• Journal of Welding and Joining
• /
• v.30 no.5
• /
• pp.57-63
• /
• 2012

The purpose of this study is to evaluate the welding distortion of the circular type lap joint in STS304L of 0.7mm thickness by using FEA. In order to do it, a heat input model for GTA welding process with non-consumable electrode was established through comparing the molten pool shapes and temperature distributions obtained by both FEA and experiment. With the heat input model, the welding distortion of the circular type lap joint was evaluated by 3-D FEA. From FEA results, it was found that 3-D FEA with proper heat input model can be used for the evaluation of the excessive distortion of the circular type lap joint of STS304L thin plate. In addition, the root cause of the excessive distortion in the weld was also identified as the excessive compressive residual stress in the tangential direction of the weld.

• Journal of Welding and Joining
• /
• v.28 no.1
• /
• pp.54-59
• /
• 2010

Ship Blocks are assembled by welding, and among them, welding between large blocks (Pre-erection stage) is used as feature of butt. In this process, local material has a experience of thermal cycle and become finally shrunk. As for inconsistency of shrunk weldments and adjacent regions, ship structure would be deformed locally and globally. Thermal distortion analyses are done for control of these processes, and methodologies capable of ship block size among them are using 2-D shell element in FEM. A shell element takes charge of plate, so it has its thickness which is important for angular distortion by welding. By the way, a butt-welding consists normally of several passes, and weldment thickness are different at each pass. If a calculated final one-time welding shrinkage is acting on the shell element whose thickness is same as it of plate, then deformation value must be underestimated. This research developed a methodology that total deformation after multi-pass welding can be analyzed by one time at shell element having original thickness of its plate. We use the SDB thermal distortion analysis method and verified by several experiment. The both experimental and analysis results showed good agreements.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2312-2325
• /
• 2013

In this paper, we propose a preprocessing method that it is to correct the distortion of text area in Korean signboard images as a preprocessing step to improve character recognition. Distorted perspective in recognizing of Korean signboard text may cause of the low recognition rate. The proposed method consists of four main steps and eight sub-steps: main step consists of potential vertical components detection, vertical components detection, text-boundary estimation and distortion correction. First, potential vertical line components detection consists of four steps, including edge detection for each connected component, pixel distance normalization in the edge, dominant-point detection in the edge and removal of horizontal components. Second, vertical line components detection is composed of removal of diagonal components and extraction of vertical line components. Third, the outline estimation step is composed of the left and right boundary line detection. Finally, distortion of the text image is corrected by bilinear transformation based on the estimated outline. We compared the changes in recognition rates of OCR before and after applying the proposed algorithm. The recognition rate of the distortion corrected signboard images is 29.63% and 21.9% higher at the character and the text unit than those of the original images.

• The Research Journal of the Costume Culture
• /
• v.25 no.6
• /
• pp.757-772
• /
• 2017

Appearance management is a serious issue for adults and young people in Korean society. People of various ages have used diverse means to improve their appearances. This study focused on dieting as an appearance management behavior in female adolescents. Dieting behaviors are not just a means to improve appearance; they may also relate to individuals' beliefs and self-control. The importance of individual psychological/personality factors cannot, therefore, be ruled out. Such factors can help explain personality factors explain "what causes a compulsive diet and what factors can alleviate it". This study reviewed the literature on perfectionism and self-control as individual personality factors, and empirically examined the effects of these variables on perceived body distortion and dieting behaviors. We performed a structural equation model analysis to verify our hypothesis. The results are as follows: we found perfectionism to be positively related to perceived body distortion and dieting behaviors; we also found self-control to be negatively related to perceived body distortion though unrelated to dieting behaviors; finally, our analysis identified a relationship between perceived body distortion and dieting behaviors. These results indicate that perfectionism and self-control should be considered when conducting guidance and counseling sessions on issues related to dieting behaviors for adolescent' appearance management. This paper concludes by discussing the study's implications and limitations.

