• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.315-322
• /
• 2002

In this paper, a new temporal decomposition method is proposed. which takes into consideration not only spectral distortion but also bit rates. The interpolation functions, which are one of necessary parameters for temporal decomposition, are obtained from the training speech corpus. Since the interval between the two targets uniquely defines the interpolation function, the interpolation can be represented without additional information. The locations of the targets are determined by minimizing the bit rates while the maximum spectral distortion maintains below a given threshold. The proposed method has been applied to compressing the LSP coefficients which are widely used as a spectral parameter. The results of the simulation show that an average spectral distortion of about 1.4 dB can be achieved at an average bit rate of about 8 bits/Frame.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.165-173
• /
• 2004

H.264 is the newest international video coding standard that provides high coding efficiency. A macroblock in H.264 has 7 different motion-compensation block sizes in the Inter mode, and several different prediction directions in the Intra mode. In order to achieve as highest coding efficiency as possible, H.264 reference model employs complex mode decision technique based on rate-distortion (RD) optimization which requires high computational complexity. In this paper, we propose two techniques -'early SKIP mode decision' and 'selective intra mode decision' - which can further reduce the computational complexity. Simulation results show that without considerable performance degradation, the proposed methods reduce encoding time by 30% on average and save the number of computing rate-distortion cost by 72%.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.103-107
• /
• 2009

Because individual HRTFs (Head-Related Transfer Functions) vary from a person to a person, a HRTF database has been measured by researchers to investigate the inter-subject variation, and to generate high fidelity virtual sound image. Individual HRTFs not only vary between subjects but also vary due to wearing clothes and glasses in daily life. However, influence of different dressing condition on the measured HRTF was not sufficiently investigated. To quantify the effect of wearing clothes and glasses, dummy's HRTF is measured in an anechoic chamber with various dressing condition, and is evaluated in the sense of spectral distortion. HRTFs are measured both in the median plane and in the horizontal plane. In the median plane, under 6kHz, effect of different wearing clothes and glasses is negligible. Over 6kHz, however, effect of clothing distorts HRTF about 6dB in the sense of spectral distortion. Moreover, at high frequencies, effect of glasses is no longer negligible. In the horizontal plane, at some azimuths, even additional light cloth over the dummy can change the spectrum of HRTF (6dB spectral distortion) especially when sound source is at contralateral positions. Therefore, HRTF measurement with different wearing conditions can broaden the capability of HRTF customization whose technique utilizes a HRTF database.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.1
• /
• pp.93-100
• /
• 2008

There are two ways of conventional thermal distortion analysis. One is the thermal elasto-plastic analysis and the other is the equivalent forces method based on inherent strain. The former needs exorbitant analysis time, while the latter cannot obtain results of stress field and it needs much time consumption with loads modeling on curved plates. Such faults in two methods have made difficulties in thermal distortion analysis of a large structure like ship hull. In order to solve them, new kind of thermal distortion analysis method was developed. We devised that the inherent strains was used as direct input factors in forms of boundary conditions. It was embodied by using thermal expansion coefficient in commercial code. We used the pre-calculated inherent strain as thermal expansion coefficient, and endowed nodes with imaginary temperatures. This method was already adopted at hull block welding distortion analysis which was considered as impossible, and gave productive results such as reduction of work time in the dry dock.

• The KIPS Transactions:PartB
• /
• v.12B no.3 s.99
• /
• pp.283-290
• /
• 2005

The mismatched allocation of watermarking position due to parallel translation, rotation, and scaling distortion is a problem that requires an answer in watermarking. In this paper, we propose a watermarking method robust enough to hold against geometrical distorting using restoration pattern matching. The proposed method defines restoration pattern, then inserts the pattern to a watermark embedded image for distribution. Geometrical distortion is verified by comparing restoration pattern extracted from distributed image and the original restoration pattern inserted to the image. If geometrical distortion is found, inverse transformation is equally performed to synchronize the watermark insertion and extraction position. To evaluate the performance of the proposed method, experiments in translation, rotation, and scaling attack are performed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.55-63
• /
• 2011

Having a wide angle of view, a fisheye lens is useful for obtaining images of the inside wall of a tunnel. A circular fisheye tunnel image can be transformed into a familiar rectangular image by applying the concept of cylindrical projection. This projection transformation causes several types of distortions in the projected image. This paper discusses the distortion on the boundary lines between smoothly curved wall and flat ground. We analyzed the cause of this boundary distortion, developed transformation model, and derived a correction formular. A distortion correction software programmed in Visual C++ applied to projected image. Consequently, boundary-corrected image could be obtained. Research into other distortions of projected image will helpful in obtaining tunnel image that resembles real tunnel from fisheye tunnel image.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.156-166
• /
• 2000

A rate-distortion based segmentation using recursive merging is presented, which considers texture as a homogeneity by adopting the procedure of a generalized texture approximation. The texture in a region is approximated by SA-DCT and a set of two uniform quantizers with fixed step sizes, one for DC and another for AC. Using the approximated texture, we calculated the rate-distortion based cost. The segmentation using recursive merging is performed by using the rate-distortion based cost. Experimental results for 256$\times$256 Lena show that the region-based coding using the proposed segmentation yields the PSNR improvements of 0.8~ 1.0 dB and 1.2~1.5 dB over that using the rate-distortion based segmentation with DC approximation only and JPEG, respectively.

• Journal of Welding and Joining
• /
• v.30 no.5
• /
• pp.51-56
• /
• 2012

The purpose of this study is to evaluate the distortion and the residual stress of GTA tubular welds between tube and head. In order to do it, the heat input model for GTA welding process was first developed by experiment and FE analyses. The welding distortion and the residual stress distribution of the tubular welds according to welding pass and various restraint degrees were evaluated by using FEA with the heat input model. From FEA results, it was found that the residual stress and the radial distortion at the weld toe of tube part decrease with a decrease in the number of welding pass. However, the maximum residual stresses in each direction of tubular welds are almost constant regardless of the external restraint degree. It was mainly due to the high internal restraint of the welds.

• Journal of Fashion Business
• /
• v.17 no.5
• /
• pp.70-83
• /
• 2013

This study aims to analyze the physical distortions of fashion design which appear in the 20th century. People have been expressing the hope and beauty by twisting human body since the beginning of mankind. Each period has been showing different forms according to various social and cultural environments. The exaggerated body distortions from the primitive times to the modern are based on human body proportions. Such distortion is to emphasize the inherent beauty within the human body. However, the distortions of the body after the 20th century have been developed with the advent of surrealism which is not affected by reasons but by imaginations. Generally speaking, the reconstruction of the heterogeneous elements is allowed in art. The unexpected surreal elements are creating formative beauty using by distinctly different technique which is unfamiliar and awkward. Physical distortion creates other beauty that is not uniform and absolute beauty but it pursues the diversity of breaking down into categories. Formativeness of surreal physical distortion fashion has the potential for a variety of clothing design, therefore it has intrinsic values for continuous study.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.268-277
• /
• 2000

Nowadays, the interference between neighbor basestations is getting higher as mobile communication services expand, then the increase of the interference causes IMD(Intermolulation Distortion) problems for not only active devices but also passive devices. In this paper, we have designed and assembled several adapters having variable plating thickness and materials to analyze PIMD(Passive Intermodulation Distortion) mechanisms for coaxial cables which is one of the representative passive RF devices. The measurement results of the assembled adapters show that IM level depends on conductivity of plating materials, plating thickness, device structure, aging effect and so on. Furthermore, we have obtained PIMD mechanisms and some control methods of PIMD from the results.