• 한국수자원학회논문집
• /
• 제34권5호
• /
• pp.499-509
• /
• 2001

자연하천에서의 이송-확산 과정의 모의를 위하여 입자위치의 이산확률분포에 기초한 2차원 수송 모형을 개발하였다. 제안된 모형에서는 단위 시간간격동안 격자간의 질량이송을 예측하기 위하여 평균과 분산의 함수로 나타내어진 확률분포를 사용하였다. 개발된 모형은 유속, 확산계수, 단면적이 일정한 단순영역에 대하여 수치확산이 없는 해를 구하였고, 양의 확률을 만족시키는 안정조건이 성립한다면, 해석해와 다른 유한차분법과 비교하였을 때, 좋은 결과를 나타내었다. 본 모형의 현장적용성을 검토하기 위하여 캐나다에 위치한 Grand River를 대상을 얻은 수치실험 결과를 정상상태의 색소실험 결과와 비교하였다. 그 결과로서 본 모형은 자연하천에서의 2차원 이송-확산을 잘 모의할 수 있는 것으로 나타났다.

• 방사성폐기물학회지
• /
• 제4권3호
• /
• pp.235-243
• /
• 2006

본 연구에서는 현재 국내에서 고준위 방사성폐기물 처분장의 잠재적인 완충재 물질로 고려되고 있는 경주벤토나이트에서 발생 가능한 벤토나이트 콜로이드로의 우라늄(VI) 수착특성에 대한 실험적 연구를 pH 및 이온강도의 함수로 수행하였다. 경주벤토나이트로부터 분리된 콜로이드는 주로 몬모릴로나이트로 구성되어 있다. 중력여과법을 사용하여 측정한 결과 농도 및 크기는 약 5100 ppm 및 200-450 nm 이었다 우라늄 수착실험에 대한 공시험을 수행하여 수착 반응용기 벽면에 흡착, 침전, 한외여과에 의해 손실된 우라늄 양을 평가하였다. 이러한 과정에 의해 제거된 우라늄의 양은 미량이었다. 그러나 한외여과에 의한 우라늄 손실의 경우 이온강도가 낮은 경우 즉, 0.001 M $NaClO_4$의 경우 한외여과 필터의 표면전하 역전에 의한 양이온 수착 영향으로 인해 매우 높은 핵종 손실을 유발하였다. 벤토나이트 콜로이드에 대한 우라늄(VI)의 수착 분배계수 $K_d$ (또는 의사콜로이드 형성상수)는 PH 및 이온강도에 따라 $10^4{\sim}10^7 mL/g$ 값을 가지며 pH 중성영역인 6.5 근처에서 최대값을 가지는 것으로 나타났다. 벤토나이트에 대한 우라늄(VI)의 수착은 pH, 이온강도, 탄산농도 등과 같은 지화학적 변수들에 의존하는 수용액에서 우라늄화학종과 매우 밀접한 관련이 있다 따라서 벤토나이트 완충재로부터 발생된 벤토나이트 콜로이드는 높은 수착능으로 인해 우라늄(VI)을 의사콜로이드(pseudo-colloid)의 형태로 지질학적 매질을 통해 이동시킬 수 있을 것이다.

• Computers and Concrete
• /
• 제5권6호
• /
• pp.545-558
• /
• 2008

The corrosion of RC structures demonstrates very complicated forms of deterioration intermingled together but all pointing to a decrease in the durability of RC structures due to the corrosion of reinforcing bars. Until now, nondestructive techniques, such as half-cell potential and polarization resistance, have been widely available in the world. The former provides information on the probability of corrosion while the latter is associated with information concerning corrosion rates. Inversion by the boundary element method (IBEM) was developed for considering concrete resistivity. The applicability of the procedure was examined through a numerical analysis and electrolytic tests for RC slabs. A distribution in such concrete resistivity is relatively inhomogeneous including cracks on the surface of slabs. Regarding cracks in concrete, the relative coefficient of concrete resistance was introduced to perform its analysis. Further, the procedure will be developed to identify the corroded region visually using 3-D VRML.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.368-370
• /
• 2001

