• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.3
• /
• pp.30-36
• /
• 1975

Distortions are analyzed and compared for two TDM channel expansion methods- periodic sample skipping and sampling frequency reduction. Signal is assumed to be stationary random signal with zero.mean. Channel noise and interference are not considered in the analysis. For speech signal, it is shown that the periodic sample skipping method could be a better choice under practical design constraints.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.35-41
• /
• 2007

This paper presents the results of investigating harmonic levels on medium voltage motors at loading conditions in air separation plant. The essential results of the measurements of the medium voltage motor harmonics are summarized in the values for the total harmonic distortion (THD). Motors loading case is used to assess the current and voltage harmonic distortions. Proper system analysis is important when adding a new motor starting and controlling the equipment. With the result of the paper it is possible to suggest the most appropriate starting and control method. Two medium voltage motors of air separation unit measurement results and simulations are summarized. Both current and voltage harmonic distortions are fitted by using a linear and exponential regression model. The prediction of THD values can be used for this kind of process for future planning by utilities.

• Proceedings of the KSEEG Conference
• /
• 2000.04b
• /
• pp.308-310
• /
• 2000

Sampling rates become inconsistent when spatial data in spherical coordinate are re-sampled with respect latitudinal or longitudinal degree for mathematical processes such as Fourier Transfrom, and this results in the distrtions of the processed data in the wavenmber domain. This distortions are more evident in the polar regions. An example is presented to show such distortions during the recovery process of free-air gravity anomalies from ERSI radar atimeter data in Russian Arctic Barents Sea, and a method is present to minimize the distortion using Lambect Conformal Conic map projection.

• Journal of the Korean Magnetic Resonance Society
• /
• v.6 no.2
• /
• pp.142-154
• /
• 2002

One of the oldest, still unsolved, and often ignored problems in magnetic resonance remains the issue of how to observe undistorted, normal one-dimensional spectra where the frequencies and their relative intensities represent faithfully the distribution of spins and sites in the sample within the magnet. Often distortions in these parameters are accepted, as the price of sensitivity enhancement, or because it is unclear just how these distortions might be avoided. Surprisingly enough, the problem is exacerbated by the use of modern techniques of pulsed Fourier transform NMR. Noise spectroscopy is an approach to solving the problem of distorted NMR spectra, which is largely under appreciated; it promises virtually "unlimited" distortionless bandwidths without costly hardware investments. Nonetheless, its exploitation remains limited. We will discuss why noise spectroscopy belongs in the arsenal of tricks spectroscopists should be aware of, show examples where its use is essential if accurate, quantitative NMR is to be expected, and discuss some recent approaches which extend its applicability yet further, particularly in solid state NMR and in applications to quadrupolar nuclear spins.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.273-274
• /
• 2012

This paper investigates control algorithms for a doubly fed induction generator(DFIG) with a back-to-back three-level neutral-point clamped voltage source converter in medium voltage wind power system under unbalanced grid conditions. Two different control algorithms to compensate for unbalanced conditions are proposed. Evaluation factors of control algorithm are fault ride-through(FRT) capability, efficiency, harmonic distortions and torque pulsation. Zero regulated negative sequence stator current control algorithm has the most effective performance concerning FRT capability and efficiency. Ripple-free control algorithm nullifies oscillation component of active power and reactive power. Ripple-free control algorithm shows the least harmonic distortions and torque pulsation. Combination of zero regulated negative sequence stator current and ripple-free control algorithm control algorithm depending on the operating requirements and depth of grid unbalance presents the most optimized performance factors under the generalized unbalanced operating conditions leading to high performance DFIG wind turbine system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.696-705
• /
• 1997

This paper presents an efficient adaptive predistortion technique compensating linear and nonlinear distortions caused by high-power amplifier (HPA) with memory in OFDM systems. The efficient adaptive data predistortion techniques proposed for compensation of HPA with memory in single carrier systems cannot be applied to OFDM systems since the possible input levels for HPA is infinite in OFDM systems. Also, previous adaptive predistortion techniques, based on Volterra series modeling, are not suitable for real-time implementation due to high computational burden and slow convergence rate. In the proposed approach, the memoryless HPA preceded by a linear filter in OFDM systems is modeled by the Wiener system which is then precompensated by the proposed adaptive predistorter with a minimum number of filter taps. An adaptive algorithm for adjusting the proposed adaptive predistorter is derived using the stochastic gradient method. It is demonstrated by computer simulation that the performance of OFDM system suffering from nonlinear distortion can be greatly improved by the proposed efficient adaptive predistorter using a small number of filter taps.

• Korean Journal of Geomatics
• /
• v.4 no.1
• /
• pp.23-30
• /
• 2004

This study aims to establish interior orientation for various types of sensors including frame cameras, panoramic cameras, line cameras, and whisk-broom scanners. To do so, this study suggests the classification of components of interior orientation of which elements are different according to the sensors. This is entailed by incorporation of sensor characteristics into mathematical models of interior orientation parameters are suggested for being used as guidelines in recovering systematic distortions. Finally, the potential errors resulted from the assumption of regarding sensor model of whisk-broom scanner model as that of push-broom scanner are discussed.

• Korean Journal of Remote Sensing
• /
• v.19 no.5
• /
• pp.363-370
• /
• 2003

This paper describes a rectification procedure that relies on a polynomial model derived from the imaging geometry without loss of accuracy. By using polynomial model, one can effectively eliminate the iterative process to find an image pixel corresponding to each output grid point. With the imaging geometry and ephemeris data, a geo-location polynomial can be constructed from grid points that are produced by solving three equations simultaneously. And, in order to correct the local distortions induced by the geometry and terrain height, a distortion model has been incorporated in the procedure, which is a function of incidence angle and height at each pixel position. With this function, it is straightforward to calculate the pixel displacement due to distortions and then pixels are assigned to the output grid by re-sampling the displaced pixels. Most of the necessary information for the construction of polynomial model is available in the leader file and some can be derived from others. For validation, sample images of ERS-l PRI and Radarsat-l SGF have been processed by the proposed method and evaluated against ground truth acquired from 1:25,000 topography maps.

• Structural Engineering and Mechanics
• /
• v.40 no.2
• /
• pp.245-256
• /
• 2011

In this paper, the use of universal serendipity elements (USE) to eliminate node mapping distortions for dynamic problem is presented. Rectangular shaped elements for USE are being introduced by using a flexible master element with an adjustable edge node location. The shape functions of the universal serendipity formulation are used to derive the mass and damping matrices for the dynamic analyses. These matrices eliminate the node mapping distortion errors that occurs incase of the standard shape function formulations. The verification of new formulation will be tested and the errors encountered in the standard formulation will be studied for a dynamically loaded deep cantilever.

• The Journal of Economics, Marketing and Management
• /
• v.3 no.2
• /
• pp.1-8
• /
• 2015

In this paper, the effects of auditor change on audit quality in companies accepted in Tehran stock exchange placed review and we assessed the presence or absence of a significant correlation between them. to assess the quality of data auditing and tax distortions, falsification of accounting estimates, distortion of rules, distortion caused by mistakes in applying accounting policies and other distortions are used as the dependent variable Is. the sample group consisted of 56 companies as experimental group and a control group of 56 other companies a 4-year period, during the years 2011 to 2014 were studied. data needed for research discovery success ratio distortion before and after the change of auditor. To test the research hypotheses paired comparison method is used.