statistics of the flow field are computed and compared with Direct Numerical Simulation (DNS) data and LES data using no wall model. Agreements as well as discrepancies are discussed. The flow structures in the computed flow field have also been discussed and compared with LES data using no wall model.

• Coupled systems mechanics
• /
• v.4 no.4
• /
• pp.317-336
• /
• 2015

The present paper deals with the analysis of water tank with elastic separator wall. Both fluid and structure are discretized and modeled by eight node-elements. In the governing equations, pressure for the fluid domain and displacement for the separator wall are considered as nodal variables. A method namely, direct coupled for the analysis of water tank has been carried out in this study. In direct coupled approach, the solution of the fluid-structure system is accomplished by considering these as a single system. The hydrodynamic pressure on tank wall is presented for different lengths of tank. The results show that the magnitude of hydrodynamic pressure is quite large when the distances between the separator wall and tank wall are relatively closer and this is due to higher rotating tendency of fluid and the higher sloshed displacement at free surface.