There are various shapes such as square, rectangular, L, and T type in the grounding systems of substations. IEEE St-d suggests the formula considering the characteristics of the various grounding systems but the final value can not be taken, and them the analysis of complicated computer program for obtaining the more accurate value is needed. In his paper, by using CDEGS(Current, Distribution, Electromagnetic and Soil Structure Analysis) the estimated functions derives form the modification coefficient for each of various types above mentioned. The mesh voltage expected can be obtained without the conventional expensive program using compensating methods that multiply IEEE formula by the estimated function.

• 대한환경공학회지
• /
• 제31권12호
• /
• pp.1161-1168
• /
• 2009

본 연구는 시화공단 단지에서 발생하는 주요 악취물질의 특성을 조사하였다. TVOC의 블록 별 분포를 보면 기계블록인 장소 D의 농도가 74 ppb로 가장 높았다. 화학블록인 장소 A가 그 다음으로 높은 50 ppb의 농도를 보였으며, 복합블록과 금속블록, 공원 등은 30 ppb 내외의 유사한 농도 수준을 보였고, 복합블록인 장소 F에서 평균 TVOC가 18 ppb로 가장 낮게 측정되었다. 평균 TVOC 농도는 35 ppb로 나타났다. 아세트알데히드, 뷰티르알데히드 등을 비롯한 알데히드류와 황화수소의 농도가 시화공단 지역의 악취물질 중에서 높게 나타났다. 대표적으로 악취 강도가 높은 물질인 아세트알데히드, 뷰티르알데히드, 황화수소를 중심으로 블록 별 악취강도를 비교해 본 결과 장소 A, B(화학블록)와 장소 D, I(기계블록), 장소 H(금속블록)에서 세 물질의 악취강도가 모두 1을 넘었다. 아세트알데히드의 경우 악취강도가 2 내외로 비교적 높게 나타나는 경우가 많았다. 황화수소의 경우 상관계수의 값이(r) 0.91로 악취강도와 황화수소 성분 사이에 매우 높은 양의 상관성이 있는 것으로 확인되었다. 뷰티르알데히드도 상관계수가 0.82로 역시 높은 양의 상관성을 보였다. 악취물질 농도로는 가장 큰 값을 보였던 아세트알데히드는 상관계수가 0.62로 악취강도와 어느 정도의 상관성이 있는 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제30권12호
• /
• pp.776-781
• /
• 2017

In this study, we investigated the effect of electrode pattern design on the thermal shock resistance and temperature uniformity of a ceramic heater. A cordierite substrate with a low thermal expansion coefficient was fabricated by tape casting, and a tungsten electrode was printed and used as a heating element. The temperature distribution of the ceramic heater was calculated by a finite-element method (FEM) by considering various electrode patterns, and the tensile stress distribution due to the thermal stress was calculated. In the electrode pattern with a single-line width, the central part of the ceramic heater was heated to the maximum temperature, and the position of the ceramic heater having a double-line width was changed to the maximum temperature, depending on the position of the minimum line width pattern. The highest tensile stress was found along the edges of the ceramic heater. The temperature gradient at the edge determined the tensile stress intensity. The smallest tensile stress was observed for electrode pattern D, which was expected to be advantageous in resisting thermal shock failures in ceramic heaters.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.215-226
• /
• 2020

