• 한국해양학회지
• /
• 제12권2호
• /
• pp.57-66
• /
• 1977

무기물에서 유기물을 생산하는 곳으로서 뿐만 아니라 인류의 마지막 식량공급처로서의 해양에 대한 기초생산의 중요성이 날로 높아져 국제인도양조사때나 Kuroshio해역조사때 생산력이 측정되었고 북서태평양(Sorokin and Koblentz-Miskke; 1958, Ichimura and Saijo; 1959, Saijo and Ichimura; 1960, Aruga and Monsi; 1962, 천촌;1963), 인도네시아 주변해역(Doty et al;1963)등에서도 기초생산이 측정된 바 있다. 일본의 주요 9개만에서는 월별측정(송평 등;1964)이 되었다. 우리 나라 연안에서는 최와 정(1966)이 $C^{14}$를 이용하여 광합성량을 측청하였고 Kang(1967) 은 수영만에서 계절별로 산소소모에 의한 광합성량을 측정했다.다.

• 상하수도학회지
• /
• 제23권1호
• /
• pp.121-128
• /
• 2009

Objectives of this study were to investigate influencing factors of detention time, particle size distribution, and filter medium characteristics for waterworks sludge dewatering. The stepped pressure filtration was carried out with lab scale apparatus and the filter press pilot test for dewatering was conducted at the water treatment plant. Effects of filter medium and polymer dose were examined through observing water content and dewatering velocity and cyclic dewatering rate with filter press pilot test. Relationships among detention time, particle size distribution and filtration resistance were analyzed. Prolongation of sludge detention time was found to cause blinding phenomenon in cake and filter medium and to decrease dewatering process efficiency. The average specific resistance increased according to detention time. In pilot test of dewatering for thickened sludge with Nylon Multi-NY840D and Nylon Mono-100% filter media, dewatering velocities were 0.92 and $0.93kg\;DS/m^2{\cdot}hr$ according to 0.1% polymer dose of dried solids weight base. And cyclic dewatering rates were 2.45 and $2.50kg\;DS/m^2{\cdot}cycle$ cycle for the Nylon Multi-NY840D and Nylon Mono-100% media. Dewatering velocity of polymer dosed sludge was observed to be higher than that of non-polymer sludge.

• The Korean Journal of Ecology
• /
• 제16권3호
• /
• pp.353-364
• /
• 1993

To elucidate ecophysiological factors affecting nutural distribution of evergreen broad-leabed trees in Danohad National Marine Park, water potential, relative water content and photosynthetic activities of 4 species, Cammellia japonica, Machilus thunbergii, Castanopsis cuspidata var.sieboldii and Quercus acuta, were potential began to decrease from 07:00h to its minimum value at 13:00h for C. cuspidata var. sieboldii (-14.3bar) and Q. acuta (-19.4bar) at 16:00 h for M. thunbergii(-17.0bar) and at 19:00 h for C. japonica (-14.5bar), and these showed similar trends to relative water content. Photosynthetic activities of 4 species began to increase from 7:00 h and reached maximum values before their minimum values of water potential occureed. Optimum temperature renges of photosynthetic activities was $18~20^{\circ}C$ for C. japonica - M. thunbergii and $14~16^{\circ}C$ for C. cuspidata var. sieboldii Quercus acuta.Q.acuta had the highest light saturation point of $0.4mM/m^2/s$ and C. japonica the lowest of $0.15mM/m^2/s$. Water potential of 4 species subjected to water stress, began to decrease after 1st day of drought and after 21th day of drought, those of C. japonica, M. thunbergii, C. cuspidata var. sieboldii and Q. acuta decreased to species began to decrease after 7th day of drought and after 21th day, those of M. thunbergii, C. cuspidata var. sieboldii and Q. acuta were dropped to about 50% and C. japonica 83.5%. Photosynthetic activity of 4 specie began to decline in the order of C. cuspidata var. sieboldii, Q.acuta, C. japonica and M. thunbergii after 10th day of drought. These results suggest that the segregated disributions of C. japonica - M. thunbergii on vally positions and C. cuspidata var. sieboldii - Q. acuta on slopes were associated with different responses of water status and photosyntheties to their environment.

