• Journal of Environmental Health Sciences
• /
• v.46 no.3
• /
• pp.324-334
• /
• 2020

Objectives: This study was conducted to estimate the related health risk by investigating the content of biogenic amines (BAs) in commercial fermented alcoholic beverages. Methods: Ninety-seven samples, including takjus (34), fruit wines (26), distilled liquors (20) and beers (17) were purchased in Gangwon-do (Province) in 2019. The eight BAs (putrescine, cadaverine, spermine, spermidine, tyramine, β-phenylethylamine, histamine, and tryptamine) were analyzed by high performance liquid chromatograph (HPLC) after extraction (0.4 M HClO₄), pigment removal (carbon cartridge) and derivatization (1% dansylchloride). The health risk of exposure to BAs due to ingestion of commercial fermented alcoholic beverages was estimated as the margin of exposure (MOE). Results: Various BAs were detected in takju, fruit wine, distilled liquor and beer. Putrescine (not detected (ND)-12.60 mg/L), cadaverine (ND-5.45 mg/L), tyramine (ND-8.34 mg/L), β-phenylethylamine (ND-13.73 mg/L), histamine (ND-7.96 mg/L), and tryptamine (ND-19.00 mg/L) were found in takju. Putrescine (ND-15.34 mg/L), cadaverine (ND-7.90 mg/L), β-phenylethylamine (ND-3.06 mg/L), histamine (ND-9.68 mg/L), and tryptamine (ND-14.06 mg/L) were identified in fruit wine. Putrescine (less than limit of detection (

• Journal of the Korean Society for Environmental Technology
• /
• v.19 no.6
• /
• pp.493-502
• /
• 2018

The purpose of this study was to develop EM media for water treatment and to remove nitrogen and phosphorus which cause water algae boom in water system. The ideal mixing ratio of raw material such as clay: zeolite: vermiculite: activated carbon for manufacturing the EM media was 10: 2.5: 0.1: 2, and the calcination temperature was $700^{\circ}C$. The comparison of the physical properties of manufactures using distilled water and EM activated liquid as the material mixture are as follows. Porosity and density of EM media were 39.98 % and $1.13kg/m^3$, adsorption efficiencies of nitrogen and phosphorus were 69.3 % and 38.9 %. In contrast, porosity and density of distilled water media were 37.80 % and $1.11kg/m^3$, and adsorption efficiencies of nitrogen and phosphorus were 62.5 % and 37.8 %. The adsorption rate of nitrogen and phosphorus in the EM media was higher than that of the distilled water made one by 6.8 % and 1.1 %, respectively. The adsorption characteristics of the media to nitrogen and phosphorus could be expressed by the Freudlich adsorption isotherm. The change of calcination time did not affect the adsorption efficiency of phosphorus and nitrogen when EM media was formed, but it was considered that it affects the strength of media. Nitrogen removal efficiency was the best record in 4 hours of calcination time and 3 hours of calcination time in phosphorus removal efficiency.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.2
• /
• pp.249-254
• /
• 2004

Effect of mulberry tree powders on the antioxidant activity of submerged -liquid culture of mushrooms was investigated. Agaricus blazei (AB), Hericicum erinacium (HE), Pleurotus ostreatus (PO), Phellinus linteu (PL) and Paecilomyces japonicus (PJ) were cultured in a shaking incubator (200 rpm, $25^{\circ}C$) for 7 days in culture media: 1) basal medium (BM) and 2) BM+1% mulberry tree powders (BMM). Hot water extracts from the submerged-liquid cultures of mushrooms and BMM were freeze-dried for the measurement of antioxidant activity, of which reaction mixture (25 mL: 10 mL of 0.2 M sodium phosphate buffer, pH 8.0; 4.5 mL distilled water; and 10.5 mL ethanol) contained 275 $\mu$mol linoleic acid and one mg test sample. The reaction mixture was incubated in a shaking incubator (200 rpm, 4$0^{\circ}C$) for 16 days. Peroxide value (POV) was measured for a period of over 16 days, and malonaldehyde (MA) was determined only for samples from the day 16 of incubation. Mycelial weight of mushroom strains cultured in BMM was greater than BM. The antioxidant activities of AB-cultured in BW (AB-BMM) and HE-cultured in BMM (HE-BMM) were superior to those of other mushroom strains-cultured in BMM or BM and of BMM. These results suggest that mulberry tree powders enhance the antioxidant activity of submerged-liquid culture of mushroom strains. The AB-BMM and HE-BMM were the most active cultures.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.45-45
• /
• 2018

