• Korean Journal of Ecology and Environment
• /
• v.49 no.2
• /
• pp.142-146
• /
• 2016

The purpose of this study is to evaluate topographic characteristics revealed in the predicted distribution areas of Aporia crataegi, according to climate change. Towards this end, this study compared the differences of topographic factors, such as altitude, mountain slope and the aspect of slope, in the distribution areas with different potential inhabitation possibilities of the Aporia crataegi. The inhabitation possibilities of the Aporia crataegi were different, according to altitude and topographic slope, and the inhabitation possibility is judged to be affected more by the topographic conditions including altitude and mountain slope than by the aspect of slope. Especially, the inhabitation possibility of the Aporia crataegi was higher in the higher altitude area, as time goes on furthermore. The reason is that the current climate environment, which is suitable for the potential inhabitation of the Aporia crataegi, is forecast to be formed with an area with high altitude. Although the difference in the aspect of slope was not statistically significant according to inhabitation possibility, the reason why the inhabitation possibility of the Aporia crataegi varies in the mainly southeast slope is conjectured to be derived from the warmer heat environmental condition to grow from a larva into an imago. The result drawn in this study is expected to be utilized as basic data to establish a policy soundly preserving and managing the habitat of biospecies in consideration of climate change and topographic conditions in the natural ecosystem field by using the already built up various biological resources information.

• Transactions of Materials Processing
• /
• v.15 no.6 s.87
• /
• pp.421-427
• /
• 2006

Drawing process of Al-1%Si bonding wire considering fine Si particle is analyzed in this study using FE-simulation. Al-1%Si boding wire requires electric conductivity because Al-1%Si bonding wire is used for interconnection in semiconductor device. About 1% of Si is added to Al wire for dispersion-strengthening. Distribution and shape of fine Si particle have strongly influence on the wire drawing process. In this study, therefore, the finite-element model based on the observation of wire by continuous casting is used to analyze the effect of various parameters, such as the reduction in area, the semi-die angle, the aspect ratio, the inter-particle spacing and orientation angle of the fine Si particle on wire drawing processes. The effect of each parameter on the wire drawing process is investigated from the aspect of ductility and defects of wire. From the results of the analysis, it is possible to obtain the important basic data which can be guaranteed in the fracture prevention of Al-1 %Si wire.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.7
• /
• pp.31-38
• /
• 2016

In this paper, we propose a direction for improving 'Geospatial information open platform' service to support the converged and integrated geospatial information. Since there can be a number of issues relating to the support for geospatial information convergence industry, two qualitative surveys were performed to collect opinions comprehensively and specifically. The responses from 165 experts from 5 areas that use geospatial information were used, and the requirements of demanders were divided into the aspect of policy, aspect of data development and distribution, and aspect of data utilization support in order to effectively analyze the survey results. As a result, a total of 26 major issues were derived and it was deemed that it is necessary to find a way to expand the role of 'Geospatial information open platform' from "Open-API Oriented Passive Spatial Information Open Platform" to "Platform that Comprehensively Provides Active Convergence Support Information" order to resolve the issues derived.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.274-284
• /
• 2002

Deep drawing process for rectangular drawn section is different with that for axisymmetric circular one. Therefore deep drawing process for rectangular drawn section requires several intermediate steps to generate the final configuration without any significant defect. In this study, finite element analysis for multi-stage deep drawing process for high precision rectangular cases is carried out especially for an extreme aspect ratio. The analysis is performed using rigid-plastic finite element method with an explicit time integration scheme of the commercial program, LS-DYNA3D. The sheet blank is modeled using eight-node continuum brick elements. The results of analysis show that the irregular contact condition between blank and die affects the occurrence of failure, and the difference of aspect ratio in the drawn section leads to non-uniform metal flow, which may cause failure. A series of experiments for multi-stage deep drawing process for the rectangular cases are conducted, and the deformation configuration and the thickness distribution of the drawn rectangular cases are investigated by comparing with the results of the numerical analysis. The numerical analysis with an explicit time integration scheme shows good agreement with the experimental observation.

