• The Journal of Asian Finance, Economics and Business
• /
• 제9권7호
• /
• pp.17-26
• /
• 2022

This paper analyzes the comparative advantages and development prospects of the China (Anhui) Pilot Free Trade Zone. Based on a SWOT analysis method, this study finds that the Anhui Pilot Free Trade Zone has a set of comparative advantages, including location advantage, rich resources, industrial transformation and new industries, technological innovation capabilities, new patterns for development, and policy support. In recent years, by leveraging its key resources, Anhui Province has been committed to developing an open economy. Furthermore, its economic vitality has increased significantly under preferential policies such as the Belt and Road Initiative, the China-Europe International Freight Shuttle, and the Yangtze River Economic Belt Development Plan. As a result, the total foreign trade has continued to grow. The findings of this study highlight that the comparative advantages are of great significance to the development of the Anhui Pilot Free Trade Zone, which helped expand the scope and openness of the regional economy and foreign investment. However, to achieve the development objectives of the Anhui Pilot Free Trade Zone as planned, these comparative advantages must be developed and converted into a set of sustainable competitive advantages for the regional economy. Therefore, a few development suggestions are put forward.

• 대한치과보철학회지
• /
• 제32권4호
• /
• pp.526-552
• /
• 1994

The extent and direction of movement of removable partial dentures during function are influenced by the nature of the supporting structures and and the design of the prosthesis. Since forces are transmitted to the abutment teeth through occlusal rests, guide planes and direct retainers during functional movements, proper design based on the avaialble research data will maintain the health of abutment teeth and their supporting structures. The purpose of this in vitro study is evaluating stress distribution clinically around the abutment teeth prepared following 4-type clasping systems for unilateral free-end removable partial dentures. Three-Dimensional Photoelastic Stress Analysis method was used because it shows a visual display of stresses of the simulated abutment teeth and residual ridges and reveals stress concentration that can be read at any given points in terms of direction and magnitude. For this study, the author fabricated 4 mandibular photoelastic epoxy models missing left 1st and End molar. Epoxy models were duplicated and 4 unilateral removable partial dentures were construe- ted in accordance with 4-type direct retainers. Unilateral free-end removable partial dentures were positioned on their own models. 6kg force was loaded on the every removable partial dentures of the epoxy model on the central fossa of mandibular left 1st molar vertically by the loading device. After the stress was frozen in a stress freezing furnace, 6 specimens of 6-mm thickness were made from every epoxy model and examined with the circular polariscope. The results were as follows : 1. Generally I-bar clasp revealed the most favorable stress distribution around the abutment teeth. 2. At the end portion of the free-end ridge, Back action clasp showed the highest stress concentration at the bucco-lingual and top portions of the residual alveolar ridge. 3. At the distal area of the abutment teeth, Akers clasp and Roach clasp showed higher stress concentration bucco-lingually and apically than the others. 4. To the abutment tooth, I-bar clasp showed the least stress distribution bucco-lingually but the others showed irregular stress distribution. 5. At the mesial area of the abutment teeth, the order of effective stress distribution was I-bar clasp, Back-action clasp, Akers clasp and Roach clasp. There was big difference of stress distribution between them. 6. At the right 2nd premolar and 1st molar, the stress concentration of Akers clasp was a little high but that of I-bar clasp was low.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권6호
• /
• pp.227-235
• /
• 2006

In this paper, autonomous separation methodology of faulted section based on network is proposed newly, which can minimize the outage effect as compared with the existing center-based faulted section separation method by determining and separating autonomously the faulted section by the free operation information exchange among IEDs on the feeder of distribution system. The all IEDs is designed in network in which client/server function is possible in order to separate autonomously the faulted section using PtP(Peer to Peer) communication. Also, Inference based solution of IED for the autonomous faulted section separation is designed by rules obtained from the analyzing results of distribution system topology. Here, the switch IEDs transmit on network the fault information utilizing on multi-casting communication method, at the fame time, determine selfly whether they operates or not by inferencing autonomously the faulted section using the inference-based solution after receiving the transmitted information. Finally, in order to verify the effectiveness and application possibility of the proposed methodology, the diversity fault cases are simulated for the typical distribution system.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 춘계학술대회 논문집
• /
• pp.126-129
• /
• 2007

In this paper, an iterative MAP approach using a Bayesian model based on the lognormal distribution for image intensity and a GRF for image texture is proposed for despeckling the SAR images that are corrupted by multiplicative speckle noise. When the image intensity is logarithmically transformed, the speckle noise is approximately Gaussian additive noise, and it tends to a normal probability much faster than the intensity distribution. The MRF is incorporated into digital image analysis by viewing pixel type s as states of molecules in a lattice-like physical system defined on a GRF. Because of the MRFGRF equivalence, the assignment of an energy function to the physical system determines its Gibbs measure, which is used to model molecular mteractions. The proposed adaptive iterative method was evaluated using simulation data generated by the Monte Carlo method. In the extensive experiments of this study, the proposed method demonstrated the capability to relax speckle noise and estimate noise-free intensity.