• Journal of information and communication convergence engineering
• /
• 제4권1호
• /
• pp.46-52
• /
• 2006

Precipitation measurement with ground-based radar needs an information of the raindrop size distribution (RSD) characteristics. A 10-month dataset was collected in tropical Atlantic coastal zone of northeastern Brazil where the weather radar was installed. The number of drop was mainly recorded in 300 - 500 drop $mm^{-3}$, of which the maximum was registered around 1.1 mm drop diameter.

• 폴리머
• /
• 제34권4호
• /
• pp.386-389
• /
• 2010

Thermal behaviors of water in the poly(acrylic acid) (PAA)/water mixtures with 0.1 M NaCl, HCl, and NaOH were investigated by DSC. It showed that adding ions in the mixtures affected the crystallization of water evidently. Compared with the PAA/water mixtures, the $T_m$ of freezable bound water in the mixtures with ions moved to lower values and varied with different cations and anions, due to the stabilization or destabilization of the hydrogen-bonding hydration between polymers and water molecules through ionic hydration. The content of non-freezable bound water in the non-crystalline phase of the PAA/water mixtures with ions was not constant, it increased with total water content gradually, owing to the more binding sites created by ions. The ions could change the distribution of different states of water in the polymer aqueous solutions evidently.

• Geomechanics and Engineering
• /
• 제18권2호
• /
• pp.189-203
• /
• 2019

Brine leakage is a common phenomenon during construction facilitated by artificial freezing technique, threatening the stability of frozen wall due to the continual thawing of already frozen domain. This paper takes the frequently encountered soft clay in Wujiang District as the study object, and remolded specimens were prepared by mixing calcium chloride solutions at five levels of concentration. Both the deformation and pore water pressure of frozen specimens during thawing were investigated by two-stage loading tests. Three sections were noted from the changes in the strain rate of specimens during thawing at the first-stage load, i.e., instantaneous, attenuated, and quasi-stable sections. During the second-stage loading, the deformation of post-thawed soils is closely correlated with the dissipation of pore water pressure. Two characteristic indexes were obtained including thaw-settlement coefficient and critical water content. The critical water content increases positively with salt content. The higher water content of soil leads to a larger thaw-settlement coefficient, especially at higher salt contents, based on which an empirical equation was proposed and verified. The normalized pore water pressure during thawing was found to dissipate slower at higher salt contents, with a longer duration to stabilize. Three physical indexes were experimentally determined such as freezing point, heat conductivity and water permeability. The freezing point decreases at higher salt contents, especially as more water is involved, like the changes in heat conductivity. The water permeability maintains within the same order at the considered range of salt contents, like the development of the coefficient of consolidation. The variation of the pore volume distribution also accounts for this.

• 지질공학
• /
• 제32권2호
• /
• pp.241-255
• /
• 2022

본 연구에서는 예천지역의 화강풍화토에 대하여 KS F 2302의 체 분석 방법과 규정에 준하여 체분석 시험을 수행하고, 물 세척시 발생되는 흙의 입자분리와 입도분포 변화의 특성을 비교 분석하였다. 광학현미경에 의한 영상이미지 분석결과 흙입자가 물에 의해 더 작은 입자로 분리됨을 확인하였고 입도분포곡선의 변화를 5가지 지표값으로 산출한 결과 세립분(0.075 mm)의 증가량은 13.67%, 임의 입경(0.25 mm)의 증가량은 19.44%, 입도분포곡선의 최대통과율폭(B_M)은 #30 체에서 21.08%가 증가되었고 입도분포곡선의 이동면적(A)은 69.28%·mm로 분석되었으며 평균입경(D₅₀)은 0.663 mm가 감소되었다. 이러한 결과는 물 세척을 수행하는 것이 세립토의 함량이 실제보다 과소평가 되는 것을 막을 수 있는 효과적인 방법임을 의미한다.

