• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.52.4-52
• /
• 2001

In this paper we propose a framework of an open architectured manufacturing system base on CORBA middleware. The manufacturing system consists of four configurable software modules 9mchine control module, database module, monitoring module, and operation module). Each module is distributed through the network and integrated with CORBA middleware technology. CORBA Characteristics including independence from programming languages, computing platforms and networking protocols makes us to easily develop new applications and to effectively integrate new module into existing distributed systems. The CORBA program used in this study is The ACE ORB (TAO) developed by the laboratory in Washington University.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.70.6-70
• /
• 2001

There are many economic and operational reasons to integrate fire alarm signaling system with other building automation system. Integration of this requires communication standard and careful design practices. The important point for this is also the development of intelligent control modules for replacing the conventional zone adapter in fire system. Therefore, this paper proposes an new conceptual design of the distributed fire alarm signaling system and a new intelligent control modules with LonTalk Protocol. Newly proposed additions to Lonworks network make it very well suited for integration fire systems with other building automation systems. Additionally, it is very important that best design practices ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.22.5-22
• /
• 2001

Robust control of a GFR composite beam with a distributed PVDF sensor and piezo-ceramic actuator is presented En this paper. Modal analysis method and modal coordinates are introduced to obtain the state educations of the structural system. 1st and 2nd natural frequencies are considered In the modeling, because robust control theory which is robustness to structured uncertainty is adopted to suppress the vibration. If the controllers designed by H$\^$$\infty$/ theory do not satisfy control performance, it is improved by ${\mu}$-synthesis method with D-K Iteration so that the ${\mu}$-controller based on the structured singular value satisfies the nominal performance and robust performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.60.1-60
• /
• 2001

In recent years, distributed control systems(DCS) using fieldbus such as CAN have been being applied to process systems but it is very difficult to design the DCS in order to guarantee the given end-to-end constraints such as precedence constraints, time constraints, and periods and priorities of tasks and messages. This paper presents a scheduling method to guarantee the given end-to-end constraints. The presented scheduling method is the integrated one considering both tasks executed in each node and messages transmitted via the network and is designed to be applied to a general DCS that has multiple loops with several types of constraints, where each loop consists of ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.61.4-61
• /
• 2001

This research is the development of a distributed flexible tactile sensor for service robots using PVDF (polyvinylidene fluoride) film for the detection of the contact state in real time. The tactile sensor which has 8$\times$8 taxels is fabricated using PVDF film and flexible circuitry. The proposed fabrication method is simple and easy to make the sensor in the laboratory without using any special equipment. Experimental results on static and dynamic properties are obtained. In order to investigate the properties of the sensor, the sensor output to the arbitrary forces and frequencies are measured using the shaker with the force sensor.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.8-10
• /
• 1997

In recent years, the metal industry has become increasingly aware of an unwanted component in metal scrap-radioactive material. Worldwide, there have 38 instances where radioactive sources were unintentionally smelted in the course of recycling metal scrap. In some cases contaminated metal consumer products were distributed internationally. U.S. mill that have smelted a radioactive source face costs resulting from decontamination, waste disposal, and lost profits that range from 7 to 23 million U.S. dollars for each case. Despite radiation monitoring system does not provide 100% protection, POSCO has developed the system for the first time in the steel industry of KOREA.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1750-1753
• /
• 1997

This paper describes how the directivity pattern of the back-scattered sound pressure is distributed when a plane acoustic wave is incident on a righid spherical shell underwater. A coupled Finite Element-Boundary Element mehtod is developed as numerical technique. The result of the coupled FE-BE method is agreed with theoretical solution for algorithmic confirmation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.959-964
• /
• 1993

We developed fault diagnosis fuzzy expert system for ACS(Advanced Control System). ACS is a DCS(Distributed Control System) with advanced control algorithm fault tolerance capabilities, fault diagnosis functions, and so on. Fuzzy expert system developed for an ACS in this paper gives an operator alarm signal depending on the state of process value and manipulated value, and the cause of alarm in real time. Simple experiment result with several rules for the-fault-diagnosis of drum level loop in Seoul-Power-Plant.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.965-969
• /
• 1993

In this paper, the GPC algorithm is developed for ACS(advanced control system). ACS equals to DCS(distributed control system) with some advanced control algorithm, for example, fuzzy logic controller, autotuning. By its embedded structural control language, which uses simple function codes corresponding to each function blocks, it is possible to construct multiloop controller. The developed GPC function code is divided by RLS (recursive least square) parameter estimator and GPC controller. Simulation result show the availability of GPC function code using the control language.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1006-1011
• /
• 1993

In this study, a DNC(Distributed Numerical Control) management system is designed that can directly control and manage hybrid CNC machine tools on real-time. And management software is developed to inter-communicate field informations with CNC controllers using an interface processor(Intelligent Multi Communication Board, IMCB). Especially, IMCB supports that DNC system sends and receives part program with CNC controllers in the form of real-time multi-tasking.