• 대한전자공학회논문지
• /
• 제3권2호
• /
• pp.10-17
• /
• 1966

어떤 R-C 분포회로의 징분방정식의 해가 기지일 때 이것을 이용하여 다수의 다른 분포회로의 징분방정식의 해를 구하는 방법이 얻어졌다. 임의의 R-C 분포회로를 제작의 편의상 R(x)C(x)=일정인 회로로 등가변환하는 도해적방법이 얻어졌으며 해석적증명도 가능하다. 또 이론적 취급의 통일과 간단을 위하여 임의의 R-C분포회로를 R(x), C(x) 어느 한쪽이 일정한 분포회로로 등가변환하는 방법이 얻어졌다. 이 후자의 회로와 근사적인 집중정수회로를 생각하므로서 분포회로의 근사적인 해석, 합성이 비교적 간단하게 이루어 질 수 있다. 6x A method by which solutions of the differential equations of any other distributed circuits can be obtained is described when the solution of the differential equation of an R-C distributed amplifier is known. A graphical method of transforming any R-C ditributed circuit into an equivalent circuit which has a constant R(x)-C(x) was also obtained. The theoretical verification of this method is possible. For simplicity, any R-C distributed circuit can be transformed into an equivalent circuit which is a distributed circuit of either constant R(x) or C(x). Using this equivalent circuit and considering a lumped circuit, an approximate analysis and synthesis can be made simply.

• 전력전자학회논문지
• /
• 제18권2호
• /
• pp.117-122
• /
• 2013

The distributed power conversion LED driver circuit using parasitic inductance is proposed in this paper. while the conventional LED driver circuit is composed of the large size devices and heatsinks, the proposed circuit can be realized with the small sized no heatsink based. since the processing power can be effectively distributed. Also by using the wire parasitic inductance of the LED string, the proposed circuit can be implemented without external magnetic device. As a result, the proposed circuit which features the small size and volume con be realized even without LED driver module(LDM) board. since, all the device can be attached to the existing LED array Module(LAM) board. Therefore, it features that cost savings and volume reduction of circuit. To confirm the validity of the proposed circuit, theoretical analysis and experimental results from a distributed power conversion LED driver circuit prototype are presented.

• 전기학회논문지
• /
• 제59권6호
• /
• pp.1103-1108
• /
• 2010

A grounding electrode has the transient grounding impedance characteristics against lightning surges. So the performance of grounding electrodes should be evaluated as a grounding impedance as well as the ground resistance. The frequency-dependent grounding impedance is varied with the shape and size of grounding electrode and is divided into both inductive and capacitive behaviors. This paper presents a theoretical analysis for the grounding impedance determined by the size of grounding electrode using the distributed parameter circuit model. EMTP and Matlab programs were used in calculating the frequency-dependent grounding impedances of vertical grounding electrodes. It was found that the frequency-dependent grounding characteristics of vertical grounding electrodes are characterized by the distributed parameters which are changed in the dimension of grounding electrodes.

• 대한전자공학회논문지
• /
• 제4권4호
• /
• pp.13-18
• /
• 1967

삼각함수형 선형 수동 RC분포회로의 전압전달함수의 모든 극점은 s-평면상에서 부의 실축상에 존재하므로 unit step input에 대한 과도응답은 단조한 특성을 갖는다. 이러한 특성은 집중정수회로에 적용하였던 Elmore의 상승시간 및 지연시간 계산방법을 RC분포회로에도 적용시킬 수 있는 충분한 조건이므로 본 논문에서는 삼각함수형 RC분포회로의 과도응답특성해석을 위의 방법으로 시도하였다. 그 결과 이 회로의 상승시간 및 지연시간은 시정수 및 거리각 θ의 증가와 더불어 이들 시간도 증가함을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.412-414
• /
• 2004

In this paper, a novel algorithm of underground cable fault location based on the analysis of distributed parameter circuit is proposed. The proposed method makes voltage and current equations about core and sheath, and then establishes a function of the fault distance according to the analysis of fault conditions. Finally gets the solution of this function through Newton-Raphson iteration method. The effectiveness of proposed algorithm has been verified by Matlab program, and the cable parameters such as impedance and admittance are from EMTP simulation.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.1861-1868
• /
• 2009

A ground electrode subjected to lightning surge current shows the transient impedance behaviors. The ground electrode for protection against lightning should be evaluated in view of the transient grounding impedance and conventional grounding impedance, not ground resistance. The transient impedance characteristics of ground electrodes are influenced by the shape of ground electrode and the soil characteristics, as well as the waveform of lightning surge current. In order to propose a simulation method of analyzing the transient impedance characteristics of the grounding system in practical use, this paper suggests a theoretical analysis method of distributed parameter circuit model to simulate the transient impedance characteristics of counterpoise subjected to lightning surge current. EMTP and Matlab programs were employed to compute the transient grounding impedances of three counterpoises with different lengths. As a consequence, the simulated results using the proposed distributed parameter circuit model are in good agreement with the measured results.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권5호
• /
• pp.197-202
• /
• 2002

In this paper, the characteristics of the household AC power line network is analyzed for the low bit rate powerline communication (PLC) in the frequency range from 10㎑ to 450㎑ The PLC channel transfer characteristics including its characteristic impedance are derived based on the network topology which is constructed with the household power lines loaded with the various types of electric apparatus. Both the distributed circuit analysis and the lumped circuit model based analysis are applied for the characterization of the PLC channel and the results are compared by the computer simulations. The analysis illustrates very well the adverse effects caused by the loading of electric apparatus and as well those casued by the reflection of wavers in the household AC Power line communication network.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.88-91
• /
• 2009

For lightning currents, a grounding system shows the transient grounding impedance characteristics. A grounding system for protection against lightning should be evaluated by the transient grounding impedance, not it's ground resistance. The transient grounding impedance varies with the shape of ground electrode and earth characteristics as well as the waveform of lightning surge current. For the analysis and practical use of transient grounding impedance, the characteristics of transient grounding impedance should be analyzed theoretically and this paper suggests the theoretical analysis for the transient grounding impedance of counterpoise by using the distributed parameter circuit model. EMTP and Matlab are used to simulate the distributed parameter circuit model of counterpoise and the adequacy of the distributed parameter model of counterpoise is examined by comparing the simulated results with the measured results.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권12호
• /
• pp.589-595
• /
• 2004

The ESD protection characteristic of chip varistors on a circuit board can not be analyzed by using a conventional circuit simulator due to its microwave characteristic. Thus, by employing Agilent's microwave circuit simulator ADS, we showed that the ESD Protection characteristic or chip varistors can be investigated. order to got more precise simulation results, a chip varistor model was extracted from the electrical characteristic of a TDK's chip varistor and the distributed circuit based pattern was designed as the ESD propagation path. The simulation results showed that the ESD protection characteristic of a chip varistors can be improved drastically by reducing the ESD propagation path.

• 한국소음진동공학회논문집
• /
• 제13권3호
• /
• pp.180-185
• /
• 2003

The equivalent electroacoustic circuit approach has been conventionally used for the analysis of the multiple layer perforated plate system. However, it is found that an analogy error has been involved in the equivalent electroacoustic approach proposed by previous researchers for the element of straight pipe. Although the pipe between the perforated layers is a distributed element in the analogy, it has been treated as a parallel element by previous investigators. The analogy error is demonstrated by comparing the calculated absorption coefficients based on the parallel circuit and the distributed circuit, respectively, with the measured values by the two-microphone impedance tube method.