• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1830-1843
• /
• 2018

In this paper, the generation of a reference current and voltage signal based on a Kalman filter is offered for a 3-phase 4wire UPQC (Unified Power Quality Conditioner). The performance of the UPQC is improved with source voltages that are distorted due to harmonic components. Despite harmonic and frequency variations, the Kalman filter is capable enough to determine the amplitude and the phase angle of load currents and source voltages. The calculation of the first state is sufficient to identify the fundamental components of the current, voltage and angle. Therefore, the Kalman state estimator is fast and simple. A Kalman based control strategy is proposed and implemented for a UPQC in a distribution system. The performance of the proposed control strategy is assessed for all possible source conditions with varying nonlinear and linear loads. The functioning of the proposed control algorithm with a UPQC is scrutinized and validated through simulations employing MATLAB/Simulink software. Using a FPGA SPATRAN 3A DSP board, the proposed algorithm is developed and implemented. A small-scale laboratory prototype is built to verify the simulation results. The stated control scheme for the UPQC reduces the following issues, voltage sags, voltage swells, harmonic distortions (voltage and current), unbalanced supply voltage and unbalanced power factor under dynamic and steady-state operating conditions.

• Korean Journal of Remote Sensing
• /
• v.12 no.1
• /
• pp.26-42
• /
• 1996

The CCD Earth Images Experiment(CEIE) is one of the main payload of the KITSAT-1. Since it was launched on Oct. 10, 1992, the CEIE has taken more than 500 images on the Earth surface world-wide so far. An image from the space is very different from a feature on the real Earth surface due to various radiometric and geometric distortions. Preprocessing to remove those distortions has to take place before the images data are processed and analyzed further for various applications. This paper describes the procedure to perform preprocessing including radiometric and geometric correction.e-processing system. The GCP marking using this technique showed a sufficient accuracy for KITSAT1,2 narrow camera images.

• Journal of Multimedia Information System
• /
• v.9 no.2
• /
• pp.75-86
• /
• 2022

The existing image quality assessment (IQA) datasets have a small number of samples. Some methods based on transfer learning or data augmentation cannot make good use of image quality-related features. A No Reference (NR)-IQA method based on multi-task training and quality awareness is proposed. First, single or multiple distortion types and levels are imposed on the original image, and different strategies are used to augment different types of distortion datasets. With the idea of weak supervision, we use the Full Reference (FR)-IQA methods to obtain the pseudo-score label of the generated image. Then, we combine the classification information of the distortion type, level, and the information of the image quality score. The ResNet50 network is trained in the pre-train stage on the augmented dataset to obtain more quality-aware pre-training weights. Finally, the fine-tuning stage training is performed on the target IQA dataset using the quality-aware weights to predicate the final prediction score. Various experiments designed on the synthetic distortions and authentic distortions datasets (LIVE, CSIQ, TID2013, LIVEC, KonIQ-10K) prove that the proposed method can utilize the image quality-related features better than the method using only single-task training. The extracted quality-aware features improve the accuracy of the model.

• Journal of KIBIM
• /
• v.11 no.4
• /
• pp.42-52
• /
• 2021

Paneling building facades is one of the essential procedures in building construction. Traditionally, it has been an easy task of simply projecting paneling patterns drawn in drawing boards onto 3d building facades. However, as many organic or curved building shapes are designed and constructed in modern architectural practices, the traditional one-to-one projection is becoming obsolete for the building types of the kind. That is primarily because of the geometrical discrepancies between 2d drawing boards and 3d curved building surfaces. In addition, curved compound surfaces are often utilized to accommodate the complicated spatial programs, building codes, and zoning regulations or to achieve harmonious geometrical relationships with neighboring buildings in highly developed urban contexts. The use of the compound surface apparently makes the traditional paneling pattern projection more challenging. Various mapping technics have been introduced to deal with the inabilities of the projection methods for curved facades. The mapping methods translate geometries on a 2d surface into a 3d building façade at the same topological locations rather than relying on Euclidean or Affine projection. However, due to the intrinsic differences of the planar 2d and curved 3d surfaces, the mapping often comes with noticeable distortions of the paneling patterns. Thus, this paper proposes a practical method of drawing paneling patterns directly on a curved compound surface utilizing Geodesic, which is faithful to any curved surface, to minimize unnecessary distortions.

