• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.100-103
• /
• 1999

In this paper, a method for the efficient implementation of the PICNET network configurator for a distributed control system(DCS) is proposed. The network configurator is composed of the time parameter estimator and the period scheduler, the file generator. The main role of network configurator estimates time parameter, the pre-run time scheduling of the user input and make the period transmission table for operating the PICNET based distributed control system.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.404-411
• /
• 2004

With distribution industrial control system, the use of low cost to achieve a highly reliable and safe system in real time distributed embedded application is proposed. This developed intelligent node is based on two microcontrollers, one for the execution of the application code, also as master controller for ensuring the real time control & the logic operation with CPLD and other for communication task and the easy control execution, i.e., I/O digital input, digital output and interrupting. This paper also presents where the case NCS (Networked control system) with LonTalk protocol is applied for the filtration process control system of a small water treatment plant.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.88.1-88
• /
• 2001

The paper describes a new approach to the organization of an artificial brain for mobile multi-robot systems, where individual robots are not considered as independent entities, but rather forming together a universal parallel and distributed machine capable of processing both information and physical matter in distributed worlds. This spatial machine, operating without any central control, is driven on top by distributed mission scenarios in WAVE-WP language. The scenarios can be written on a variety of levels, and any mixture of them, supporting the needed system flexibility and freedom ...

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.657-659
• /
• 2004

CAN is a serial communication bus for real-time controls and automations in distributed control systems. In distributed control systems, occasionally a sensor module and a controller are not in the same node and physically separated. In order for the signal from a sensor node to reach the controller node, the signal must travel through network. CAN has a certain capabilities to deal with real-time data. However, when many nodes on the networks try to send data on the same network, the arbitration mechanism to solve the data collision problem is necessary. This situation causes the time delay which has detrimental effects on the performance of the control systems. This paper proposes a method to solve the problem due to the time delay in distributed control system using CAN. Time delay is approximated to an element with a rational transfer function using Pade approximation and Mu~synthesis method is applied. Since time delay in the network is not constant, the time delay element is considered to be an uncertainty block with a bound. The proposed method is applied to the experimental system with CAN and proved to be effective.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1261-1268
• /
• 2013

This study proposes a voltage and reactive coordinative control strategy with distributed generator (DG) in a distribution power system. The aim is to determine the optimum dispatch schedules for an on-load tap changer (OLTC), distributed generator settings and all shunt capacitor switching on the load and DG generation profile in a day. The proposed method minimizes the real power losses and improves the voltage profile using squared deviations of bus voltages. The results indicate that the proposed method reduces the real losses and voltage fluctuations and improve receiving power factor. This paper proposes coordinated voltage and reactive power control methods that adjust optimal control values of capacitor banks, OLTC, and the AVR of DGs by using a voltage sensitivity factor (VSF) and dynamic programming (DP) with branch-and-bound (B&B) method. To avoid the computational burden, we try to limit the possible states to 24 stages by using a flexible searching space at each stage. Finally, we will show the effectiveness of the proposed method by using operational cost of real power losses and voltage deviation factor as evaluation index for a whole day in a power system with distributed generators.

• International Journal of Control, Automation, and Systems
• /
• 제6권2호
• /
• pp.186-193
• /
• 2008

The Internet's low cost and ubiquity present an attractive option for real-time distributed control of processes on the factory floor. When integrated with the Internet, the LonWorks open control network can give ubiquitous accessibility with the distributed control nature of information on the factory floor. One of the most important points in real-time distributed control of processes is timely response. There are many processes on the factory floor that require timely response. However, the uncertain time delay inherent in the network makes it difficult to guarantee timely response in many cases. Especially, the transmission characteristics of the LonWorks/IP network show a highly stochastic nature. Therefore, the time delay problem has to be resolved to achieve high performance and quality of the real-time distributed control of the process in the LonWorks/IP Virtual Device Network (VDN). It should be properly predicted and compensated. In this paper, a new distributed control scheme that can compensate for the effects of the time delay in the network is proposed. It is based on the PID controller augmented with the Smith predictor and disturbance observer. Designing methods for output feedback filter and disturbance observer are also proposed. Tracking position control experiment of a geared DC Servo motor is performed using the proposed control method. The performance of the proposed controller is compared with that of the Internal Model Controller (IMC) with the Smith predictor. The result shows that the performance is improved and guaranteed by augmenting a PID controller with both the Smith predictor and disturbance observer under the stochastic time delay in the LonWorks/IP VDN.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1794-1803
• /
• 1989

This paper presents and evaluates a distributed routing algorithm for effective routing control in circuit-switched multistage interconnection networks. The proposed method uses the distributed control based on the incividual-switching element control and it is very effective for allowing any broadcast connection from a source to arbitrary number of destinadtions. The performnace of the proposed method is analyzed and evaluated by computer simulation in terms of the normalized average time delays.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.600-603
• /
• 2000

In this paper, we propose the design method of distributed control system using Controller Area Network (CAN). CAN is an advanced serial communication protocol for distributed real-time control systems. It is a contention-based multi-master network whose timeliness properties come from its collision resolution algorithm which gives a high schedulable utilization and guaranteed bus access latency. With proposed method using CAN, we apply to robot controller. The effectiveness of proposed method is demonstrated by the simulation and experiment.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.154-160
• /
• 2003

원격지에 위치한 분산제어 시스템과 센서 데이터 또는 제어 명령을 주고받을 때에는 불확실한 시간지연이 발생한다. TCP/IP 프로토콜을 이용한 데이터 네트워크와 마찬가지로 데이터 네트워크와 디바이스 네트워크를 결합한 가상 디자이스 네트워크도 불확실한 시간지연이 내재되어 있다. 이러한 시간지연은 분산제어시스템의 성능을 저하시키고 불안전성을 야기하는 원인이 된다. 본 논문에서는 이러한 네트워크상에 내재하는 시간지연을 평가하고 부정적인 효과를 최소화하기 위하여 Smith Predictor를 적용하였다. 제안된 제어 알고리즘은 실시간 서보제어를 통하여 효과를 입증하였으며 가상 디바이스 네트워크 개념에 근거한 분산제어 시스템을 이용하여 실시간 예지보전을 수행할 때 효과가 있음을 제시하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2230-2234
• /
• 2003

This paper proposes a distributed simulator for general control system in CEMTool. Systems can be described by SIMTool likes the simulink in Matlab. For distributed simulation, we can seperate any system into several parallel subsystems in SIMTool. The number of parallel subsystem can be determined by the system's property. After seperation, parallel simulator will do initialization, one-step-ahead simulation, block-distribution and ordering and so on. Finally, simulator will create independent C codes and executive files for each subsystem. The whole system is fulfilled by several PCs, and each PC executes one subsystem. There are communications among these subsystem using reflective memory or ethernet. We have made several experiments, and the 5-stand cold rolling mill control system is our main target. The result of parallel simulation has shown effective speedup in comparison with one pc simulation.