• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.16-18
• /
• 2012

LED lighting systems that combine lighting capability, emotional and physiological characteristics are required for lighting source and multifunctional applications. In this work, Simulation studies using optical analysis software packages, Light Tools, are presented. This is done to estimate the uniformity ratio of illuminance and photosynthetic photon flux density (PPFD) of the periodic 2D lattice arrangements, such as square, diamond, two-way bias quadrangular, hexagonal, and Kagome lattices, under the same transmissivity, absorptance and reflectivity. It has been found out that the two-dimensional Kagome lattice arrangement exhibited high uniformity ratio of illuminance and PPFD compared to other lattices. Accordingly, these results can be used to guide a design and improve the lighting environment which in turn would maximize the uniform distributions of illuminance.

• 상하수도학회지
• /
• 제19권3호
• /
• pp.318-322
• /
• 2005

We applied a commercially available computational fluid dynamics model, FLOW-3D, to design a settling basin inlet structure for the intended O sewage plant. In addition, we analyzed the extent to which the inlet sewage water was distributed as a result, firstly, of the location and width of a submerged baffle wall and, secondly, of the opening ratio of a baffle wall with opening holes. The application results show that the flow is unstable due to the generation of eddies in both sides of the submerged baffle wall when the submerged baffle wall is located close to the inlet. The eddies and subsequent instability also occur when the submerged baffle wall is located close to the baffle wall with opening holes. Moreover, the discharge that passes through the midsection of the settling basin increases as the width of the submerged baffle wall increases. At the O sewage plant, when the submerged baffle wall with a width of 2.4 m was located 2 m from the inlet structure and the opening ratio of the baffle wall was 7 percent, the most satisfactory distribution of the inlet sewage water occurred at the entrance of the settling basin.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1390-1398
• /
• 1999

A numerical analysis for ROT sparger of PWR(Pressurized Water Reactor) is carried out. Computation is performed to investigate the flow characteristics as the change of design factor. As the result of this study, RDT sparger's flow resistance coefficient is K=3.53 at the present design condition if engineering mar&in is considered with 20%, and flow ratio into branch pipe is $Q_s/Q_i=0.41$. Velocity distribution at exit is not uniform because of separation in branch pipe. In the change of inlet flow rate and section area ratio of branch pipe for main pipe, flow resistance coefficient is increased as $Q_s/Q_i$ decreasing, but in the change of branch angle and outlet nozzle diameter of main pipe, flow resistance coefficient is decreased as $Q_s/Q_i$ decreasing. As the change rate of $Q_s/Q_i$ is the larger, the change rate of flow resistance coefficient is the larger. The change rate of pressure loss is the largest change as section area ratio changing. The optimal design condition of sparger is estimated as the outlet nozzle diameter ratio of main pipe is $D_s/D_i=0.333$, the section area ratio is $A_s/A_i=0.2$ and the branch angle is ${\alpha}=55^{\circ}$.

• 대한핵의학회지
• /
• 제31권4호
• /
• pp.421-426
• /
• 1997

[$^{18}F$]FMBS는 도파민 $D_2$ 수용체 방사성추적자로서 유망한 성질을 지니고 있다. [$^{18}F$]FMBS는 비교적 높은 특이결합/비특이결합 비를 제공하며, 그 체내결합은 도파민 $D_2$ 수용체에 대하여 높은 특이성과 선택성을 보인다. 도파빈 $D_2$ 수용체 측정을 위한 보다 적합한 PET 방사성추적자를 얻기 위해서는 [$^{18}F$]FMBS의 낮은 뇌섭취와 느린 역학을 개선할 수 있는 화학적 구조의 변형이 시도되어야 하며, [$^{18}F$]FMBS는 이러한 시도의 골격이 될 수 있을 것으로 믿는다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.13-18
• /
• 2009

Flight vehicles such as wheel wells and bomb bays have many cavities. The flow around a cavity is characterized as an unsteady flow because of the formation and dissipation of vortices brought about by the interaction between the free stream shear layer and the internal flow of the cavity. The resonance phenomena can damage the structures around the cavity and negatively affect the aerodynamic performance and stability of the vehicle. In this study, a numerical analysis was performed for the cavity flows using the unsteady compressible three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equation with Wilcox's turbulence model. The Message Passing Interface (MPI) parallelized code was used for the calculations by PC-cluster. The cavity has aspect ratios (L/D) of 2.5 ~ 7.5 with width ratios (W/D) of 2 ~ 4. The Mach and Reynolds numbers are 0.4 ~ 0.6 and $1.6{\times}106$, respectively. The occurrence of oscillation is observed in the "shear layer and transient mode" with a feedback mechanism. Based on the Sound Pressure Level (SPL) analysis of the pressure variation at the cavity trailing edge, the dominant frequencies are analyzed and compared with the results of Rossiter's formula. The dominant frequencies are very similar to the result of Rossiter's formula and other experimental data in the low aspect ratio cavity (L/D = ~ 4.5). In the large aspect ratio cavity, however, there are other low dominant frequencies due to the leading edge shear layer with the dominant frequencies of the feedback mechanism. The characteristics of the acoustic wave propagation are analyzed using the Correlation of Pressure Distribution (CPD).