• Steel and Composite Structures
• /
• v.42 no.3
• /
• pp.375-388
• /
• 2022

In this work, limit elastic speed analysis of functionally graded porous rotating disks has been reported. The work proposes an effective approach for modeling the mechanical properties of a porous functionally graded rotating disk. Four different types of porosity models namely: uniform, symmetric, inner maximum, and outer maximum distribution are considered. The approach used is the variational principle, and the solution has been achieved using Galerkin's error minimization theory. The study aims to investigate the effect of grading indices, aspect ratio, porosity volume fraction, and porosity types on limit angular speed for uniform and variable disk geometries of constant mass. To validate the current study, finite element analysis has been used, and there is good agreement between the two methods. The study yielded a decrease in limit speed as grading indices and aspect ratio increase. The porosity volume fraction is found to be more significant than the aspect ratio effect. The research demonstrates a range of operable speeds for porous and non-porous disk profiles that can be used in industries as design data. The results show a significant increase in limit speed for an exponential disk when compared to other disk profiles, and thus, the study demonstrates a range of FG-based structures for applications in industries that will not only save material (lightweight structures) but also improve overall performance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.89-95
• /
• 2015

As a solution of improving the energy efficiency in power system, Low Voltage DC (LVDC) distribution systems different from conventional ones have been constantly researched. As in conventional AC distribution system, LVDC distribution system can suffer from High Impedance Fault (HIF) which may cause a failure of protective relay due to relatively low change in magnitude of fault current. In order to solve the problem, a scheme for detecting HIFs is presented in this paper. Closing Opening Difference Operation (CODO) based on Mathematical Morphology (MM), one of the MM-based filters, is utilized to make fault signals discriminable. To verify performance of the scheme, a simple LVDC distribution system is modeled by using ElectroMagnetic Transient Program (EMTP) software. Computer simulations according to various conditions are performed and comparison studies with a scheme using Wavelet Transform (WT) in an aspect of simulation time are also conducted.

• Journal of Distribution Science
• /
• v.22 no.7
• /
• pp.23-32
• /
• 2024

Purpose: Increasingly limited environmental resources encourage all sectors to implement robust distribution systems, including Logistics Service Provider (LSP) as a company that manages customer logistics activities. However, efforts to achieve a robust distribution system have many challenges. To overcome these challenges, as a first step, LSP needsto classify and analyze the challenges faced and find solutions. Knowledge of the challengesin managing robust logisticsisstill not widely researched in developing countries. This paper explores existing research gaps in the region. Research design, data and methodology: The research enquiries used are a questionnaire and in-depth interviews. In the field study, surveys, observations, interviews related to robust logistics implementation in the LSP were carried out. Results: The results of the study show that although robust logistics is recognized as very important, understanding among LSPs is still very diverse. The main challengesfound in this study come from the economic aspect and the internal conditions of the organization. Conclusion: LSP is advised to carry out internal strengthening of the company, especially for economic and organizational aspects therefore they can implement robust and sustainability practices more intensively. LSP needs to have good financial support in order to implement the aspects on an ongoing basis.

• Journal of the Korean Ceramic Society
• /
• v.43 no.7 s.290
• /
• pp.415-420
• /
• 2006

The residual stresses in the interface region of the Thermal Barrier Coating (TBC)/Thermally Grown Oxide (TGO)/Bond Coat (BC) were calculated on the TBC-coated superalloy samples using a Finite Element Method (FEM). It was found that the stress distribution of the interface boundary was dependent upon mainly the geometrical shape or its aspect ratio and the thickness of TGO layer, which was formed by growth and swelling behavior of oxide layer. Maximum compressive residual stress in the TBC/TGO interface is higher than that of the TGO/bond coat interface, and the tensile stress had nothing to do with change of an aspect ratio. The compressive residual stresses in the TBC/TGO and TGO/bond coat interface region increased gradually with the TGO growth.

• Korean Journal of English Language and Linguistics
• /
• v.2 no.3
• /
• pp.329-372
• /
• 2002

Tobin (1993) argues that verbs can be classified according to the process/result distinction. He further claims that the grammatical development of the lexical verbs into auxiliary/aspectual verbs is motivated by the distinction. In this paper, first, I reconsider Tobin's (1993) claim in the viewpoint of the principle of persistence (Hopper 1991) or the source determination hypothesis (Bybee, Perkins, and Pagliuca 1994), which states that the meaning of the source construction determines the path of grammaticalization. I then classified tense/aspect/ modality markers according to Tobin's (1993) process/result distinction. Finally, I argue that Tobin's (1993) process/result distinction constrains the distribution of grammaticalized verbs among tense/aspect/modality markers not only in English and but also in Korean.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.659-663
• /
• 1995

The fiber oriented conditied inside fiber reinforced composite material is a basic factor of mechanical properties of composite materials. It is very important to measure the fiber orientation angel for the determination of molding conditions, mechanical charactistics, and the design of composite materials. In the work, the fiber orientation distribution of simulation figure plotted by PC is measured using image processing in order to examine thr accuracy of intersection counting method. The fiber orientation function measured by intersection countingmethod using image processing is compared with the calculated fiber orientation function. The results show that the measured value of fiber orientation function using intersection counting method is lower than the calculated value, because the number of intersection between the secant line and the fiber with smaller fiber aspect ratio is counted less than with larger fiber aspect ratio.