• 한국환경보건학회지
• /
• 제46권3호
• /
• pp.324-334
• /
• 2020

Objectives: This study was conducted to estimate the related health risk by investigating the content of biogenic amines (BAs) in commercial fermented alcoholic beverages. Methods: Ninety-seven samples, including takjus (34), fruit wines (26), distilled liquors (20) and beers (17) were purchased in Gangwon-do (Province) in 2019. The eight BAs (putrescine, cadaverine, spermine, spermidine, tyramine, β-phenylethylamine, histamine, and tryptamine) were analyzed by high performance liquid chromatograph (HPLC) after extraction (0.4 M HClO₄), pigment removal (carbon cartridge) and derivatization (1% dansylchloride). The health risk of exposure to BAs due to ingestion of commercial fermented alcoholic beverages was estimated as the margin of exposure (MOE). Results: Various BAs were detected in takju, fruit wine, distilled liquor and beer. Putrescine (not detected (ND)-12.60 mg/L), cadaverine (ND-5.45 mg/L), tyramine (ND-8.34 mg/L), β-phenylethylamine (ND-13.73 mg/L), histamine (ND-7.96 mg/L), and tryptamine (ND-19.00 mg/L) were found in takju. Putrescine (ND-15.34 mg/L), cadaverine (ND-7.90 mg/L), β-phenylethylamine (ND-3.06 mg/L), histamine (ND-9.68 mg/L), and tryptamine (ND-14.06 mg/L) were identified in fruit wine. Putrescine (less than limit of detection (

• 한국환경기술학회지
• /
• 제19권6호
• /
• pp.493-502
• /
• 2018

수계의 조류발생 원인물질인 질소와 인을 제거할 목적으로 수처리용 EM 담체를 개발한 후, 물리적 특성에 대하여 검토한 결과는 다음과 같다. EM 담체를 제조하기 위한 점토 : 제올라이트 : 질석 : 활성탄의 배합비율은 10 : 2.5 : 0.1 : 2, 소성온도는 $700^{\circ}C$가 적합하였다. EM 담체의 공극률과 밀도는 39.98 %와 $1.13kg/m^3$, 질소와 인의 흡착효율은 69.3 %와 38.9 %, 증류수 담체의 공극률과 밀도는 37.80 %와 $1.11kg/m^3$, 질소와 인의 흡착효율은 62.5 %와 37.8 %로 나타났다. EM 담체가 증류수 담체에 비하여 질소의 흡착효율은 6.8 %, 인의 흡착효율은 1.1 %가 크게 나타났다. 담체의 질소와 인에 대한 흡착특성은 Freudlich 흡착등온식으로 표현이 가능하였다. 소성시간의 변화는 EM 담체를 성형할 때 질소의 인의 흡착효율에는 큰 영향을 미치지 못하였으나 담체의 강도에는 영향을 미칠 것으로 판단된다. 질소의 제거효율은 소성시간 4시간, 인의 제거효율은 소성시간 3시간에서 가장 우수하였다.

• 한국식품영양과학회지
• /
• 제33권2호
• /
• pp.249-254
• /
• 2004

MM에 여러 가지 버섯균을 7일 동안 액체배양하고 균사를 제거한 배양물에 대한 항산화성에 관한 연구를 수행하였다. 시료(1 mg)를 275 $\mu$mol linoleic acid가 함유된 배양액에첨 가하고 shaking incubator(200 rpm, 4$0^{\circ}C$)에 16일 동안 배양하면서 생성된 POV와 MA의 함량의 조사하였다. 이 결과를 BM에 서 배양한 버섯균사체배양물과 BMM 자체의 POV 및 MA 생성 결과와 비교하였다. AB-BMM과 HE-BMM의 항산화능이 다른 버섯균사체 배양물이나 BMM보다 우수하였다. 따라서 이 연구결과는 뽕나무는 버섯균사체액체배양물의 항산화성을 증가시켰고, AB -BMM 및 HE-BMM은 항산화물로 활용할 수 있음을 의미한다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2018년도 춘계학술발표회
• /
• pp.45-45
• /
• 2018

We had already reported the successful germination for green pods of purple lady's slipper orchid (Cypripedium macranthos Sw.). The green pod methods is to take immature seeds in green capsules, sterilize the capsule, and take out the sterile seeds. This method, however, needs very critical time of harvest. The critical time of seed harvest changes depending upon the species, condition of the specimen, and climatic influence, and the right time lies between 5 and 12 weeks after fertilization. In this study, the mature seeds were collected after 120-130 days with hand-polination of lady's slipper orchids. Mature seeds are usually dormant and it has to be overcome, either with hormone or storing the seeds near freezing for two or three months to break dormancy. The seeds were first surface sterilized with 70% ethanol and then transferred 1% NaOCl for 10-15 minutes, followed by rinses 3 times with sterilized distilled water. The cypripedium seeds consists of an embryo within a seed coat known as a testa. The testa is water repellent and the seed has a large air space between the embryo and testa so the seed tends to float on water. We had resolved the problems with vacuum pump to soak water into the testa before sterilization. The seeds were placed on liquid or agar solidified germination media. Cultures were incubated at $24{\pm}1^{\circ}C$ in dark. The seeds were germinated in 6-8 weeks in liquid suspension culture (germination percentage over 18%); however, the seeds on agar solidified media took more than 5 months to germinate and the germination percentage less than 5%. The most effective media for liquid culture was 1/4 strength Murashige and Skoog (MS) medium with 50 ml/l coconut water ($4brix^{\circ}$) at pH 5.8.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제25권4호
• /
• pp.304-310
• /
• 1999