• 청정기술
• /
• 제19권4호
• /
• pp.464-468
• /
• 2013

본 연구에서는 석탄 종류, 저등급석탄으로부터 첨가제의 종류, 입도분포 및 건조 방법에 따른 석탄-물 혼합연료(coal water fuel, CWF)의 고체함유량을 높이고자 하였다. 건조 방법에는 열풍 건조 방법(flash drying, FD), 유동층 건조 방법(fluidized bed, FB), 유중 건조 방법(oil deposit stabilized, ODS)을 사용하였다. 석탄 종류에 의해서 고체함유량 차이는 최대 20% 이상 보였다. 또한, CWF을 제조할 때 넣어주는 첨가제의 종류를 다르게 하여 실험한 결과 첨가제에 의해서 5%까지 효율을 더 높일 수 있었다. 석탄의 입도분포는 $75{\mu}m$ 이하의 미분탄이 80% 함유되어야 CWF의 성능이 향상되는 것을 관찰하였다. 3가지 건조 방법을 활용하여 CWF를 제조해본 결과, 안정화시킨 유중 건조 석탄이 원탄에 비하여 12% 정도 더 높은 고체함유량을 갖는 CWF를 제조할 수 있는 것을 알 수 있었다.

• Macromolecular Research
• /
• 제17권7호
• /
• pp.483-490
• /
• 2009

Stable poly(styrene-co-divinylbenzene) [P(St-co-DVB)] micro spheres with narrow size distribution were synthesized in the presence of 2,2'-azobis(2,4-dimethyl valeronitrile) (V-65) and co-initiator in an acetone/water mixture in the precipitation polymerization at $53^{\circ}C$ for 24 h. Potassium peroxodisulfate (KPS), ammonium peroxodisulfate (APS) and sodium peroxodisulfate (NaPS) were used as co-initiators. The optimum ratio of acetone to water for the formation of a narrow distribution of P(St-co-DVB) particles was 49:11 (g/g). The optimum co-initiator compositions for narrow distribution were 9:1 (g/g) for V-65 to KPS, 11:1 for V-65 to APS and 6:1 for V-65 to NaPS. The yield for these compositions was $54{\sim}57%$ and the largest particle size was obtained with the lowest zeta-potential and CV values. From the XPS measurements, the charge density was increased but the zeta potential decreased with increasing sulfur content, implying that the sulfate group provides the electrostatic stabilization on the particle surface. This suggested that the self-crosslinking between styrene and DVB, the electrostatic stabilization of initiators, and the balanced hydrophobic and hydrophilic properties of the solvents are responsible for the formation of stable P(St-co-DVB) spherical particles with narrow size distribution.

• 한국분무공학회지
• /
• 제5권1호
• /
• pp.5-12
• /
• 2000

The beneficial aspects of applying emulsion fuels to combustion systems may be due to the changes of fuel properties which lead to the enhanced atomization characteristics. The spray characteristics of water/oil emulsified fuel injected from the pressure-swirl(simplex) atomizer using for oil burner were investigated. Four different water contents from 10 to 40 % by volume at 10% increment were prepared by mixing with the different contents of surfactants. Total amount of surfactant used was varied from 1 to 3 % by volume. This study demonstrates the influence of water and surfactant contents of emulsified fuel, injection pressure on the spray characteristics, i.e. Sauter mean diameter(SMD) and spray angle. The drop size distribution of the emulsified fuel spray was measured with a Malvem particle sizer. In order to measure the spray angle, the digital image processing was employed by capturing multiple images of the spray with 3-CCD digital video camera. It was evident that the addition of water and surfactant changes fuel properties which are the key parameters influencing the atomization of the spray. The increase in surfactant content results in the decrease of SMD and the increase in spray angle. The droplets decease with increase in injection pressure, but the influence of injection pressure in this experimental condition was less important than expected. The more viscous fuel with the increase of water content exhibits the larger droplets in the centerline of the spray, and the less viscous fuel in the outer edges of the spray. The increase in axial position from the nozzle causes the spray angle to decrease. The spray angle decreases with increase in water content. This is due to increase in viscosity with increase in water content.