• Smart Structures and Systems
• /
• 제25권6호
• /
• pp.669-678
• /
• 2020

This paper focuses on the free vibration analysis of axially functionally graded (FG) Euler-Bernoulli beams. The material properties of the beams are assumed to obey the linear law distribution. The complexities in solving differential equation of transverse vibration of composite beams which limit the analytical solution to some special cases are overcome using the Differential Transformation Method (DTM). Natural frequencies and corresponding normalized mode shapes are calculated. Validation targets are experimental data or finite element results. Different parameters such as reinforcement distribution, ratio of the reinforcement Young's modulus to the matrix Young's modulus and ratio of the reinforcement density to the matrix density are taken into investigation. The delivered results prove the capability and the robustness of the applied method. The studied parameters are demonstrated to be very crucial for the normalized natural frequencies and mode shapes.

• 대한조선학회논문집
• /
• 제43권5호
• /
• pp.550-559
• /
• 2006

A design procedure for a ship with minimum total resistance was developed using a numerical optimization method called SQP(Sequential Quadratic Programming) and a CFD technique based on the Rankine source panel method with the nonlinear free surface boundary conditions. During the whole optimization process the geometry of the hull shape was represented based on the NURBS(Non-uniform rational B-spline) technique and the modification of the hull shape was controlled using the Bell-shaped distribution function to keep the fairness of the hull shape before and after the hull modification. The numerical analysis was carried out using 4000TEU container ship in the towing tank facility installed in the Pusan national university to know the validity of the developed algorithm for this study. As the results of the numerical analysis it proved that the resistance of the optimized hull is conspicuously reduced in comparison with the original hull in a wave-making resistance point of view.

• 대한전자공학회논문지SD
• /
• 제39권12호
• /
• pp.1071-1079
• /
• 2002

본 논문에서는 액정 셀에서 전압에 따른 액정 거동을 수치 해석적으로 계산하는 방법과 그 적용 예를 보고한다. 액정 거동을 해석하기 위해 복잡한 구조에 적용이 용이한, 3차원 유한요소법을 사용하여 액정 셀 내부의 전압 분포를 계산하였다. 액정 셀 내부에 대한 자유에너지 밀도를 고려하였으며, 에릭슨-레슬리(Ericksen-Leslie) 방정식과 라플라스(Laplace) 방정식을 해석함으로서 액정 셀의 스위칭 특성을 계산하였다. 액정 방향자 분포를 이용하여 액정 셀의 광투과 특성을 Berreman's 4$\times$4 방법으로 계산하였고, 문턱 전압과 응답 속도를 확인하였다.

• 한국가스학회지
• /
• 제18권5호
• /
• pp.52-59
• /
• 2014

일반적으로 황분계 부취제는 연료가스로 인한 가스중독, 발화, 폭발 등의 사고를 방지하고, 배출가스에 의해 연료 가스 누출의 즉각적으로 손쉽게 검출할 수 있도록 LPG, 그리고 도시가스와 같은 연료가스에 첨가 사용하고 있다. 본 연구에서는 기존의 황을 함유한 가스용 부취제를 대체하여 연료의 저황분화와 금속 부식성을 낮출 수 있는 LPG 연료용 비황분계 부취제 개발을 위하여 실험하였다. 비황분계 부취제는 황을 함유하지 않는 12개의 부취물질을 선정하였으며, 직접 관능법에 의한 취질과 취기 평가를 실험하였다. 최종 선정된 혼합 부취물질은 methyl isovalerate, methyl acrylate, 2-ethyl-3-methyl pyrazine이며, 이때 조성비는 50% : 40% : 10% 이다. 최종 비황분계 부취제(K-Petro S-Free)는 LPG 연료에 40 wt ppm 혼합하여 품질평가, 금속 부식성 평가 그리고 장기 안정성 평가를 실험하였다. 이 때 LPG 연료용 비황분계 부취제는 국내 LPG 연료의 품질기준을 모두 만족하였다. 또한 금속에 대한 부식성에는 영향이 없으며, 60일간의 장기 안정성 평가에서 LPG연료의 조성에 영향을 주지 않았다. 따라서 최종 선정된 비황분계 부취제(K-Petro S-Free)는 LPG 연료의 첨가제로서 가능성을 보여주고 있다.

• Communications for Statistical Applications and Methods
• /
• 제24권5호
• /
• pp.507-518
• /
• 2017

Volatility plays a crucial role in theory and applications of asset pricing, optimal portfolio allocation, and risk management. This paper proposes a combined model of autoregressive moving average (ARFIMA), generalized autoregressive conditional heteroscedasticity (GRACH), and skewed-t error distribution to accommodate important features of volatility data; long memory, heteroscedasticity, and asymmetric error distribution. A fully Bayesian approach is proposed to estimate the parameters of the model simultaneously, which yields parameter estimates satisfying necessary constraints in the model. The approach can be easily implemented using a free and user-friendly software JAGS to generate Markov chain Monte Carlo samples from the joint posterior distribution of the parameters. The method is illustrated by using a daily volatility index from Chicago Board Options Exchange (CBOE). JAGS codes for model specification is provided in the Appendix.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1456-1458
• /
• 1999

As the system reliability of power supply is highly increased, we need distribution maintenance techniques without any power interruption. To meet such an increasing demand, a groat deal of hot line work on the high voltage overhead distribution lines has been carried out. In this regard, Hot line work techniques has being applied widely. However, hot line work techniques can not cover all kinds of work without interruption. To cope with those problems, the temporary power supply work technique such as bypass cable truck technique, temporary switch technique and mobile transformer technique was developed and applied. This paper presents the most optimal method according to distribution work contents through the comparison and analysis the characteristis and problems of the existing various work techniques. Also this paper suggested the countermeasers of the prsent problems.