• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.187-189
• /
• 2005

The asset management system for power distribution is necessary to make efficient use of distribution asset and to devise optimum investment plans. So we developed KDAMS(Korea Distribution Asset Management System) that is adopting reliability indexs, SAIFI and SAIDI, and operator's experiences. This paper presents functions of the system that is reliability management, failure rate management, establishment of optimum investment plan and so on. And it presents the of used algorithms to develop this system.

• Smart Structures and Systems
• /
• 제12권6호
• /
• pp.641-659
• /
• 2013

In this paper is studied the influence of the uncertain mass distribution over the floors on the choice of the optimal parameters of a hybrid control system for tall buildings subjected to wind load. In particular, an optimization procedure is developed for the robust design of a hybrid control system that is based on an enhanced Monte Carlo simulation technique and the genetic algorithm. The large computational effort inherent in the use of a MC-based procedure is reduced by the employment of the Latin Hypercube Sampling. With reference to a tall building modeled as a multi degrees of freedom system, several numerical analyses are carried out varying the parameters influencing the floors' masses, like the coefficient of variation of the distribution and the correlation between the floors' masses. The procedure allows to obtain optimal designs of the control system that are robust with respect to the uncertainties on the distribution of the dead and live loads.

• 한국도서관정보학회지
• /
• 제33권2호
• /
• pp.303-321
• /
• 2002

정부의 범위와 역할이 확대되고 그 활동내용이 다양해지면서 정부차원에서 생산되는 정보량도 지속적으로 증가하게 되었을 뿐만 아니라 정부가 생산한 정보는 국민이 국가정책을 이해하는데 중요한 정보원이 되고 있다. 이에 본 연구에서는 우리나라 정부간행물의 발간정책과 최근 발간경향을 살펴보았으며 정부가 생산한 정도의 합리적 배포체계를 위해 법적 제도적 기술적 측면에서 분석하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권10호
• /
• pp.550-555
• /
• 2004

Fault section isolation and service restoration are very important for function of DAS. In Japan, a progressive protection method is used for the line to ground fault section isolation and service restoration. But the progressive protection method has a drawback that the customer will experience outage time and that the rate in use of the feeder is not over 50%. This paper presents a new Service Restoration Algorithm which is for the line to ground fault section isolation and service restoration method for a ungrounded distribution system. If the proposed algorithm is used, the rate in use of the feeder can improve than before because a distribution system can change multi connection of feeder and the customer's outage time can be reduced. The proposed algorithm has been successfully tested in a distribution system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.73-75
• /
• 2000

The new distribution automation system was developed in KEPCO just recently. This system has many functions for remote control and data acquisition but it has not all functions for the full automated distribution system. This paper presents the contents of many kinds of additional application programs on the stage of developing and coming to the final completion for the large scaled distribution automation system.

• Transactions on Electrical and Electronic Materials
• /
• 제18권5호
• /
• pp.303-309
• /
• 2017

The flexible AC transmission system (FACTS) provides a new advanced technology solution to improve the flexibility, controllability, and stability of a power system. The unified power flow controller (UPFC) is outstanding for regulating power flow in the FACTS; it can control the real power, reactive power, and node voltage of distribution networks. This paper investigates the performance of the UPFC for power flow control with a series of step changes in rapid succession in a power system steady state and the response of the UPFC to distribution network faults and islanding mode. Simulation was carried out using the MATLAB's simulink sim power systems toolbox. The results, which were carried out on a 5-bus test system and a 4-bus multi-machine electric power system, show clearly the effectiveness and viability of UPFC in rapid response and independent control of the real and reactive power flows and oscillation damping [6].

• Journal of Mechanical Science and Technology
• /
• 제15권1호
• /
• pp.66-80
• /
• 2001

In brake systems, a proportioning valve(P. V), which reduces the brake line pressure on each wheel cylinder for the anti-locking of rear wheels, is closely related to the safety of vehicles. However, it is impossible for current P. V. s to completely control brake line pressure because, mechanically, it is an open loop control system. In this paper we describe an electronic brake force distribution system using a direct adaptive fuzzy controller in order to completely control brake line pressure using a closed loop control system. The objective of the electronic brake force distribution system is to change the cut-in-pressure and the valve slop of the P. V in order to obtain better performance of the brake system than with mechanical systems.

• 한국국방경영분석학회지
• /
• 제22권2호
• /
• pp.182-199
• /
• 1996

Many vehicle routing methods have been suggested, which minimize the routing distances of vehicles to reduce the total transportation cost. But the more considerations the method takes, the higher complexites are involved in a large number of practical situations. The purpose of this paper is to develop a vehicle distribution planning system using heuristic algorithms and simulation techniques for home electronics companies. The vehicle distribution planning system developed by this study involve so complicated and stochastic conditions such as one depot, multiple nodes(demand points), multiple vehicle types, multiple order items, and other many restrictions for operating vehicles. The proposed system is compared with the nearest neighbor method and the savings method in terms of total logistics cost and driving time. This heuristic algorithm and simulation based distribution planning system is efficient in computational complexity, and give improved solutions with respect to the cost as well as the time. This method constructs a route with a minimum number of vehicles for a given demand.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.352-354
• /
• 2002

The sag is phenomenon that magnitude of load voltage temporarily decreases because of power system fault. If a certain equipment in industrial process have any trouble result from sag. it can cause utility to be charged for enormous economics loss. Therefore it need to analyze the characteristic of sag and then mitigation method for sags in distribution system in odor to increase reliability. This paper gives an overview of sags characteristic due to short circuit fault in distribution system and after a general discussion of the various forms mitigation, gives a sags mitigation method with concentrating on changing the distribution system like spot network, on-site generation.

• 대한의용생체공학회:의공학회지
• /
• 제21권2호
• /
• pp.213-218
• /
• 2000

Pressure distributions of the soft tissue are valuable for understanding and diagnosing the disease characteristics due to the mechanical loading. Our system measures dynamic pressure distributions in real-time under the general PC environment, and analyzes various foot disorders. Main features of the developed system are as follows: (1) With the resistive pressure sensor matrix of 40${\times}$40 cells, the data is sent to the PC with the maximum sampling rate of 40 frames/sec. (2) For each frame, contact area, pressure and force are analyzed by graphic forms. Thus, various biomechanical parameters are easily determined at specific areas of interests. (3) A certain stance phase can be chosen for the analysis from the continuous walking, and the detailed biomechanical analysis can be done according to an arbitrary line dividing anterior/posterior or medial/lateral plantar areas. (4) The center of pressure (COP) is calculated and traced from the pressure distribution data, and thus the movement of the COP is monitored in detail. A few experiments revealed that our system successfully measured the dynamic plantar distribution during normal walking.