• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.506-508
• /
• 1999

In the distributed control systems where the control components, controllers and sensors are distributed on a communications network, there exist network time delays on communication lines between the system components. This paper deals with the ramp tracking controller design issue for such systems. Time delay terms are converted into the rational terms using Pade approximation method and the system is augmented with two integrators for ramp tracking. For this system, $\mu$-controller design method, which enables to meet not only performance requirements but robust stabilities simultaneously, is employed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.57-60
• /
• 2001

In the distributed control systems where the control components, controllers and sensors are distributed on a communications network, there exit network time delays on communication lines between the system components. This paper deals with the 2 D.O.F. ramp tracking controller design issue for such system. Time delay terms are converted into rational terms using Pade approximation method and the system is augmented with two integrators for ramp tracking. For this system, $\mu$-controller design method, which enables to meet not only performance requirements but robust stabilities simultaneously, is employed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.951-953
• /
• 1999

In the distributed control systems where the control components, controllers and sensors are distributed on a communications network, there exist network time delays on communication lines between the system components. This paper deals with the ramp tracking controller design issue for such systems. Time delay terms are converted into the rational terms using Pade approximation method and the system is augmented with two integrators for ramp tracking. For this system, ${\mu}$-controller design method, which enables to meet not only performance requirements but robust stabilities simultaneously, is employed.

• 동력기계공학회지
• /
• 제8권1호
• /
• pp.62-68
• /
• 2004

This paper describes a fault tolerant control in distributed PLC(Programmable Logic Controller) system to ensure reliability of controllers which have some faults simultaneously. First, the behavior of PLC is modeled as discrete expressions using Galois field. Then, we design the control laws for additional spare controllers to generate parity code with two dimensions. Finally, the algorithm for estimating normal output instead of abnormal output from the controllers with fault is suggested. Comparing to the traditional duplication method, the suggested method can reduce the number of spare controllers significantly to ensure control reliability. This method will be applied to an automatic system in order to increase reliability. Also, it can improve cost performance of the system.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권1호
• /
• pp.98-104
• /
• 2014

This paper presents the performance analysis of a sliding mode based hybrid controller for three phase voltage source inverter. The main objective of this analysis is to observe the effectiveness of the controller for fault ride through (FRT) capability improvement of the distributed generations (DG). The performance of the conventional PI based cascaded controller is also presented for comparison purpose.

• International Journal of Control, Automation, and Systems
• /
• 제6권1호
• /
• pp.15-23
• /
• 2008

This paper considers the problem of delay-dependent guaranteed cost controller design for uncertain neutral systems with distributed delays. The system under consideration is subject to norm-bounded time-varying parametric uncertainty appearing in all the matrices of the state-space model. By constructing appropriate Lyapunov functionals and using matrix inequality techniques, a state feedback controller is designed such that the resulting closed-loop system is not only robustly stable but also guarantees an adequate level of performance for all admissible uncertainties. Furthermore, a convex optimization problem is introduced to minimize a specified cost bound. By matrix transformation techniques, the corresponding optimal guaranteed controller can be obtained by solving a linear matrix inequality. Finally, a simulation example is presented to demonstrate the effectiveness of the proposed approach.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.758-761
• /
• 2004

This paper proposes a design and implementation of multiplierless digital PID (Proportional-Integral-Derivative) controller using FPGA (Field Programmable Gate Array) for controlling the speed of DC motor in digital system. The multiplierless PID structure is based on Distributed Arithmetic (DA). The DA is an efficient way to compute an inner product using partial products, each can be obtained by using look-up table. The PID controller is designed using MATLAB program to generate a set of coefficients associated with a desired controller characteristics. The controller coefficients are then included in VHDL (Very high speed integrated circuit Hardware Description Language) that implements the PID controller onto FPGA. MATLAB program is used to activate the PID controller, calculate and plot the time response of the control system. In addition, the hardware implementation uses VHDL and synthesis using FLEX10K Altera FPGA as target technology and use MAX+plusII program for overall development. Results in design are shown the speed performance and used area of FPGA. Finally, the experimental results can be shown when compared with the simulation results from MATLAB.

• 한국지능시스템학회논문지
• /
• 제10권2호
• /
• pp.152-160
• /
• 2000

본 논문에서는 확장된 병렬 분산 보상기와 최적 극점 배치 방법을 사용한 비선형 시스템의 퍼지 모델 기반 제어기의 분석과 설계 방법을 제안한다. 설계과정을 설명하면 먼저비선형 시스템을 Takagi-Sugeno 퍼지 모델로 표현하고 확장된 병렬 분산 보상기를 사용하여 제어기 규칙을 작성한다. 그리고 최적 극점 배치 방법을 사용하여 국소 상태 궤환 제어기를 설계하고 이를 이용하여 전체의 퍼지논리제어기를 설계한다. 기존의 사용된 병렬 분산 보상기와는 다르게 본 논문에서 새로이 개발된 확장된 병렬 분산 보상기와 최적 극점 배치 방법을 이용함으로써 안정한 국소 퍼지 제어기의 설계뿐만 아니라 추적 제어 목적도 수행할 수 있는 전체의 안정한 퍼지 제어기도 설계할 수 있다. 게다가 전체 퍼지 모델 뿐만 아니라 실제 비선형 시스템에 대해서도 안정도 분석을 행하였다 마지막으로 제안된 퍼지 모델 기반 제어기 설계 방법의 효율성과 가능성을 하나의 시뮬레이션 예를 통하여 증명하였다.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제6권11호
• /
• pp.453-462
• /
• 2017

본 논문에서는 SDN (Software Defined Networking) 오픈소스 프레임워크인 오픈데이라이트(ODL, OpenDaylight) 컨트롤러 클러스터 환경에서 클러스터의 구조를 분석하며 고가용성(High availability)을 지원하는 컨트롤러 클러스터의 동작 방식을 다룬다. 또한 Raft 알고리즘의 리더 선정(Leader Election) 과정을 분석하고 효율적인 시스템 운용을 위한 Leader Election 과정의 개선 방안을 제안한다. 이와 함께 샤드(Shard) 리더와 샤드 팔로어의 성능차이를 제시하고, 기존과 제안 방식의 컨트롤러 클러스터의 성능을 비교 분석한다. 실험의 결과에 따르면 리더의 성능은 팔로어의 성능보다 좋으며 하나의 컨트롤러로 요청이 집중되어 전달될 때보다 분산된 컨트롤러로 요청이 전달될 때의 성능이 더 좋다. 따라서 제안 기법을 통하여 컨트롤러로의 요청을 분산함으로써 성능을 높일 수 있다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.3-9
• /
• 2008

Recently, the plant industries are being activated and plant control systems use various technologies. Because the optimized design for the plants is very important for the reducing of operation and maintenance costs, automatic control systems become more important. Plant control systems consist of the master controller, the plant networks, the programming environment for engineering, monitoring software and the field devices. The control systems should have reliability, availability and safety. Modular architecture of hardware and software makes flexible configuration of the control systems. Each component should have diagnostic functions. It follows industrial standards and makes open systems. Open systems increase accessibility against the data which is distributed in the plants. The controllers including processor and communication modules use the up-to-date technology. They have real time and fault tolerant function by duplicating processors or networks. It also enables to make the distributed control systems. The distributed architecture makes more scalable main control system. Automatic control systems can be operated with better performance. In this paper, we analyzed the requirements of the seawater desalination plants and made some consideration facts for developing the optimized controller. Also we described the design concept of the main controller, which consists of several modules. We should validate and complement the design for the reliability and better performance.