• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.82-86
• /
• 1990

A camera type optical bench system equipped with a lens collimator and an image analyzer is fabricated to measure the equivalent focal length and distortion of lenses. This system is automatized by the computer which controls stepping motors. A nodal slide optical bench system equipped with an off axis reflective collimator is fabricated and improved by using rotating arms and air bearing system. distortion measurement on a wide angle lens using the camera method and the nodal slide method is reported. Defocusing error in the distortion measurement with the nodal slide optical bench is analyzed and improved by iteration method to search the correct image point.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.280-282
• /
• 2006

Prediction and control of the thermal distortion is particularly important for the design and manufacture of welded thin plate panel. In this study, experiments and computations are peformed to analyze how hole configuration and the size of the specimen effect on distortion. In addition, this study aims to develop a thermal elasto-plastic simulation using finite element method to predict distortion, with particular emphasis on buckling deformation generated in attachments welded around hole.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.4
• /
• pp.205-211
• /
• 2014

This paper reports an efficient algorithm for accurate rolling shutter distortion removal. A hierarchical global motion estimation approach for a group of blocks reduces the level of computation by three orders of magnitude. In addition, the motion of each scanline is determined accurately by averaging two candidates obtained through cubic spline interpolation. The experimental results show that the proposed method produces accurate motion information with significant computation reduction and corrects the rolling shutter distortion effectively.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.7
• /
• pp.389-396
• /
• 2004

This paper introduces a new algorithm to calculate distortion power using complex THD(Total Harmonic Distortion) index. The proposed algorithm involves FFT(Fast Fourier Transform) to compute real and imaginary THDs of voltage and current. Case studies are presented to show the availability of the proposed method.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.234-236
• /
• 2004

The purpose of this study is to establish the predictive equation of welding distortion at the thick AA5083 alloy weldment. In order to do it, the extensive FE analysis was peformed to identify the principal factor controlling welding distortion. Based on the results, the predictive equations of transverse shrinkage and angular distortion at the thick AA5083 alloy weldment were formulated as the function of heat intensity (Q), in-plane(Di) and bending(Db) rigidity.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.1E
• /
• pp.16-22
• /
• 2009

In this paper, the new robust active noise controller was proposed to be applied for attenuating the noises when the nonlinear distortion in the secondary path exists. Through computer simulations as well as the analytical analysis, it could be shown that it is possible for both conventional LMS controller and proposed controller, to be applied for actively controlling the noises and linearizing the nonlinear distortion in the secondary path. Also, the simulations results demonstrated that the proposed controller may have faster convergence speed and better capability of controlling the noises and compensating the nonlinear distortion than the conventional LMS controller.

• International Journal of Ocean System Engineering
• /
• v.3 no.2
• /
• pp.95-101
• /
• 2013

This study is mainly interested in roundness of a circular moonpool structure in FPSO. Because this structure needs abrasion-resistance on inner wall, we should do buttering widely and deeply by using Inconel. But a general buttering can cause a severe distortion at structures. If someone can analyze the roundness by thermal distortion under Inconel over-lay, an erection policy can be established. In this study, shrinkage methodology by designed stress-strain curve was used and the result allowed deciding an appropriate block size.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.201-204
• /
• 2008

In this paper a new steganographic method is presented with minimum distortion. This paper focused on DCT rounding error and optimized that in a very easy way, resulting stego image has less distortion than other existing methods. The proposed method compared with F5 steganography algorithm, and the proposed method achieved better performance. This paper considered the DCT rounding error for lower distortion with possibly higher embedding capacity.

• The KIPS Transactions:PartB
• /
• v.10B no.4
• /
• pp.373-380
• /
• 2003

Most of low cost digital cameras reveal relatively high lens distortion. The purpose of this research is to compensate the degradation of image quality due to the geometrical distortion of a lens system. The proposed method consists of two stages : calculation of a lens distortion coefficient by a simplified version of Tsai´s camera calibration and subsequent image warping of the original distorted image to remove geometrical distortion based on the calculated lens distortion coefficient. In the lens distortion coefficient calculation stage, a practical method for handling scale factor ratio and image center is proposed, after which its feasibility is shown by measuring the performance of distortion correction using a quantitative image quality measure. On the other hand, in order to apply image warping via inverse spatial mapping using the result of the lens distortion coefficient calculation stage, a cubic polynomial derived from an adopted radial distortion lens model must be solved. In this paper, for the purpose of real-time operation, which is essential for embedding into an information device, an approximated solution to the cubic polynomial is proposed in the form of a solution to a quadratic equation. In the experiment, potential for real-time implementation and equivalence in performance as compared with that from cubic polynomial solution are shown.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.3
• /
• pp.74-80
• /
• 2012

In resolution-constrained quantization, the size of Voronoi cell varies depending on probability density function of the input data, which causes large amount of distortion outliers. We propose a vector quantization method that reduces distortion outliers by combining the generalized Lloyd algorithm (GLA) and the cell-size constrained vector quantization (CCVQ) scheme. The training data are divided into the inside and outside regions according to the size of Voronoi cell, and consequently CCVQ and GLA are applied to each region, respectively. As CCVQ is applied to the densely populated region of the source instead of GLA, the number of centroids for the outside region can be increased such that distortion outliers can be decreased. In real-world environment, source mismatch between training and test data is inevitable. For the source mismatch case, the proposed algorithm improves performance in terms of average distortion and distortion outliers.