• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.16-23
• /
• 2014

A novel poly(AM-DMDAAC)/MMT superabsorbent nanocomposites are prepared by radical polymerization using ammonium persulfate (APS) and anhydrous sodium sulfite as a free radical initiator and N,N-methylene bisacrylamide (MBA) as a crosslinker. In this paper, an optimization study on the synthesis of superabsorbent nanocomposites is carried out. Orthogonal array experiment indicates that the optimized conditions is acrylamide (AM) content 23 wt%, diallyl dimethyl ammonium chloride (DMDAAAC) content 6 wt%, montmorillonite (MMT) content 4 wt%, initiator content 0.2 wt% and crosslinker content 0.02 wt%. Under the optimization syntheses conditions concluded, the maximum water absorbency in distilled water is $659.53g{\cdot}g^{-1}$ and in 2 wt% sodium chloride solution is $116.25g{\cdot}g^{-1}$. Compared with the range values of different factors ($R_j$), the order of significance factors in distilled water is C (MMT) > B (DMDAAC) > A (AM) > D (crosslinker) > E (initiator). MMT is intercalated during polymerization reaction and a nanocomposite structure is formed as shown by TEM analysis and XRD analysis.

• Nuclear Engineering and Technology
• /
• v.7 no.3
• /
• pp.213-222
• /
• 1975

Immobilization of the second-cycle radioactive liquid wastes from a Purex process was developed with the blown asphalt (manufactured by Kukdong Shell Oil Company Ltd) to eliminate the possibility that the radioactive materials will be redispersed into the environment. Attempts to incorporate these wastes directly into the asphalt martrices without any pretreatment were not successful, as it was observed that the sulphuric acid in the waste oxidised the asphalt. Hence, the waste was treated with caustic soda and made alkaline prior to bituminization, so that it was found that this pretreatment made the waste compatible to the asphalt matrices. The pure blown asphalt samples irradiated with doses of 4.0$\times$10$^{7}$ rad showed no evidence of volume increase. The suitable temperature for incorporation of the alkaline wastes into blown asphalt was 180-20$0^{\circ}C$. The Products containing 50 wt% salts represented the following good properties viz., volume reduction (about 1.4), homogeneity, teachability etc. During the period of 131 day $s^{l37}$Cs from products containing 40wt% salts was leached at rates ranging from 2.70$\times$10-4 to 8.27$\times$10-4g/cm2_day but the rate for $^{90}$ Sr was lower by one to two orders of magnitude by distilled water. The leaching rates for $^{137}$ Cs and $^{90}$ Sr by sea water were slightly lower than by distilled water. Both of the leaching rates decreased with increasing pH.H.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.1
• /
• pp.56-63
• /
• 2003

The dough fermentation and the quality of bread prepared with different kinds of water such as distilled water, tap water and diluted hot spring water(SW) from Gyungsan Sipan hot spring were investigated. Content of total soluble solid in the hot spring water was 8,765 ppm and contents of Na, Ca, Mg and K as major elements was 2,296, 287, 65 and 8 ppm, respectively. Content of Fe, Cu, Co, F, Zn, Al, S, Mo, Se and Si as minor elements was in the range of 0.002~5.2 ppm. The pH(6.95~7.68) of the dough prepared with diluted hot spring water(I, 55 times; II, 4 times; III, 2 times) was higher than that of distilled water. The dough volume after the 1st fermentation was expecially lower in the III, but the volume of the dough prepared with III adjusted pH to 5.5 was higher than that of the control. The hardness and the strength were higher than those of the control, but the scores were love. than those of the control in case of pH adjustment(pH 5.5). The cohesiveness was also lower than that of the control in the bread with diluted hot spring water. Softness and stickiness of the bread(III) were hisher than those of the control. But overall acceptability was the highest in the II.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.283-299
• /
• 2017

The leakage of tunnel causes the long-term durability of the structures such as concrete lining to deteriorate. The cause of durability degradation can be various substances contained in groundwater such as chloride, sulphate, water, and gas. In this study, a series of test were carried out to determine the watertightness performance and the resistance to salt water of the spray-applied membrane used as non-structural rock support or as a waterproof material for tunnels. As a result, it was found that the penetration of water could occur in a specimen, and the reason was that the internal pores generated by the mixing of the liquid polymer and the powder material and the internal pores were connected by the water pressure. The tensile strength of the test specimens immersed in distilled water and saline water was found to be reduced to less than half of the tensile strength in normal condition. In addition, The elongation was measured to be higher in distilled water than in salt water. However, this result will require further investigation.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.109-115
• /
• 2002