• Korean Journal of Remote Sensing
• /
• v.39 no.3
• /
• pp.297-309
• /
• 2023

The degradation of coastal ecosystems and fishery environments is accelerating due to the recent phenomenon of invertebrate grazers. To effectively monitor and implement preventive measures for this phenomenon, the adoption of remote sensing-based monitoring technology for extensive maritime areas is imperative. In this study, we compared and analyzed the robustness of deep learning-based object detection modelsfor detecting and monitoring invertebrate grazersfrom underwater videos. We constructed an image dataset targeting seven representative species of invertebrate grazers in the coastal waters of South Korea and trained deep learning-based object detection models, You Only Look Once (YOLO)v7 and YOLOv8, using this dataset. We evaluated the detection performance and speed of a total of six YOLO models (YOLOv7, YOLOv7x, YOLOv8s, YOLOv8m, YOLOv8l, YOLOv8x) and conducted robustness evaluations considering various image distortions that may occur during underwater filming. The evaluation results showed that the YOLOv8 models demonstrated higher detection speed (approximately 71 to 141 FPS [frame per second]) compared to the number of parameters. In terms of detection performance, the YOLOv8 models (mean average precision [mAP] 0.848 to 0.882) exhibited better performance than the YOLOv7 models (mAP 0.847 to 0.850). Regarding model robustness, it was observed that the YOLOv7 models were more robust to shape distortions, while the YOLOv8 models were relatively more robust to color distortions. Therefore, considering that shape distortions occur less frequently in underwater video recordings while color distortions are more frequent in coastal areas, it can be concluded that utilizing YOLOv8 models is a valid choice for invertebrate grazer detection and monitoring in coastal waters.

• Journal of Internet Computing and Services
• /
• v.11 no.5
• /
• pp.27-35
• /
• 2010

In this paper, we propose a method that can compensate the geometric distortions of image caused from an arbitrary nonflat display surface(or wall) under the environment of portable overhead projector without a flat screen. In the proposed method, we first project a grid pattern to an arbitrary nonflat display surface and then derive an equation of straight line that represents the geometry relationship between the distorted grid pattern and the original grid pattern. Next, after determining the proper size of the original grid pattern according to the form of the display surface, we generate a compensation pattern from the derived equation of straight line, which can symmetrically compensate for the distorted image. Finally, we compensate for the geometric distortions of the projected image by segmenting the real image to be projected from portable overhead projector and prewarping it according to the compensation pattern. To evaluate the proposed method, we performed experiments of image compensation on inclined surface, bent surface and curved surface that are frequently occurred in the environment of portable overhead projector without a flat screen. From the experimental results, we found that the proposed method could be very effective in compensating for the general types of the geometric distortions of the projected images.

• Korea and Global Affairs
• /
• v.3 no.1
• /
• pp.5-38
• /
• 2019

After the democratization movement in 1987, korean politics was transformed into three kim's politics by y Kim Yeong-sam, Kim Dae-jung and Kim Jong-pil. Before the time of three kim's politics, korean politics lasted for one long term, but three kim's politics made possible the peaceful regime change through political party integration and party coalition. The evaluation of three kim's politics coexist both positive and negative. The Positive political effects are diversification of political party composition and stabilization of regime change. Three kim's politics transformed the political party composition of Korea from a two-party system to a multi-party system, made possible a peaceful regime change through the unification of three parties and the DJP coalition. However, the negative political distortions of three kim's politics are the shortening of political parties and the concentration of political ideology. In three kim's politics, political party in Korea has a very short life due to the creation of political parties, the dissolution of political parties, the reorganization of political parties and the integration of political parties. Conservatism and progressive tendencies related three kim's politics were stabilized through Yeongnam region and Honam region. Therefore, three kim's politics means that the proportion of Korean politics is very high. Political effects and distortions derived from three kim's politics have become a challenge for Korean politics to overcome.

• Phonetics and Speech Sciences
• /
• v.16 no.1
• /
• pp.33-40
• /
• 2024

This study investigated acoustic features in spectral moment analysis, comparing accurate articulations with distortions of alveolar fricatives such as dentalization, palatalization, and lateralization. A retrospective analysis was conducted on speech samples from 61 children (mean age: 5.6±1.5 years, 19 females, 42 males) using the Assessment of Phonology & Articulation for Children (APAC) and Urimal-test of Articulation and Phonology I (U-TAP I). Spectral moment analysis was applied to 169 speech samples. The results revealed that the center of gravity of accurate articulations was higher than that of palatalization, while palatalization was lower than dentalization. The variance of dentalization was higher than that of both accurate articulations and palatalization. The skewness of dentalization was higher than that of accurate articulations, and the skewness of palatalization was higher than that of accurate articulations. The kurtosis of palatalization was higher than that of both accurate articulations and dentalization. No significant differences were observed for the position of fricatives (initial, medial) and tense type (plain, tense) across all variables of spectral moment analysis for each distortion type. This study confirmed distinct patterns in center of gravity, variance, skewness, and kurtosis depending on the type of alveolar fricative distortion. The objective values provided in this study will serve as foundational data for diagnosing alveolar fricative distortions in children with speech sound disorders.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.113-117
• /
• 2003

The digital systems include the noise in power supply, ground and packaging due to a simultaneous switching of signal, signal reflections and distortions on single and multiple transmission lines. The requirement for the controlled impedance on a PCB can be both a critical success factor and a design challenge. So, the invented tool simulates the tracks controlled impedance with the test coupon. It can saves the design time and supports the economical PCB design.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.187-190
• /
• 2001

In this paper, we present a novel digital watermarking technique based on the concept of multiresolution decomposition and Human Visual System(HVS). Proposed watermarking is to embed watermark by quantization, that is to construct ‘perceptually lossless’quantization matrix, by using a quantization factor for each level and orientation and variance within a band. We compare our approach with another wavelet domain watermarking methods. Simulation results show the superior performance of robustness for variety image distortions.