• 터널과지하공간
• /
• 제17권3호
• /
• pp.197-202
• /
• 2007

본 연구에서는 표본의 원분포 특성을 고려하여 통계처리한 경우의 설계정수와 그렇지 않은 경우를 비교하였다. 통계처리를 한 경우는 통계처리 후에도 비슷한 양상을 나타냈으며 평균값의 경우 최대 약 19%의 편차가 발생하였다. 표본의 분포 특성을 무조건 정규 분포화 하는 것은 모집단의 특성을 왜곡하게 되므로 설계정수 산정시 표본의 분포 특성을 고려하여 통계처리를 하는 것이 타당할 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.115-117
• /
• 2002

In general, it is supposed that load characteristics of high and low voltage distribution line are always coincidence. But in practical distribution system, voltage variation characteristics of high and low voltage distribution line are not same. Then in this paper, we proposes a voltage regulation method considering load variation characteristics of high and low voltage distribution line in distribution system.

• Journal of Welding and Joining
• /
• 제21권3호
• /
• pp.30-34
• /
• 2003

This paper describes the heat distribution characteristics of ASTM A131DH36 high tensile steel for ship structures in 5㎾ $CO_2$ laser welding. In general, high energy of laser beam concentrates on the small area of the weldment instantaneously; therefore, this heat transfer mechanism induces the rapid changes of temperature and mechanical characteristics in laser welds this mechanism. So temperature distribution analysis is important to understand mechanical characteristics of laser welds. Authors have conducted finite element simulation to analyze the heat distribution characteristics in laser welds. The result of simulation has been verified by comparing with the metallurgical experiment result. From the result of this study, we can accurately predict the heat distribution characteristics in laser welds by using numerical simulation.

• 한국분무공학회지
• /
• 제6권2호
• /
• pp.16-21
• /
• 2001

This paper describes the macroscopic behavior and atomization characteristics of the high-pressure gasoline swirl injector in direct-injection gasoline engine. The global spray behavior of fuel injector was visualized by shadowgraph technique. The atomization characteristics of gasoline spray such as mean diameter and mean velocity of droplets were measured by the phase Doppler particle analyzer system. The macroscopic visualization and experiment of particle measurement on the fuel spray were investigated at 7 and 10 MPa of injection pressure under different spray cone angle. The results of this work show that the geometry of injector was more dominant over the macroscopic characteristics of spray than the fuel injection pressure and injection duration. As for the atomization characteristics, the increase of injection pressure resulted in the decrease of fuel droplet diameter and the atomization characteristics differed as to the spray cone angle. The most droplets had under $25{\mu}m$ diameter and for the large droplets(upper $40{\mu}m$) as the spray grew the atomization presses were very slow. Comparison results between the measured droplet distribution and the droplet distribution functions revealed that the measured droplet distribution is very closed to the Normal distribution function and Nukiyama-Tanasawa's function.

• Geomechanics and Engineering
• /
• 제12권2호
• /
• pp.185-195
• /
• 2017

With the rapid development of urban underground traffic, the study of soil deformation induced by subway tunnel construction and its settlement prediction are gradually of general concern in engineering circles. The law of soil displacement caused by shield tunnel construction of adjacent buildings is analyzed in this paper. The author holds that ground surface settlement based on the Gauss curve or Peck formula induced by tunnel excavation of adjacent buildings is not reasonable. Integrating existing research accomplishments, the paper proposed that surface settlement presents cork distribution curve characters, skewed distribution curve characteristics and normal distribution curve characteristics when the tunnel is respectively under buildings, within the scope of the disturbance and outside the scope of the disturbance. Calculation formulas and parameters on cork distribution curve and skewed distribution curve were put forward. The numerical simulation, experimental comparison and model test analysis show that it is reasonable for surface settlement to present cork distribution curve characters, skewed distribution curve characteristics and normal distribution curve characteristics within a certain range. The research findings can be used to make effective prediction of ground surface settlement caused by tunnel construction of adjacent buildings, and to provide theoretical guidance for the design and shield tunnelling.

• 상하수도학회지
• /
• 제8권2호
• /
• pp.35-42
• /
• 1994

This study is to analyse probability distribution characteristics of water supply demand. Two cities located near Seoul were selected as study areas. In this study, two probalility distribution types were tested using the K-S(Kolmogorov-Smirnov) method. The K-S method was used to prove the goodness of the selected distribution type. And also, the goodness of maximum day demand to average day demand ratio which was obtained by field data was tested. Conclusions are as follows. 1.Bothl normal distribution type and lognormal distribution type are appropriate as the probalility distribution type for the water supply demand. 2. The probability distribution characteristics can be used to test the goodness of the maximum day to average day demand ratio.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.119-123
• /
• 2000

The characteristics of fatigue life distribution for Carbon/epoxy composite laminates was investigated under tension-tension loading(R=0.1). The statistical nature of the fatigue life of the composite materials was analyzed by Weibull, normal, lognormal distributions As a result, it was observed that the correlation between the experimental results and the theoretical predictions for the fatigue life is good. The distribution of the static ultimate strength has the characteristic of lognormal distribution and distribution of the fatigue life has characteristics of the weibull distribution.

• 한국식품조리과학회지
• /
• 제22권2호
• /
• pp.250-257
• /
• 2006

Foodservice industry and distribution business could make mutual prpgress when they join forces in responding to environmental uncertainty in an efficient manner. The purpose of this study was to examine the relational characteristics of domestic food service businesses and distribution firms in conjunction with the distribution channels and ensuing conflicts between them, to present possible alternatives on and how they should communicate with each other to achieve a satisfactory result. The relational characteristics and ensuing conflicts of food service businesses and distribution firms appeared to be significantly characterized by incongruities of target, role and perception. The types of relational characteristics that were triggered by the disagreement of roles and perception combined to decrease the intensity of the relational commitment. A satisfactory transactional relationship served to ease their conflicts caused by perceptual disagreement, and the soos of conflicts that were rooted in the discord of roles and of perception that increased the degree of relational commitment. As for relational performance, relational commitment, satisfaction with distribution channel and satisfaction with suppliers allowed them to maintain their relationship on a long-term basis.

• 대한전자공학회논문지SD
• /
• 제39권4호
• /
• pp.1-9
• /
• 2002

DRAM에서 셀 파라메터들의 확률 분포를 고려하여 데이터 보유 시간에 대한 분포 특성을 계산하였다. 셀 파라메터와 셀 내부 전압의 과도 특성으로부터 데이터 보유 시간의 식을 유도하였다. 접합 공핍 영역에서 발생하는 누설 전류의 분포 특성은 재결합 트랩의 에너지 분포로, 셀 캐패시턴스 분포 특성은 유전체 성장에서 표면 반응 에너지의 분포 특성으로, 그리고 sense amplifer의 감도를 각각의 독립적인 확률 변수로 보고, monte carlo 시뮬레이션을 이용하여, 셀 파라메터 값들의 확률적 분포와, DRAM 셀들의 데이터 보유 시간에 대하여cumulative failure bit의 분포함수를 계산하였다 특히 sense amplifier의 감도 특성이 데이터 보유 시간 분포의 tail bit에 상당히 영향을 미침을 보였다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
• /
• pp.1661-1662
• /
• 2006

Internet communication network quality characteristics are analyzed using Beta probability distribution. Beta probability distribution is chosen for the underlying probability distribution because it is an extremely flexible probability distribution used to model bounded random variables. Based on the fitted Beta probability distribution, a dataset regarding each network quality characteristic is summarized concisely.