• 마이크로전자및패키징학회지
• /
• 제27권4호
• /
• pp.47-54
• /
• 2020

활성 도파로와 수동 도파로의 집적은 광집적 회로의 구성에서 필수적인 요소이다. 이를 구현하기 위한 여러 기술 중 버트 조인트는 상당한 장점을 가지고 있다. 그러나 버트 조인트 접합은 높은 광손실을 야기하며, 두 도파로 간의 정렬에 있어서 정확한 공정 제어가 요구되는 구조이다. 본 논문에서는 레이저 다이오드와 spot size converter (SSC)로 구성된 집적 소자를 시뮬레이션하기 위해 beam propagation method을 이용하였다. 상이한 모드 특성을 갖는 두 SSC를 레이저 도파로와 연결하고, 광결합 효율을 시뮬레이션 하였다. 큰 근접장 모드를 가지는 SSC는 낮은 광결합 효율을 보여주나, 원거리 발산각 패턴이 좁고 더 대칭적이다. 테이퍼 구조의 수동 도파로는 원거리 발산각 패턴을 열화시키지 않고 버트 조인트에서 도파로 오프셋의 무의존성과 광결합 효율을 향상시키기 위해 이용되었다. 이를 바탕으로 89.6%의 높은 광결합 효율과 16°×16°의 좁은 원거리장 발산각을 얻을 수 있었다.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1119-1129
• /
• 2014

This study proposes a novel five-level three-phase hybrid-clamped converter composed of only six switches and one flying capacitor (FC) per phase. The capacitor-voltage-drift phenomenon of the converter under the classical sinusoidal pulse width modulation (SPWM) strategy is comprehensively analyzed. The average current, which flows into the FC, is a function of power factor and modulation index and does not remain at zero. Thus, a specific modulation strategy based on space vector modulation (SVM) is developed to balance the voltage of DC-link and FCs by injecting a common-mode voltage. This strategy applies the five-segment method to synthesize the voltage vector, such that switching losses are reduced while optional vector sequences are increased. The best vector sequence is then selected on the basis of the minimized cost function to suppress the divergence of the capacitor voltage. This study further proposes a startup method that charges the DC-link and FCs without any additional circuits. Simulation and experimental results verify the validity of the proposed converter, modulation strategy, and precharge method.

• 한국광학회지
• /
• 제5권4호
• /
• pp.461-465
• /
• 1994

레이놀드 수에 따른 색소 젯트의 공간적인 편평도를 마이켈슨 간섭계를 이용하여 분석하였다. 레이놀드 수 600(유속 12m/s)일 때 색소 젯트의 편평도는 최적 조건을 보였다. 이러한 색소 젯트의 최적 조건하에서 종펌핑 Littman형 색소레이저 빔은 펌프 에너지 0.5-1.0mJ/pulse의 범위에서 단일 종모우드로 발진되었다. 이 때의 선폭은 470MHz이었고, 변환 효율과 빔 발산각은 각각 4.7%, 3mrad이었다.

• 한국레이저가공학회지
• /
• 제9권3호
• /
• pp.7-13
• /
• 2006

Auto focusing system to find optimized focal position of laser beam used for material process has been investigated by using fiber confocal method. Wavelength of laser diode (LD) and diameter of single-mode fiber are 780nm and $5.3{\mu}m$, respectively. Intensity distributions of beam reflected from the surface of mirror and silicon bare wafer have been observed in a gaussian form. Experimental results show that focal position obtained by LD is shifted from one observed from surface scribed by laser about $80{\mu}m$. It is due to the difference of wavelength and each divergence of between LD and laser used for material process. It is confirmed that auto focusing control system through position calibration has operated steadily.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2006년도 추계학술발표대회 논문집
• /
• pp.41-45
• /
• 2006

Auto focusing system to find optimized focal position of laser beam used for material process has been investigated by using fiber confocal method. Wavelength of laser diode (LD) and diameter of single-mode fiber we 780nm and $5.3{\mu}m$, respectively. Intensity distributions of beam reflected from the surface of mirror and silicon bare wafer have been observed in a gaussian form. Experimental results show that focal position obtained by LD is shifted from one observed from surface scribed by laser about $80{\mu}m$. It is due to the difference of wavelength and each divergence of between LD and laser used for material process. It is confirmed that auto focusing control system through position calibration has operated steadily.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.1083-1088
• /
• 2004