• Journal of Welding and Joining
• /
• v.29 no.4
• /
• pp.48-53
• /
• 2011

A thermal distortion analysis which takes strains directly as boundary conditions removed barrier of analysis time for the evaluation of welding distortion in a large shell structure like ship block. If the FE analysis time is dramatically reduced, the structure modeling time or the input-value calculating time will become a new issue. On the contrary to this, if the calculation time of analysis input-value is dramatically reduced and its results also are more meaningful, a little longer analysis time could be affirmative. In this study, instead of using inherent strain based on elastic analysis, a thermal strain based on elasto-plastic analysis is used as the boundary condition of weldments in order to evaluate the welding distortion. Here, the thermal strain at the weldment was established by using a stress-strain curve established from the test results. It is possible to automatically recognize the modeling induced-stiffness in the shrinkage direction of welded or heated region. The validity of elasto-plastic thermal distortion analysis was verified through the experiment results with various welding sequence.

• The Journal of Korean Academy of Prosthodontics
• /
• v.24 no.1
• /
• pp.73-83
• /
• 1986

The purpose of this study was to evaluate the distortion of 6-unit etched bridge during the firing cycle. Thirty frameworks were constructed. Twenty of the frameworks received a normal application of porcelain and firing sequence ; ten served as controls and subjected to the same firing sequence without the porcelain application. The results were as follows ; 1. Distortion did occur in the body of curved, long-span etched bridge frameworks during the porcelain firing cycle. 2. This distortion was a result of changes in the metal as well as the contraction of fired porcelain. 3. The greatest distortional changes occurred during the degassing stage and final glaze stage of the porcelain firing cycle. 4. Distortion incurred by the application and firing of the porcelain was reversible. When the porcelain was chemically removed from the frameworks, there was an elastic rebound. 5. Distortion was clinically important.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.807-817
• /
• 2016

A novel fast algorithm is suggested for a coding unit (CU) mode decision using pseudo rate-distortion based on a separated encoding structure in High Efficiency Video Coding (HEVC). A conventional HEVC encoder requires a large computational time for a CU mode prediction because prediction and transformation procedures are applied to obtain a rate-distortion cost. Hence, for the practical application of HEVC encoding, it is necessary to significantly reduce the computational time of CU mode prediction. As described in this paper, under the proposed separated encoder structure, it is possible to decide the CU prediction mode without a full processing of the prediction and transformation to obtain a rate-distortion cost based on a suitable condition. Furthermore, to construct a suitable condition to improve the encoding speed, we employ a pseudo rate-distortion estimation based on a Hadamard transformation and a simple quantization. The experimental results show that the proposed method achieves a 38.68% reduction in the total encoding time with a similar coding performance to that of the HEVC reference model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1C
• /
• pp.34-44
• /
• 2008

In this paper, a new rate-distortion estimation method is proposed for fast rate-distortion optimized(RDO) mode decision in H.264 encoder. A bit-rate and distortion should be calculated by encoding and reconstruction of each macroblock mode in order to select the optimal RDO mode. To reduce the computations for getting them, a bit-rate and distortion is efficiently estimated in DCT domain. Simulation results show that the proposed method achieves computational saving about 81% of RDO mode decision and saves about 26% of total encoding time without noticeable degradation in coding performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1C
• /
• pp.56-62
• /
• 2009

In H.264/AVC, rate distortion optimization algorithm is used to decide the best block mode from various block modes. It improves a bit rate but greatly increases an amount of computation. This paper proposes a fast rate distortion optimization algorithm that omits a rate distortion optimization adaptively by predicting its cost from the cost calculated for motion estimation. The simulation results show that the proposed algorithm, on average, keeps nearly the image quality and the bit rate made by the rate distortion optimization while reduces 69.86% and 69.63% of computation added by it in CIF and QCIF respectively.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.2923-2925
• /
• 1999

The objective of camera calibration is to determine the internal optical characteristics of camera and 3D position and orientation of camera with respect to the real world. Calibration procedure applicable to general purpose cameras and lenses. The general method to revise the accuracy rate of calibration is using mathematical distortion of lens. The effective og calibration show big difference in proportion to distortion of camera lens. In this paper, we propose the method which calibration distortion model by using neural network. The neural network model implicity contains all the distortion model. We can predict the high accuracy of calibration method proposed in this paper. Neural network can set properly the distortion model which has difficulty to estimate exactly in general method. The performance of the proposed neural network approach is compared with the well-known Tsai's two stage method in terms of calibration errors. The results show that the proposed approach gives much more stable and acceptabke calibration error over Tsai's two stage method regardless of camera resolution and camera angle.