• 풍력에너지저널
• /
• 제14권1호
• /
• pp.37-43
• /
• 2023

In this study, synthetic time series wind data was generated numerically using a second-order Markov chain. One year of wind data in 2020 measured by the AWS on Wido Island was used to investigate the statistics for measured wind data. Both the transition probability matrix and the cumulative transition probability matrix for annual hourly mean wind speed were obtained through statistical analysis. Probability density distribution along the wind speed and autocorrelation according to time were compared with the first- and the second-order Markov chains with various lengths of time series wind data. Probability density distributions for measured wind data and synthetic wind data using the first- and the second-order Markov chains were also compared to each other. For the case of the second-order Markov chain, some improvement of the autocorrelation was verified. It turns out that the autocorrelation converges to zero according to increasing the wind speed when the data size is sufficiently large. The generation of artificial wind data is expected to be useful as input data for virtual digital twin wind turbines.

• Macromolecular Research
• /
• 제10권4호
• /
• pp.236-239
• /
• 2002

Centrifugation is a method to create functionally graded materials (FGM) with a thermosetting matrix. In this study the movement of short carbon fibers in an epoxy resin during the centrifugation process was modeled to determine the fiber distribution in the final product. For this purpose a form factor K was introduced to modify a set of equations that was previously shown to be valid for the motion of spheres. It was shown that the results of the simulation were in good agreement with the experimental data, when an empirical K factor of four was chosen.

• 한국광학회지
• /
• 제11권6호
• /
• pp.441-446
• /
• 2000

Balanced Homodyne Detection 방법으로 국소 진동자의 위상을 조절해 주면서, 각 위상에 대하여 광전류를 측정하여 전류세기의 분포함수를 구하여 이 값을 라돈 역변환을 포함한 Filtered Back Projection하여 빛의 양자역학적 상태를 규정하는 위그너 함수를 구하고 이로부터 간접적으로 밀도행렬을 구한다. 또 위상에 관계없이 구해진 분포함수에서 Pattern함수를 이용하여 밀도행렬을 구할 수 있다. 본 연구에서는 위의 모든 과정을 전산시늉을 통하여 여러 양자역학적 상태 입력 광에 대하여 예측되는 위그너 함수와 밀도 행렬을 구하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.660-665
• /
• 1993

An elastic model is developed to predict the average thermal residual stresses in the matrix and fiber of a misoriented short fiber composite. The thermal residual stresses are induced by the mismatch in the coefficient of the thermal expansion of the matrix and fiber when the composite is subjected to a uniform temperature change. The model considers two special cases of fiber misorientation ; two-dimensional in-plane and three-dimensional axisymmetric. The analytical formulation of the model is based on Eshelby's equivalent inclusion method and is nuque in that it is able to account for interactions among fibers. The model is more general than past models and it is able to treat prior analyses of the simpler composite systems as extram cases. The present model is to investigate the effects of fiber volume fraction, distribution type, distribution cut-off angle, and aspect ratio on thermal residual stress for both in-plane and axisymmetric fiber misorientation. Fiber volum fraction, aspect ratio, and disturbution cut-off angle are shown to have more significant effects on the magnitude of the thermal residual stress than fiber distrubution type for both in-plane and axisymmetric misorientation.

• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.122-130
• /
• 2000

Due to the inherent dimensional uncertainty, the tolerances accumulate in the assembly of plasma cutting torch. Tolerance accumulation has serious effect on the performance of the plasma torch. This study proposes a statistical tolerance propagation model, which is based on matrix transform. This model can predict the final tolerance distributions of the completed plasma torch assembly with the prescribed statistical tolerance distribution of each part to be assembled. Verification of the proposed model was performed by making use of Monte Carlo simulation. Monte Carlo simulation generates a large number of discrete plasma torch assembly instances and randomly selects a point within the tolerance region with the prescribed statistical distribution. Monte Carlo simulation results show good agreement with that of the proposed model. This results are promising in that we can predict the final tolerance distributions in advance before assembly process of plasma torch thus provide great benefit at the assembly design stage of plasma torch.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1428-1432
• /
• 2008

