• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.456-459
• /
• 1999

In this paper, we propose a method of unconstrained handwritten numeral recognition using image dithering and multiple modular MLPs. The set of sample numeral patterns is subdivided into clusters which are extended by their radius. On each extended cluster, we constructed MLPs network as the expert recognizer of corresponding cluster. The gating network is also trained by an MLPs to weigh the outputs of expert MLPs. In training and test phase of the recognizer, we utilize the multiple dithered numeral images and the combination of the outputs for corresponding dithered images. Experimental results show that our recognition method works very well.

• 한국광학회지
• /
• 제8권5호
• /
• pp.362-365
• /
• 1997

Mach-Zehnder형 외부 광 변조기나 Homodyne 검출기 같은 간섭계 원리를 이용한 장치에서 최대 또는 최소의 광 출력을 유지하도록 두 입력 광 사이의 위상 차를 제어하는 새로운 방법을 제시하였다. 이 방법은 Steepest Descent 알고리즘의 변형된 형태로 Delta Modulation 이론으로 성능을 해석할 수 있다. 이 방법은 기존의 흔들림(dithering) 방법을 적용하기 어려운 저속 펄스가 사용되는 간섭계 장치에도 사용할 수 있다.

• 제어로봇시스템학회논문지
• /
• 제20권4호
• /
• pp.437-442
• /
• 2014

Due to electrical cross-coupling between modulation voltage and photodetector output in a closed-loop fiber optic gyro, deadzone inevitably occurs. In this paper, deadzone error by cross-coupling effect was analyzed and the overcoming method was suggested. Simulation and measurement results show the main reason for deadzone is mainly related to electrical cross-coupling, and it can be effectively reduced by square-wave dithering method.

• Journal of Mechanical Science and Technology
• /
• 제16권4호
• /
• pp.485-491
• /
• 2002

The gyroscopes have been used as a suitable inertial instrument for the navigation guidance and attitude controls. The accuracy as very sensitive sensor is limited by the lock-in region (dead band) by the frequency coupling between two counter-propagating waves at low rotation rates. This frequency coupling gives no phase difference and an angular increment is not detected. This problem can be overcome by the mechanical dithering. The purpose of the mechanical dithering is to suppress the dead band, oscillate the monoblock about the rotation axis and add an external rotation rate. This paper presents the theoretical considerations of the mechanical performances of dither on the basis of the loading condition and angular characteristics due to the piezoelement deformation and the validity of theoretical equations are compared through FEM (Finite Element Method) simulations.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.278-281
• /
• 2009

In this paper, we propose a fast partial distortion algorithm using normalized dithering matching scan to get uniform distribution of partial distortion which can reduce only unnecessary computation significantly. Our algorithm is based on normalized dithering order matching scan and calibration of threshold error using LOG value for each sub-block continuously for efficient elimination of unlike candidate blocks while keeping the same prediction quality compared with the full search algorithm. Our algorithm reduces about 60% of computations for block matching error compared with conventional PDE (partial distortion elimination) algorithm without any prediction quality, and our algorithm will be useful to real-time video coding applications using MPEG-4 AVC or MPEG-2.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.351-354
• /
• 2002

The new enhanced method of temperature control need not any reference temperature, the system itself can find the melting temperature of gallium as a reference point by dithering input heat flux. If gallium is in melting state, the latent heat of fusion works, so gallium temperature does not change on dithering input heat flux. Also, the control method can determine the state of gallium; solid, liquid, or melting state by investigating the temperature in gallium. We apply this new temperature stabilization method to stabilize a Fabry-Perot cavity, which serves as a ultimate length measurement technique. We achieved 1 mK-temperature stability and 1.5426 nm/ 95 mm-length stability over 10 hours.

