• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.207-212
• /
• 1996

We propose an extended additional layer method (EALM) of calculating the coupling coefficient of arbitrary shaped diffraction gratings. In EALM, to determine the unperturbed field distribtution, a grating region is replaced by a new uniform layer whose dielectric constant is the average value of the dielectric constant of a grating region in both longitudinal and transverse directions. Using this method, we calculate the coupling coefficient for a five-layer distributed feedback structure device with trapezoidal and triangular gratings. The validity of this method is established by comparing the results calculated by partitioning the grating region up to five uniform layers.

• Journal of Mechanical Science and Technology
• /
• v.16 no.12
• /
• pp.1561-1575
• /
• 2002

A reduced-order linear feedback controller, which is used to control the linear disturbance in two-dimensional plane Poiseuille flow, is applied to a boundary layer flow for stability control. Using model reduction and linear-quadratic-Gaussian/loop-transfer-recovery control synthesis, a distributed controller is designed from the linearized two-dimensional Navier-Stokes equations. This reduced-order controller, requiring only the wall-shear information, is shown to effectively suppress the linear disturbance in boundary layer flow under the uncertainty of Reynolds number. The controller also suppresses the nonlinear disturbance in the boundary layer flow, which would lead to unstable flow regime without control. The flow is relaminarized in the long run. Other effects of the controller on the flow are also discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.96-99
• /
• 2005

As the demand of internet networks using backbone communication systems recently increased, the researches on the high-speed wideband optical communication systems are required. For high-speed optical communication systems, asymmetric sampled grating distributed feedback laser diodes (DFB-LDs) are developed and the reliability of DFB-LDs is examined. The reliability of DFB-LDs is performed by monitoring I-V and L-I characteristics and two degradation phenomena related to the electrical characteristics of LDs are observed during the life tests. The first degradation phenomenon by increasing the reverse current is considered as a formation of leakage current path enough to prevent lasing operation in lateral blocking layer near active region of lasers. The second degradation phenomenon by decreasing the forward current is considered as activation of non-radiative Auger recombination process by thermal energy and the second degradation phenomenon is recovered after the off-test period at room temperature Eventually, evaluating the reliability of DFB LDs can allow us to improved the manufacturability in high-volume manufacturing.

• 전기의세계
• /
• v.29 no.4
• /
• pp.256-259
• /
• 1980

A singular pertubation theory is applied to obtain an approximate solution for suboptimal control of nuclear reactors with spatially distributed parameters. The inverse of the neutron velocity is regarded as a small perturbing parameter, and the model, adopted for simplicity, is a cylindrically symmetrical reactor whose dynamics are described by the one group diffusion equation with one delayed neutron group. The Helmholtz mode expansion is used for the application of the optimal theory for lumped parameter systems to the spatially distributed parameter systems. An asymptotic expansion of the feedback gain matrix is obtained with construction of the boundary layer correction up to the first order.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.454-459
• /
• 2003

We report the first demonstration of 10 Gb/s wavelength conversion in a Mach-Zehnder interferometric wavelength converter monolithically integrated with a loss-coupled DFB probe source. The integrated device is fabricated using a BRS (buried ridge stripe) structure with an undoped InP clad layer on the top of a passive waveguide to reduce high propagation loss. The device exhibited a static extinction ratio of 11 dB. Good performance at 10 Gb/s is obtained with an extinction ratio of 7 dB and a power penalty of 2.8 dB at a 10$^{-9}$ bit error rate.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.280-281
• /
• 2009

Piezoelectric vibrators can be good replacements of electric motors to excite touch screen of a mobile device owing to small volume and low power consumption. One problem to be solved yet for real application is larger excitation force or moment than available currently. More efficient excitation by a piezoelectric vibrator could be achieved by operating at one of resonance frequencies of the system, which must also be as close as possible to frequency range where index finger is most sensitive and increasing transmission force or moment at that frequency. In this study, dynamic models are derived for the piezoelectric exciter and an adhesive viscoelastic layer, which connect the exciter to the screen. The adhesive layer is modeled as distributed stiffness by considering its geometric shape to relative to the piezoelectric exciter. Then, equations of motion for the piezoelectric exciter and the adhesive layer are derived using Hamilton's principle. Based on this model, dynamic characteristics of the exciter will be designed to maximize the force or moment transmitted onto the screen structure.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.7
• /
• pp.97-104
• /
• 1997

Using the ray optics technique, we derive the analytic expressions of TE mode coupling coefficient for five-layer distributed feedback (DFB) structure devices. We compare the coupling coefficient calculated by the ray optics technique with those calulated by the extended additional layer method (EALM) which may be a most accurate method of calculating the coupling coefficient. The difference between the results of the ray optics technique and those of the EALM is small for most cases of grating depth and forms being practically made. In the case of rectangular gratings, the difference increases as the duty cycle of graing deviates from 0.5. In the case of the trapezoidal grating, the difference increases as the ratio of the top to the period of grating deviates from 0.5 and as the length of the top becomes longer than that of the base. The difference of theree-layer DFB structures is smaller than that of five-layer DFB structures.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.131-138
• /
• 2011

We fabricated distributed feedback InGaAsP/InP laser diodes for optical fiber communication module and characterized the lasing properties in continuous wave operation. The active layer of 7-period InGaAsP(1.127 eV)/InGaAsP(0.954 eV) multi-quantum well structure was grown by the metal-organic chemical vapor deposition. The grating for waveguide was also fabricated by the implementation of the Mach-Zehender holographic method of two laser beams interference of He- Cd laser and the fabricated laser diode has the dimension of the laser length of $400{\mu}m$ and the ridge width of $1.2{\mu}m$. The laser diode shows the threshold current of 3.59 mA, the threshold voltage of 1.059 V. For the room-temperature operation with the current of 13.54 mA and the voltage of 1.12 V, the peak wavelength is about 1309.70 nm and optical power is 13.254 mW.

• Korean Journal of Materials Research
• /
• v.13 no.8
• /
• pp.485-490
• /
• 2003

We have developed a new way of the constant growth technique to maintain a grating height of originally-etched V-groove of submicron gratings up to 1.5 $\mu\textrm{m}$ thickness by a low pressure metalorganic chemical vapor deposition. The constant growth technique is well performed on two kinds of submicron gratings that made by holography and electron (e)-beam lithography GaAs buffer layer grown on thermally deformed submicron gratings has an important role in recovering the deformed grating profile from sinusoidal to V-shaped by reducing mass transport effects. The thermal deformation effect on submicron gratings made by e-beam lithography is less than that on submicron gratings made by holography. The constant growth technique is an important step to realize complex optoelectronic devices such as one-step grown distributed feedback lasers and two-dimensional photonic crystals.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.5
• /
• pp.88-98
• /
• 1999

A refractive index modulated (RIM) DFB laser, in which the refractive index of a center region of the upper cladding layer comprising the grating region is different from that of side regions, is proposed to obtain and effective ${\lambda}$/4 phase shift in the center region. Since the coupling coefficient of a center region in a RIM-DFB laser is larger than that of side regions, a RIM-DFB laser has the effect of a distributed coupling coefficient. Simulation results show that RIM-DFB lasers have better operation characteristics - more uniform photon density profile, less SHB effect, and better single mode operation at high injection currents - compared to those of ${\lambda}$/4 phase-shifted DFB lasers and CPM-DFB lasers. In addition, the effect of the center region on the above threshold characteristics of a RIM-DFB laser is investigated.