상수관망이 노후화됨에 따라 파괴나 누수와 같은 운영상의 문제가 빈번하게 발생한다. 따라서 상수관망의 상태를 보다 정확히 파악하여 운영할 경우 안정적인 상수관망의 운영이 가능할 것이며 관파괴와 같은 돌발적인 사태의 피해를 최소화 할 수 있을 것이다. 그러나 상수관망의 실시간 모니터링 센서중 대표적인 online 압력계를 모든 지점에 설치할 경우 과다한 초기투자 비용이 소요되며 시스템의 유지관리 측면에서도 적절하지 않다. 따라서 본 연구에서는 상수관망의 실시간 모니터링을 위한 적정한 규모의 online 압력계 설치위치의 결정 방법을 제안하였다. 제안된 방법은 영향행렬지수(Effect Index Matrix)를 기반으로 하며 영향행렬지수내 column search를 수행하여 online 압력계의 위치를 선정한다. 제안된 방법을 미국의 Cherry Hill 상수관망에 적용하여 적용성을 검증하였다.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.407-412
• /
• 1990

Elastic modulus of unidirectional short fiber composite has theoretically derived with the consideration of Poisson's ratios of matrix and fiber. Unidirectional short fiber composite is modeled as an aggregate of grains developed by Kerner. Under the assumption of extra strain at fiber ends, the strain distribution along the fiber's length is determined, and the elastic modulus is derived from this distribution. For the consideration of effects of Poisson's ratio, Kerner's results for particulate composites are adapted as boundary conditions. The effect of differences in Poisson's ratio of fiber and matrix on elastic modulus is studied. Proposed equation shows a good agreement with experimental data of Halpin and Tock, et al.

• Journal of the Korean Statistical Society
• /
• 제26권3호
• /
• pp.397-405
• /
• 1997

Recently maximum likelihood estimators using unconditional likelihood function are used for testing unit roots. When one wants to use this method the determinant term of initial values in the multivariate unconditional likelihood function produces a complicated function of the elements in the coefficient matrix and variance matrix. In this paper an approximation of the determinant term is calculated and based on this aproximation an approximated unconditional likelihood function is calculated. The approximated unconditional maximum likelihood estimators can be used to test for unit roots. When multivariate process has one unit root the limiting distribution obtained by this method and the limiting distribution using exact unconditional likelihood function are the same.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.113-118
• /
• 2003

An investigation has been carried out on collision-induced dissociation (CID) in the development of an analytical protocol for the determination of polycyclic aromatic hydrocarbons (PARs) by ion trap tandem mass spectrometry. Two different considerations were used to choose the optimal CID conditions for complex matrix environmental samples, namely, to determine the highest signal-to-noise (SIN) ratio and the other to eliminate the background interferences originated from complex matrix samples. The PAR content of agricultural soil was measured to estimate overall distribution of PAR in throughout the country, we collected and analyzed 226 soil samples from paddy and upland soil. The average content of total PAR in all samples was 236 ${\mu}g$ $kg^{-1}$, and the range was from 23.3 to 2, 834 ${\mu}g$ $kg^{-1}$. The overall distribution of PAR was found to be closely related to the pollution sources, the size of city and the type of industry.

• Computers and Concrete
• /
• 제12권4호
• /
• pp.431-442
• /
• 2013

This study attempted to find a proper method applicable to simulating practical equifield lines of two-dimensional Accelerate Lithium Migration Technique (ALMT), and evaluate the feasibility of using the theoretical ion migration model of one-dimensional ALMT to predict the ion migration behavior of two-dimensional ALMT. The result showed that the electrolyte or carbon plate can be used as matrix to draw equifield line graph similar to that by using mortar as matrix. Using electrolyte electrode module for simulation has advantages of simple production, easy measurement, rapidness, and economy. The electrolyte module can be used to simulate the equifield line distribution diagram in practical two-dimensional electrode configuration firstly. Then, several equifield line zones were marked, and several subzones under one-dimensional ALMT were separated from various equifield line zones. The theoretical free content distribution of alkali in concrete under two-dimensional electric field effect could be obtained from duration analysis.