• 제어로봇시스템학회논문지
• /
• 제12권6호
• /
• pp.608-613
• /
• 2006

Any input acceleration that bends RLG dithering axis causes flexure error, which is a source of the noncommutative error that can not be compensated by simply using integrated gyro sensor output. This paper introduces noncommutative error equations that define attitude errors caused by flexure errors. In this paper, flexure error is classified as sensor level error if the sensing axis coincides with the dithering axis and as system level error if the two axes do not coincide. The relationship between gyro output and the rotation vector is introduced and is used to define the coordinate transformation matrix and angular motion. Equations are derived for both sensor level and system level flexure error analysis. These equations show that RLG based INS attitude error caused by flexure is directly proportional to time, amount of input acceleration and the dynamic frequency of the vehicle.

• International Journal of Internet, Broadcasting and Communication
• /
• 제16권1호
• /
• pp.29-35
• /
• 2024

TCP is considered as one of the major candidate transport protocols even for constrained IoT networks..In our previous work, we investigated the congestion control mechanism of the uIP TCP. Since the uIP TCP sets the window size to one segment by default, managing the retransmission timer is the primary approach to congestion control. However, the original uIP TCP sets the retransmission timer based on the fixed RTO, it performs poorly when a radio duty cycling mechanism is enabled and the hidden terminal problem is severe. In our previous work, we proposed a TCP retransmission timer adjustment scheme for uIP TCP which adopts the notion of weak RTT estimation of CoCoA, exponential backoffs with variable limits, and dithering. Although our previous work showed that the proposed retransmission timer adjustment scheme can improve performance, we observe that the scheme often causes a node to set the retransmission timer for an excessively too long time period. In this work, we show that slightly modifying the dithering mechanism of the previous scheme is effective for improving TCP fairness.

• 한국정보통신학회논문지
• /
• 제15권7호
• /
• pp.1543-1551
• /
• 2011

기존에 ADPLL(All Digital Phase Locked Loop)에서는 DCO(Digitally Controlled Oscillator)의 해상도를 향상시키기 위해 주로 디더링(dithering) 기법이 사용되었다. 본 논문에서는 디더링 방식에서 발생하는 문제점을 보안하고자 DAC(Digital-to-Analog Converter)를 이용한 DCO의 해상도 확보 방법을 제안하였다. 주파수 컨트롤은 coarse와 fine 바랙터(varactor) bank 그리고 DAC 바랙터에 의해서 이루어지며, coarse와 fine bank는 PMOS 바랙터로, DAC 바랙터는 NMOS 바랙터로 구현하였다. 각 바랙터 bank는 8비트의 디지털 입력으로 컨트롤된다. $0.13{\mu}m$ CMOS 공정을 이용하여 설계된 DCO는 약 2.8GHz~3.5GHz의 주파수 범위에서 발진하며 660MHz의 대역폭을 갖는다. DCO의 출력 주파수를 측정한 결과 해상도는 2.8GHz대역에서 73Hz이다. 설계된 DCO는 1M 옵셋(offset)에서 -119dBc/Hz의 위상 잡음 특성을 보이며, 1.2V 전원에서 4.2mA의 전류를 소모한다. 칩 면적은 PAD를 포함하여 $1.3mm{\times}1.3mm$이다.

• 한국인터넷방송통신학회논문지
• /
• 제22권1호
• /
• pp.45-50
• /
• 2022

본 논문에서는 채널에서 발생되는 부호간 간섭을 줄이기 위한 적응 등화 알고리즘에서 dither 신호를 이용하는 DSE-MMA와 DQE-MMA 의 등화 성능을 비교하였다. 이들 알고리즘은 기존 MMA의 연산량을 줄이기 위하여 등장하였으며, 적응을 위한 오차 신호를 얻는 과정에서 dither 신호를 부가한 후 1 또는 N 비트의 양자화를 수행함으로서 양자화 오차 성분이 independent and identical 분포하도록 하여 적응 알고리즘의 robustness 성능을 개선할 수 있지만 정상 상태에서 MSE 성능이 열화된다. 논문에서는 동일한 채널과 신호대 잡음비에서 동일한 개념의 dithering에 의한 DSE-MMA와 DQE-MMA의 적응 등화 성능을 시뮬레이션을 통해 직접 비교하였다. 시뮬레이션 결과 DQE-MMA가 수렴 속도를 제외한 모든 성능 지수의 잔여량에서 DSE-MMA보다 우월함을 확인하였다.