Mycelial growth of L. edodes by pretreatments of softwood was studied on a sawdust medium. The sawdust used was from the following softwood species : Larix leptolepis, Pinus densiflora and Pinus koraiensis. The pretreatment consisted of cold-water (48 h), hot-water (3 h) and steam extractions (3 h) at a ratio of 500 g : 3,000 mL (sawdust : distilled water). The sawdust medium was a mixture of 76% sawdust, 20% rice bran, 3% glucose, 0.4% potassium nitrate and 0.6% calcium carbonate. Following sawdust pretreatments proved most suitable : L. leptolepis (steam extraction), P. densiflora (hot-water extraction) and P. koraiensis (hot-water extraction). Mycelial growth on P. koraiensis sawdust increased in proportion to an increase in hot-water extraction time. Mycelial growth was optimum on the sawdust extracted for 12 hours, hot-water extraction beyond this period proved unsuitable. With the exception of P. densiflora at 100 ㎍/mL, antifungal activity occurred in every sample. Maximum inhibition of mycelial growth was obtained from following concentration of hot-water extractives : P. densiflora (10⁴ ㎍/mL) and P. koraiensis (10⁴ ㎍/mL). This study has provided useful preliminary information for the cultivation of L. edodes.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.299-308
• /
• 2016

This paper presents an investigation of the mechanical and microstructural properties on hardened samples that were synthesized using blended binder(fly ash(FA) and blast furnace slag cement(BFSC)), alkali activator and sea water or distilled water. Binders were prepared by mixing the FA and BFSC in different blend weight ratios of 6:4, 7:3 and 8:2. Sodium hydroxide and sodium silicate were used 5 wt% of binder, respectively, as an alkaline activator. The compressive strength and absorption were measured at the age of 3, 7 and 28 days, and the XRD, TGA and MIP tests were performed at the age of 28 days. An increase in the content of BFSC leads to an increase in the quantities of ettringite and C-S-H formed, regardless of the type of mixing water. And it also shows higher strength due to the reduction of pores larger than ~50 nm. All hardened samples in this study have common hydration products of C-S-H, $Ca(OH)_2$ and calcite. Hydrocalumite of all reaction products formed was only present in hardened sample mixed with sea water. For each FA/BFSC mixing ratio, the compressive strength of hardened sample mixed with sea water was similar to that mixed with distilled water. It is proposed that the slight increase of strength of samples mixed with sea water is mainly due to the presence of hydrocalumite phase containing chlorine ion, contributing to the change of total porosity and pore size distribution in samples.

• IMMUNE NETWORK
• /
• v.1 no.1
• /
• pp.32-35
• /
• 2001

Background: rhGM-CSF has been shown to enhance the migration and proliferation of endothelial cells and to promote keratinocyte growth. This study was tried to evaluate the effect of rhGM-CSF dressing on the uninfected wounds. Methods: Thirty Sprague-dawley white mice(250-300g) were selected in this study. The number of wound with the diameter of 5 mm, was 3 in left and 3 in right at the symmetric sites, respectively. The site of rhGM-CSF dressing was decided by a randomization. rhGM-CSF($Leucogen^{(R)}$) was diluted in the distilled water($5{\mu}g/mL$). The experimental wound group was dressed by l mL of distilled water mixed with rhGM-CSF and control wound group was dressed by l mL of distilled water. The dressing was done, every 24 hours. The criteria of comparison were the duration of wound healing duration, histologic findings and the bacterial culture of wound sites. Results: The duration of wound healing was $10.3{\pm}1.7days$ in experimental group and $10.2{\pm}2.8days$ in control group, without significant difference. There was no specific difference of histologic findings between both groups. The pathogen was not found, at all. Conclusion: It seems to be that rhGM-CSF has no prominent effect on the uninfected wound healing in the mice without immune suppression.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.441-447
• /
• 2002