This study was designed to find the effect of Minocycline loaded microcapsule applied locally to tissue by measuring drug concentration in tissue and serum by HPLC and to achieve optimal drug delivery system and duration to a specific target site. Control group were administrated minocycline intramuscularly twice a day with $0.2{\mu}g/100g$ for 1 to 10 days. In experimental group, surgical wound was created on Rt. cheek and then minocycline loaded microcapsule was applied into the space between superficial and deep layer of masseter muscle. Animals were sacrificed at 1, 3, 5, 7, 10 days after initial administration, blood was obtained from heart and right masseter muscle was excised. Blood sample was centrifuged at 3000rpm for 15min. Tissue sample was homogenized, left at room temperature for 48hr and centrifuged at 4000g for 5min. Supernatant was completely dried and dissolved in distilled water. Analysis was conducted using a ${\mu}Bondapack$ C18 column. The mobile phase was 0.2M Ammonium Oxalate/0.1M EDTA/DMF=11/4/5 solution, which was injected into the column and detected with photodiode detector at 344nm wavelength. The results were as follows : 1. This method was reliable, could be replicated and suitable for minocycline analysis in tissue as well as serum. 2. In tissue, concentration of minocycline of experimental group was higher than that of control group for 5days. 3. Except 1 day, concentration of minocycline in serum of experimental group was lower than that of control group. 4. Concentration of minocycline in tissue was much higher than that in serum. From these results, minocycline loaded microcapsule might be effective tool for local drug delivery system might be useful for treatment of infections of oral and maxillofacial region and management of infected surgical wound, minimizing systemic effects.

• 한국수정란이식학회지
• /
• 제23권4호
• /
• pp.239-243
• /
• 2008

This study was conducted to investigate the effects of type of the sugar supplemented to the extender on the vigor, viability and intact acrosomal rates of frozen-thawed dog spermatozoa. The ejaculated semen was diluted with TRIS-citric acid extender containing 200mM TRIS, 73mM citric acid, 6% (v/v) glycerol, 20% (v/v) egg yolk, 1% (v/v) antibiotics (streptomycin/penicillin), 44 mM sugar, which was either glucose, fructose or glucose-fructose combination, and distilled water to make the final volume of 100ml. Extended semen samples were cooled at $4^{\circ}C$ for an hour, packaged in 0.25ml straws, equilibrated for 10 minutes in liquid nitrogen vapor, and frozen in liquid nitrogen. Samples were thawed by placing straws into $37^{\circ}C$ water for 120 seconds. After thawing, vigor, viability and intact acrosomal rates of frozen-thawed semen were compared according to type of sugar. No significant differences were observed between glucose and fructose groups. In addition, combination of the 2 sugars also did not show any significant differences in the vigor, viability and intact acrosomal rates. In conclusion, glucose and fructose were equally efficient as sugar supplements for freezing extender.

• 동력기계공학회지
• /
• 제10권2호
• /
• pp.47-53
• /
• 2006

This study concerns the performance of condensation heat transfer in plain and grooved thermosyphons. Distilled water, methanol, ethanol have been used as the working fluids. In the present work, a copper tube of the length of 1200mm and 14.28mm of inside diameter is used as the container of the thermosyphon. Each of the evaporator and the condenser section has a length of 550mm, while the remaining part of the thermosyphon tube is adiabatic section. A study was carried out with the characteristics of heat transfer of the thermosyphon 50, 60, 70, 80, 90 helical grooves in which boiling and condensation occur. The liquid filling as the ratio of working fluid volume to total volume of thermosyphon, the kinds of working fluid, the inclination angle, grooves and operating temperature have been used as the experimental parameters. The experimental results show that the number of grooves, the amount of the working fluid, the kind of working fluid, angle of inclination angle are very important factors for the operation of thermosyphon. The maximum heat transfer was obtained when the liquid fill was about 20 to 25 % of the thermosyphon volume. The relatively high rates of heat transfer have been achieved in the thermosyphon with grooves. The helical grooved thermosyphon having 70 to 80 grooves in water, 60 to 70 grooves in methanol and 70 to 80 grooves in ethanol shows the best heat transfer coefficient in both condensation.