This paper deals with the vibration and stability of a circular cylindrical shaft, modeled as a tapered thin-walled composite beam and spinning with constant angular speed about its longitudinal axis, and subjected to an axial compressive force. Hamilton's principle and the assumed mode method are employed to derive the governing equations of motion. The resulting eigenvalue problem is analyzed, and the stability boundaries are presented for selected taper ratios and axial compressive force combinations. Taking into account the directionality property of fiber reinforced composite materials, it is shown that for a shaft featuring flapwise-chordwise-bending coupling, a dramatic enhancement of both the vibration and stability behavior can be reached. It is found that by the structural tailoring and tapering, bending natural frequencies, stiffness and stability region can be significantly increased over those of uniform shafts made of the same material. In addition, the particular case of a classical beam with internal damping effect is also included.

• Structural Engineering and Mechanics
• /
• 제59권1호
• /
• pp.153-186
• /
• 2016

This paper addresses temperature-dependent nonlinear vibration and instability of embedded functionally graded (FG) pipes conveying viscous fluid-nanoparticle mixture. The surrounding elastic medium is modeled by temperature-dependent orthotropic Pasternak medium. Reddy third-order shear deformation theory (RSDT) of cylindrical shells are developed using the strain-displacement relations of Donnell theory. The well known Navier-Stokes equation is used for obtaining the applied force of fluid to pipe. Based on energy method and Hamilton's principal, the governing equations are derived. Generalized differential quadrature method (GDQM) is applied for obtaining the frequency and critical fluid velocity of system. The effects of different parameters such as mode numbers, nonlinearity, fluid velocity, volume percent of nanoparticle in fluid, gradient index, elastic medium, boundary condition and temperature gradient are discussed. Numerical results indicate that with increasing the stiffness of elastic medium and decreasing volume percent of nanoparticle in fluid, the frequency and critical fluid velocity increase. The presented results indicate that the material in-homogeneity has a significant influence on the vibration and instability behaviors of the FG pipes and should therefore be considered in its optimum design. In addition, fluid velocity leads to divergence and flutter instabilities.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.269-269
• /
• 2012

A new ion source has been designed, fabricated, and installed at the NBTS (Neutral Beam Test Stand) at the KAERI (Korea Atomic Energy Research Institute) site. The goalis to provide a 100 keV, 2MW deuterium neutral beam injection as an auxiliary heating of KSTAR (Korea Super Tokamak Advanced Research). To cope with power demand, an ion current of 50 A is required considering the beam power loss and neutralization efficiency. The new ion source consists of a magnetic cusp bucket plasma generator and a set of tetrode accelerators with circular copper apertures. The plasma generator for the new ion source has the same design concept as the modified JAEA multi-cusp plasma generator for the KSTAR prototype ion source. The dimensions of the plasma generator are a cross section of $59{\times}25cm^2$ with a 32.5 cm depth. The anode has azimuthal arrays of Nd-Fe permanent magnets (3.4 kG at surface) in the bucket and an electron dump, which makes 9 cusp lines including the electron dump. The discharge properties were investigated preliminarily to enhance the efficiency of the beam extraction. The discharge of the new ion source was mainly controlled by a constant power mode of operation. The discharge of the plasma generator was initiated by the support of primary electrons emitted from the cathode, consisting of 12 tungsten filaments with a hair-pin type (diameter = 2.0 mm). The arc discharge of the new ion source was achieved easily up to an arc power of 80 kW (80 V/1000 A) with hydrogen gas. The 80 kW capacity seems sufficient for the arc power supply to attain the goal of arc efficiency (beam extracted current/discharge input power = 0.8 A/kW). The accelerator of the new ion source consists of four grids: plasma grid (G1), gradient grid (G2), suppressor grid (G3), and ground grid (G4). Each grid has 280 EA circular apertures. The performance tests of the new ion source accelerator were also finished including accelerator conditioning. A hydrogen ion beam was successfully extracted up to 100 keV /60 A. The optimum perveance is defined where the beam divergence is at a minimum was also investigated experimentally. The optimum hydrogen beam perveance is over $2.3{\mu}P$ at 60 keV, and the beam divergence angle is below $1.0^{\circ}$. Thus, the new ion source is expected to be capable of extracting more than a 5 MW deuterium ion beam power at 100 keV. This ion source can deliver ~2 MW of neutral beam power to KSTAR tokamak plasma for the 2012 campaign.