The aim of this study is to investigate free vibration of functionally graded porous nanocomposite rectangular plates where the internal pores and graphene platelets (GPLs) are distributed in the matrix either uniformly or non-uniformly according to three different patterns. The elastic properties of the nanocomposite are obtained by employing Halpin-Tsai micromechanics model. The GPL-reinforced plate is modeled using a semi-analytic approach composed of generalized differential quadrature method (GDQM) and series solution adopted to solve the equations of motion. The proposed rectangular plates have two opposite edges simply supported, while all possible combinations of free, simply supported and clamped boundary conditions are applied to the other two edges. The 2-D differential quadrature method as an efficient and accurate numerical tool is used to discretize the governing equations and to implement the boundary conditions. The convergence of the method is demonstrated and to validate the results, comparisons are made between the present results and those reported by well-known references for special cases treated before, have confirmed accuracy and efficiency of the present approach. New results reveal the importance of porosity coefficient, porosity distribution, graphene platelets (GPLs) distribution, geometrical and boundary conditions on vibration behavior of porous nanocomposite plates. It is observed that the maximum vibration frequency obtained in the case of symmetric porosity and GPL distribution, while the minimum vibration frequency is obtained using uniform porosity distribution.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3800-3804
• /
• 2013

In this study, molecular dynamics simulations of SPC/E (extended simple point charge) model have been carried out in the canonical NVT ensemble over the range of temperatures 300 to 550 K with and without Ewald summation. The quaternion method was used for the rotational motion of the rigid water molecule. Radial distribution functions $g_{OO}(r)$, $g_{OH}(r)$, and $g_{HH}(r)$ and self-diffusion coefficients D for SPC/E water were determined at 300-550 K and compared to experimental data. The temperature dependence on the structural and diffusion properties of SPC/E water was discussed.

• Journal of electromagnetic engineering and science
• /
• 제16권2호
• /
• pp.119-125
• /
• 2016

In this paper, a method for identifying the appropriate position on the ground plane for antennas is proposed based on the current correlation coefficient ($C^3$). This method explains that the mutual coupling between antennas when locating several antennas on the same ground plane is necessary. Given the current distribution on the ground plane induced by each antenna, easily estimating the coupling between antennas is possible. This paper also demonstrates that the proposed method can be used in the design of a multi-input multi-output system. The measured data are in good agreement with the simulation results.

• Archives of Pharmacal Research
• /
• 제26권7호
• /
• pp.564-568
• /
• 2003

Pharmacokinetic and pharmacodynamic properties of gliclazide were studied after an oral administration of gliclazide tablets in healthy volunteers. After an overnight fasting, gliclazide tablet was orally administered to 11 volunteers; Additional 10 volunteers were used as a control group (i.e., no gliclazide administration). Blood samples were collected, and the concentration determined for gliclazide and glucose up to 24 after the administration. Standard pharmacokinetic analysis was carried out for gliclazide. Pharmacodynamic activity of the drug was expressed by increase of glucose concentration ($\Delta$PG), by area under the increase of glucose concentration-time curve ($AUC_{$\Delta$PG}$) or by the difference in increase of glucose concentration ($D_{$\Delta$PG}$) at each time between groups with and without gliclazide administration. Pharmacokinetic analysis revealed that $C_{max}, T_{max}$, CL/F (apparent clearance), V/F (apparent volume of distribution) and half-life of gliclazide were $4.69\pm1.38 mg/L, 3.45\pm1.11 h, 1.26\pm0.35 L/h, 17.78\pm5.27 L, and 9.99\pm2.15 h$, respectively. When compared with the no drug administration group, gliclazide decreased significantly the $AUC_{$\Delta$PG}$ s at 1, 1.5, 2, 2.5, 3 and 4 h (p＜0.05). The $\Delta$PGs were positively correlated with $AUC_{gliclazide}$ at 1 and 1.5 h (p＜0.05), and the correlation coefficient was maximum at 1 h (r = 0.642) and gradually decreased at 4 h after the administration. The $AUC_{$\Delta$PG}$s were positively correlated with $AUC_{gliclazide}$ at 1, 2, 3 and 4 h (p＜0.05), and the maximum correlation coefficient was obtained at 2 h (r=0.642) after the administration. The $D_{$\Delta$PG}$ reached the maximum at 1 h, remained constant from 1 h to 3 h, and decreased afterwards. Therefore, these observations indicated that maximum hypoglycemic effect of gliclazide was reached at approximately at 1.5 h after the administration and the effect decreased, probably because of the homeostasis mechanism, in health volunteers.