• The Journal of Advanced Prosthodontics
• /
• 제8권6호
• /
• pp.417-422
• /
• 2016

PURPOSE. The purposes of this study were to evaluate the staining resistance of CAD/CAM resin-ceramics polished with different techniques and to determine the effectiveness of the polishing techniques on resin-ceramics, comparing it with that of a glazed glass-ceramic. MATERIALS AND METHODS. Four different CAD/CAM ceramics (feldspathic ceramic: C-CEREC Blocs, (SIRONA) and three resin-ceramics: L-Lava Ultimate, (3M ESPE), E-Enamic, (VITA) and CS-CeraSmart, (GC)) and one light cure composite resin: ME-Clearfil Majesty Esthetic (Kuraray) were used. Only C samples were glazed (gl). Other restorations were divided into four groups according to the polishing technique: nonpolished control group (c), a group polished with light cure liquid polish (Biscover LV BISCO) (bb), a group polished with ceramic polishing kit (Diapol, EVE) (cd), and a group polished with composite polishing kit (Clearfil Twist Dia, Kuraray) (kc). Glazed C samples and the polished samples were further divided into four subgroups and immersed into different solutions: distilled water, tea, coffee, and fermented black carrot juice. Eight samples ($8{\times}8{\times}1mm$) were prepared for each subgroup. According to CIELab system, four color measurements were made: before immersion, immersion after 1 day, after 1 week, and after 1 month. Data were analyzed with repeated measures of ANOVA (${\alpha}=.05$). RESULTS. The highest staining resistance was found in gl samples. There was no difference among gl, kc and cd (P>.05). Staining resistance of gl was significantly higher than that of bb (P<.05). Staining resistances of E and CS were significantly higher than those of L and ME (P<.05). CONCLUSION. Ceramic and composite polishing kits can be used for resin ceramics as a counterpart of glazing procedure used for full ceramic materials. Liquid polish has limited indications for resin ceramics.

• 한방재활의학과학회지
• /
• 제30권2호
• /
• pp.67-75
• /
• 2020

Objectives SJ004 is a natural herbal medicine that contains Acyranthes japonica Nakai and Eucommia ulmoides Oliver traditionally used for joint and spinal diseases. This study aimed to establish an efficient method of extracting SJ004 to standardize using the yield, high-performance liquid chromatography (HPLC), and antioxidant assay. Methods SJ004 was extracted with distilled water, 70% and 100% of ethyl alcohol (EtOH). The method validation of 20-hydroxyecdysone and pinoresinol diglucoside was determined by HPLC-photo diode array and the content of SJ004 was calculated. The antioxidant activity of each extract was compared and measured using total flavonoids, total phenolic compounds, 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid), and ferric reducing antioxidant power according to the standard protocol. Results The yield was highest in pure water extract and lowest in 100% EtOH. But, the content of marker compounds indicating 20-hydroxyecdysone and pinoresinol diglucoside was highest in 100% EtOH extract. In the physiological activity measurement using antioxidant activity, 100% ethanol extract was highest. The limit of detection indicating 20-hydroxyecdysone and pinoresinol diglucoside were analyzed 0.33 ㎍/mL, 0.1616 ㎍/mL, and the limit of quantification were analyzed 1.01 ㎍/mL and 0.49 ㎍/mL respectively. Conclusions The experimental results showed that the extraction conditions have a significant effect on content of marker compounds and antioxidant activity. As a result of method validation, SJ004 was standardized by 20-hydroxyecdysone and pinoresinol diglucoside.

• 분석과학
• /
• 제34권4호
• /
• pp.160-171
• /
• 2021

Synthetic azo dyes are used extensively in herbal medicines to render the medicines more visually attractive to consumers. This study developed and validated a rapid high-performance liquid chromatography (HPLC) method to determine whether synthetic colorants such as Tartrazine, Auramine O, Metanil yellow, Sunset yellow, and Orange II are used extensively in Typha orientalis. To increase the recovery of the synthetic dyes, this method employed containing 50 mM ammonium acetate in 70 % methanol at first extraction and 100 mM HCl in 70 % methanol at second extraction. Five synthetic pigments in Typha orientalis were separated by gradient elution with a mobile phase consisting of acetonitrile and 50 mM ammonium acetate in distilled water at ultra-violet (UV) detection 428 nm or 500 nm. Additionally, this study established the liquid chromatography tandem mass spectrometry (LC-MS/MS) method to confirm positive samples suspected by HPLC results. The HPLC-UV method had good linearity, indicating r²> 0.999. The recoveries of the samples spiked with three different concentration ranged from 73.8~91.5 %, and relative standard deviation values indicated 0.2~5.2 %. The established LC-MS/MS could successfully identify the synthetic pigments in herbal medicine samples. The study demonstrates that Typha orientalis adulterated by yellowish synthetic dyes can be successfully distinguished when using the HPLC-UV method.