• 대한기계학회논문집B
• /
• 제36권3호
• /
• pp.301-307
• /
• 2012

정밀한 물질분배기관인 인체 기관지의 기능을 이해하기 위해서는 호흡에서 발생하는 다양한 유동 및 형상 조건에서 압력손실특성을 파악하는 것이 필수적이다. 본 연구는 기관지 구조의 기본 단위인 분지관의 층류 흡기유동 압력손실을 수치해석을 통해 확인하였다. 인체 기관지에 대한 관찰에서 보고되는 비대칭 형상과 유량분배비율 범위 안에서 압력손실계수 K 는 Re 와 관의 길이만의 함수로 다음과 같이 표현이 가능하며 $K{\propto}Re^{-1}(\frac{L}{d})^{3/4}$, Re<100, $K{\propto}Re^{-1/2}\(\frac{L}{d}\)^{1/2}$, $Re\geq100$, 이는 대칭 분지관의 관계식과 동일한 것이다. 연속분지로 입구 유속분포가 편향될 경우 분지관 압력손실의 변화는 4% 미만이었으며 분지가 반복될수록 그 차이는 줄어들어 무시할 만하였다.

• 정보처리학회논문지D
• /
• 제9D권1호
• /
• pp.75-80
• /
• 2002

Putnam은 소프트웨어 프로젝트에 참여하는 인력이 Rayleigh 분포를 따르는 SLIM 모델을 제시하였다. 이 모델에서 인력분포를 얻기 위해서는 총 개발노력과 개발 난이도를 추정해야 한다. 프로젝트 개발에 참여할 것인지 여부를 결정하기 위해서는 소프트웨어 생명주기의 초기단계에서 이 모수들을 보다 적확히 추정하는 것이 필요하다. Putnam은 시스템 속성들 중 강한 상관관계가 있는 변량을 제거하고 나머지 변량들만으로 총 개발노력과 개발 난이도를 추정하였다. 그러나 통계적 방법에 따라 변량들이 다르게 선택되며 모델의 성능에 차이가 발생한다. 본 논문은 Putnam 방법 대신 주성분분석을 이용하여 최적의 시스템 속성을 선택하였다. 모델의 성능분석 결과 주성분분석 방법이 Putnam의 방법보다 9.85% 성능향상을 보였다. 또한, 제안된 모델은 단순하고 쉽게 구현할 수 있다.

• STI Policy Review
• /
• 제3권2호
• /
• pp.111-129
• /
• 2012

The integration of products and services is being expanded in both manufacturing and service companies such as in Apple's iPod & iTunes, Amazon's Kindle, and Hyundai Motor Company's Mozen. This phenomenon has recently accelerated due to multiple factors including market change, lessening of differences in quality of products or services, the paradigm of participation and sharing, and deindustrialization and evolution toward becoming a service economy. The objective of this paper is to investigate and analyze the status and characteristics of integration of products and services in Korean firms and to suggest policy directions promoting this integration. Towards this purpose, income statements from the Korea Listed Companies Association (KLCA) database of companies listed on the Korea Stock Exchange are analyzed regarding the servitization of manufacturing firms as well as the productization of service firms. In addition, this research investigates the Korean Innovation Survey 2011 database for the service sector and 2010 database for the manufacturing sector in order to evaluate R&D activity in each. In the manufacturing sector, the average ratio of service sales (servitization) was low at 0.208, with bias in the level and distribution of ratios associated with the manufacturing sector. 18 out of a total of 23 sectors (78%) have low servitization, showing there's a long way to go for servitization in the Korean manufacturing sector. In the service sector, the average ratio of product sales (productization) was 9.53%, which is relatively high compared to that of the manufacturing sector. However, the distribution of ratios is also biased, as with the manufacturing sector. Based on this analysis, policy directions are proposed in terms of 1) R&D, 2) concept boost, 3) R&D result spread, 4) statistics, 5) infrastructure and 6) green growth.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.93-101
• /
• 2000

The characteristics of spray nozzle have been quantified with the measurement of fluorescence and Mie scattering images. To correct the attenuation of the incident light sheet, a sequential double-pass light sheet system and the geometrical averaging of two images was implemented. Quantitative mass flux distribution of spray was obtained from fluorescence image. 3-D image is reconstructed using 2-D radial images. Sauter mean diameter (SMD) distribution was determined using the ratio of fluorescence signal intensity and Mie scattering signal intensity and the values were quantified with PDP A data. The measurement of mass flux and SMD using planar imaging technique agee with PDP A data fairly well in the low density region. However, in dense region， there are significant errors caused by secondary scattering. It was found that the planar imaging technique provides many advantages over the point measurement technique, such as PDP A, and can be implemented for quantitative measurement, especially in low density region.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.495-498
• /
• 2006

Optical profile and spectral absorption of suspended solids in waters of Sanya bay was measured on August 8-14, 2003. Optical profile was taken by using MicroPro optical profile. Apparent optical indexes, vertical diffuse attenuation coefficient ($K_d$) and water leaving radiance (Lw), were calculated. $K_d$ at the blue end of the spectrum was greater than that at the red end of the spectrum in waters near Sanya River mouth, however, in waters near open sea, $K_d$ at the blue end of the spectrum was smaller than that at the red end of the spectrum. Distribution of water leaving radiance was relatively higher in waters near Sanya River mouth, but relatively weaker in near open sea water. Spectral absorption of suspended particulates was also measured. Results showed that the spectral absorption of chlorophyll a was greater in waters near Sanya river mouth, but relatively weaker in waters near open sea, which indicated higher concentration of phytoplankton in waters near Sanya river mouth. Except for water at the 5th sampling station, the ratio of spectral absorption of chlorophyll a to total suspended particulates in surface waters was greater than that in bottom waters at all stations.