• Journal of Korea Trade
• /
• 제23권8호
• /
• pp.1-26
• /
• 2019

Purpose - This paper investigates the recent trade collapse, recovery, and prolonged slowdown to shed light on the discussions about whether the current slowdown is structural or cyclical. I examine structural, cyclical, and heterogeneous aspects of the recent trade trends using detailed statistics of a small open economy, South Korea, whose economic success and growth have been heavily dependent on exports. Design/methodology - I use both aggregated and disaggregated trade statistics of South Korea. I apply the following methodologies: 1) I decompose the trade growth into the extensive and the intensive margin and observe the effect of prices over time. 2) I estimate the trade-income elasticities focusing on the world's import demand, separately for goods from the world and from Korea. 3) I compare the drop in goods exports in slowdown and trade collapse, which are the two unusual periods in the recent history when world trade has substantially dropped altogether. Findings - I show that while the last drop of trade after 2015 has cyclical aspects, there is evidence that the continued slowdown from 2012 is structural: 1) the so-called 'China factor' is found in the analysis of trade-income elasticity of the world and China for imports from Korea. 2) The bilateral trade barriers between Korea and its principal trading partners are universally tightening. 3) Firm sizes, destination countries, and the mode of transactions affect disaggregated trade flows during the slowdown periods. Originality/value - This paper contributes to the debate regarding whether the current trade slowdown is structural or cyclical. I provide two concrete evidence that the export drop in 2015 stems from low oil prices: one is the divergence of Korean export value index from its export quantity index, which started in late 2014 when oil prices plunged. I also contribute to the literature by providing evidence that Korea's trade barriers with important trading partners are steadily increasing since 2012 as the protectionist measures toward Korea's export products are steeply increasing after the global financial crisis.

• 영어영문학
• /
• 제56권2호
• /
• pp.329-356
• /
• 2010

Coleridge's fame as a poet rests on the achievement of the mystery poems, "The Anceint Mariner," "Kubla Khan," and "Christabel." Coleridge's achievement in "Christabel" goes far beyond what previous critics have imagined. Coleridge is one of a handful of great writers who are included as representatives of androgyny. Throughout his life, Coleridge was accustomed to point out feminine qualities within himself. "Christabel" exemplifies the kind of writing contemporary feminist theories call l'écriture féminine. L'écriture féminine is not necessarily the creation of women but may rather be the works of those who refuse to identify with the father and the laws of paternal discourse. "Christabel" becomes Coleridge's most daring symbolic story. "Christabel" appears in its full significance as a vehicle for some profound insights into the dynamics of relationships between men and women, fathers and daughters. Through her deformity, Geraldine is actually the casualty of her father's hatred of women, and is the embodiment of all its anti-virtual aspects. The poem shows no bitterness against women, only compassion and remorse. Coleridge is sympathetically presenting Christabel's suffering as a woman at the hands of an overmastering man. Also, "Christabel" demonstrates woman power as well. In fact, the one person whose tales have any real effect within this narrative is the ambiguous Geraldine. Geraldine excels at story-telling, at making words act for her. Perhaps, despite the appearance of the surface, in which men hold all the cards, it is in fact women, or the feminine, so necessary to procreation and creativity, who hold sway here. This apparent dominion of the feminine derives at least partly from Coleridge's use of the conventions of that feminine genre, the Gothic romance. L'écriture féminine is a concept defined by its divergence from a dominant cultural norm. One may speculate that the fragmentary state of "Christabel" and "Kubla Khan" is in fact congruent with this mode of writing. If these poems imply a theoretical écriture féminine, they are by definition "incomplete," for completeness is a standard of patriarchal language and culture. More perplexing even than the other "mystery poems," "Christabel" is the true fragment of the three.