The bleaching of discolored nonvital teeth is conservative treatment that satisfy the cosmetic desire. The most common method for this treatment, walking bleaching, is using 30% hydrogen peroxide and sodium perborate. Many alternatives are suggested for preventing the external cervical root resorption that is the common complication of the nonvital teeth bleaching with 30% hydrogen peroxide The same extent of oxidation reactions as that resulted by the bleaching with the application of 30% hydrogen peroxide and sodium perborate can also be acquired more safely by materials that contain 10% carbamide peroxide, used primarily for the bleaching of vital teeth. Therefore, this study was performed to evaluate the efficacy of 10% and 15% carbamide peroxide bleaching gel in nonvatal teeth bleaching. The internal bleaching of intentionally discolored teeth was performed in vitro with 10% carbamide peroxide (Group 1), 15% carbamide peroxide (Group 2), mixture of distilled water and sodium perborate (Group 3), and mixture of 30% hydrogen peroxide and sodium perborate (Group 4). The bleaching materials were refreshed following 3, 6, 9 and 12 days. To evaluate the bleaching effect, the color change of the crowns was measured at 1, 2, 3, 4, 7 and 15 days of bleaching using the colorimeter. The results were as follows：1. L$^*$ and $\Delta$E$^*$ values were increased with time in all bleaching agents (p<0.01). 2. There was no significant difference in L$^*$ and $\Delta$E$^*$ value among bleaching agents. 3. $\Delta$E$^*$ value higher than 3 was shown after 3 days of bleaching with 10% carbamide peroxide gel, 1 day with 15% carbamide poroxide gel, 4 days with mixture sodium perborate and distilled water and 4 days with mixture sodium perborate and 30% hydrogen peroride, respectively. These results revealed that the use of 10% and 15% carbamide peroxide bleaching gel in non-vital teeth bleaching is as effective as mixture of distilled water and sodium perborate and mixture of 30% hydrogen peroxide and sodium perborate. Accordingly, carbamide peroxide could be used clinically to bleach discolored non-vital teeth.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.276-286
• /
• 2013

The goal of this study was to investigate change of thermal decomposition feature of miscanthus (Miscanthus sacchariflorus) after removal of inorganic constituents using distilled water (D.I-w; 30, 60 and $90^{\circ}C$). The carbon content was increased whereas the oxygen content was decreased with the temperature of D.I-w treatment. Moreover, ash content was slightly decreased from 4.6% of control to 3.2% of $90^{\circ}C$ D.I-w treated sample. Results of total monomeric sugar contents and X-ray diffraction (XRD) analysis showed that structural changes of cellulose/hemicellulose regions did not occurr during D.I-w treatment. Results of inductively coupled plasma emission spectrometer (ICP-ES) showed that miscanthus has the largest amount of inorganic constituents such as potassium (5,644 ppm), phosphorus (3,995 ppm), magnesium (1,403 ppm) and calcium (711 ppm). Thermogravimetric analysis (TGA) confirmed that the yield of char slightly decreased whereas the yield of volatiles increased with increasing D.I-w treatment temperature. In addition, differential thermogravimetric analysis (DTGA) indicated that the maximum decomposition rate ($V_M$) and temperature ($T_M$) corresponding to VM were varied from $0.82%/^{\circ}C$, $360.60^{\circ}C$ of control to $1.17%/^{\circ}C$, $362.62^{\circ}C$ of $90^{\circ}C$-D.I-w treated sample.

• Korean Journal of Food Science and Technology
• /
• v.39 no.3
• /
• pp.289-294
• /
• 2007

This study was performed to investigate the effects of pre-soaking methods on the preparation of Rehmannia radix Preparata (R.P). The R. radix L (R.L) was soaked in distilled water and traditional Korean wine for 24 hr, then the soaked R.L was treated with a traditional nine-time steaming process. Next, catalpol, 5-hydroxymethyl-2-furaldehyde (5-HMF), polyphenols, flavonoids, antioxidant activities, and ACE inhibition activity were analyzed for the R.P produced by the different methods. The catalpol content of the R.L was 631.4 ppm, but the content decreased as steaming increased to 8-9 times. The 5-HMF, polyphenol, and flavonoid contents of the R.L were 0.12 mg/g, 5.09 mg/g, and 0.83 mg/g, respectively, and these increased gradually with increasing steaming times. As the steaming times of the distilled soaking water increased, the antioxidant activities of 1 mg/mL increased from 19.44% to 75.60% at 14 times of steaming. The ACE inhibition activities of 1 mg/mL of the distilled soaking water increased from 28.70% to 94.78% at 10 times of steaming, but decreased afterward.