• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.323-326
• /
• 2005

Several video coding standards, such as MPEG-4 and H.263, have been investigated to reduce the resulting number of bits while pursuing the maximum video quality. The recent video coding standard, H.264, provides higher coding efficiency than previous coding standards by using the mode decision scheme. For mode decision, H.264 chooses the best macroblock mode among the several candidates using Lagrangian cost function which reflects both the rate and the distortion. H.264 employs only one rate-distortion optimization (RDO) model for all macroblocks. Since the characteristics of each macroblock is different, each macroblock should have its own RDO model. In this paper, we propose an adaptive rate-distortion optimization algorithm for H.264. We regulate the Lagrangian multiplier considering the picture type and characteristics of each macroblock.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.1999-2001
• /
• 1997

The main two drawbacks of the Sin91e Stage PFC (SS-PFC) converters employing a DCM Boost PFC cell are relatively high voltage stress on the bulk capacitor and the input current harmonic distortion. The high voltage stress on bulk capacitor makes the SS-PFC converter impractical in a universal input application and the input current harmonic distortion lowers power factor. In this paper a selective variable frequency control that reduces the voltage stress on the bulk capacitor and the input current harmonic distortion is proposed. Computer simulation results of the proposed control method are presented.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.3
• /
• pp.133-141
• /
• 1996

As the recording density of digital magnetic recording channels increased, the nonlinear distortion caused by inadequate rise-times, demagnetizing field, and overwrite effect during the recording process becomes significant, resulting in limitation on the recording rate. In this paper, a new method for identifying the nonlinear distortion in hihg-density magnetic recording channel using and i.i.d. (independent, identically distributed) inut is described. The proposed method does not require the operatin of large-size matrix inversion which are necessary for the conventional method, and it enables us to estimate nonlinear parameters transition shifts, which can be used to compensate the nonlinear distortion, is demonstrated by computer simulations.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.4
• /
• pp.101-110
• /
• 1996

Color image quantization is a process of selecting a set of colors to display an image with some representative colors without noticeable perceived difference. It is very important in many applications to display a true color image in a low cost color monitor or printer. the basic problem is how to display 224 colors with 256 or less colors, called color palette. In this paper, we propose an algorithm to design the 256 or less size color palette by using spatial maskin geffect of HVS and subjective distortion measure weighted by color palette by using spatial masking effect of HVS and subjective distortion measure weighted by color activity in 4*4 local region in any color image. The proposed algorithm consists of octal prequantization and subdivision quantization processing step using the distortion measure and modified Otsu's between class variance maximization method. The experimental results show that the proposed algorithm has higher visual quality and needs less consuming time than conventional algorithms.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.9 s.240
• /
• pp.971-978
• /
• 2005

Effects of inlet distorted flow on performance, stall and surge are experimentally investigated for a high-speed centrifugal compressor. Tested results for the distorted inlet flow cases are compared with the result of the undistorted one. The performance of compressor is slightly deteriorated due to the inlet distortion. The inlet distortion does not affect the number of stall cell and the propagation velocity. It also does not change stall inception flow rate. However, as the distortion increases, stall starts at the higher flow rate for low speed and at the lower flow rate for high speed. For 50,000 rpm stall occurrs as the flow rate decreases, however disappears fur the smaller flow rate. This is due to the interaction of surge and stall. After the stall and surge interact, the number of stall cell decreases.

• International Journal of Quality Innovation
• /
• v.5 no.1
• /
• pp.68-84
• /
• 2004

The measured values of a same object should remain constant regardless of the object's position in the image. In other words, its measured values should not vary as its position in the image changes. However, lens' image distortion, heterogeneous light source, varied angle between the measuring apparatus and the object, and different surroundings where the testing is set up will all cause variation in the measurement of the object when the object's position in the image changes. This research attempts to compensate the machine vision image distortion caused by the object's position in the image by developing the compensation table. The compensation is accomplished by facilitating users to obtain the correcting object and serves the objective of improving the precision of measurement.

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.289-291
• /
• 2004

The purpose of this study is to identify the effects of the length of tack weldment on the rotational distortion at the one side SA butt weldment using experiment. The maximum rotational distortion at the end of the SA weldment decrease with an increase in the length of tack weld length, while the maximum rate of the distortion increases. This result indicates that the increase of the length of the tack weldment at the one-side SA butt weldment does not prevent the hot cracks.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.78-80
• /
• 2007

The residual flux in transformer's iron cores leads to a distortion of short-circuit current occasionally. And some considerable distortion may have effect on the validation of the test results. To avoid the substantial distortion, a suitable pretest is performed before the actual test. In case of applying this method there must be excessive overvoltage due to switching of an unloaded transformer and chopping of an excitation current. The purpose of this paper is estimate that the effect of the overvoltage results from this phenomenon on insulation performance of short-circuit transformer.

• Journal of Korea Multimedia Society
• /
• v.8 no.12
• /
• pp.1581-1588
• /
• 2005

The primary goal of this paper is to facilitate the rate-distortion control in compressed domain, without introducing a full decoding and re-encoding system in pixel domain. For this aim, the error propagation behavior over several frame-sequences due to DCT coefficients-drop is investigated on the basis of statistical and empirical properties. Then, such properties are used to develop a simple estimation model for the CD distortion accounting for the characteristics of the underlying coded-frame. Experimental results show that the proposed model allows us to effectively control rate-distortions into coded-frames over different kinds of video sequences.

• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.102-107
• /
• 2010

This paper presented a rate-distortion estimation method for effective mode decision in H.264/AVC. In this approach, in order to decide a mode, laplacian distribution modeling of DCT coefficients is utilized, which do not need to such process as quantization, entropy coding. From the simulation results, proposed a method showed that rate-distortion between proposed scheme and practical value was almost the same and performed 0.02dB of PSNR gain.