We had already reported the successful germination for green pods of purple lady's slipper orchid (Cypripedium macranthos Sw.). The green pod methods is to take immature seeds in green capsules, sterilize the capsule, and take out the sterile seeds. This method, however, needs very critical time of harvest. The critical time of seed harvest changes depending upon the species, condition of the specimen, and climatic influence, and the right time lies between 5 and 12 weeks after fertilization. In this study, the mature seeds were collected after 120-130 days with hand-polination of lady's slipper orchids. Mature seeds are usually dormant and it has to be overcome, either with hormone or storing the seeds near freezing for two or three months to break dormancy. The seeds were first surface sterilized with 70% ethanol and then transferred 1% NaOCl for 10-15 minutes, followed by rinses 3 times with sterilized distilled water. The cypripedium seeds consists of an embryo within a seed coat known as a testa. The testa is water repellent and the seed has a large air space between the embryo and testa so the seed tends to float on water. We had resolved the problems with vacuum pump to soak water into the testa before sterilization. The seeds were placed on liquid or agar solidified germination media. Cultures were incubated at $24{\pm}1^{\circ}C$ in dark. The seeds were germinated in 6-8 weeks in liquid suspension culture (germination percentage over 18%); however, the seeds on agar solidified media took more than 5 months to germinate and the germination percentage less than 5%. The most effective media for liquid culture was 1/4 strength Murashige and Skoog (MS) medium with 50 ml/l coconut water ($4brix^{\circ}$) at pH 5.8.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.25 no.4
• /
• pp.304-310
• /
• 1999

This study was designed to find the effect of Minocycline loaded microcapsule applied locally to tissue by measuring drug concentration in tissue and serum by HPLC and to achieve optimal drug delivery system and duration to a specific target site. Control group were administrated minocycline intramuscularly twice a day with $0.2{\mu}g/100g$ for 1 to 10 days. In experimental group, surgical wound was created on Rt. cheek and then minocycline loaded microcapsule was applied into the space between superficial and deep layer of masseter muscle. Animals were sacrificed at 1, 3, 5, 7, 10 days after initial administration, blood was obtained from heart and right masseter muscle was excised. Blood sample was centrifuged at 3000rpm for 15min. Tissue sample was homogenized, left at room temperature for 48hr and centrifuged at 4000g for 5min. Supernatant was completely dried and dissolved in distilled water. Analysis was conducted using a ${\mu}Bondapack$ C18 column. The mobile phase was 0.2M Ammonium Oxalate/0.1M EDTA/DMF=11/4/5 solution, which was injected into the column and detected with photodiode detector at 344nm wavelength. The results were as follows : 1. This method was reliable, could be replicated and suitable for minocycline analysis in tissue as well as serum. 2. In tissue, concentration of minocycline of experimental group was higher than that of control group for 5days. 3. Except 1 day, concentration of minocycline in serum of experimental group was lower than that of control group. 4. Concentration of minocycline in tissue was much higher than that in serum. From these results, minocycline loaded microcapsule might be effective tool for local drug delivery system might be useful for treatment of infections of oral and maxillofacial region and management of infected surgical wound, minimizing systemic effects.

• Journal of Embryo Transfer
• /
• v.23 no.4
• /
• pp.239-243
• /
• 2008

This study was conducted to investigate the effects of type of the sugar supplemented to the extender on the vigor, viability and intact acrosomal rates of frozen-thawed dog spermatozoa. The ejaculated semen was diluted with TRIS-citric acid extender containing 200mM TRIS, 73mM citric acid, 6% (v/v) glycerol, 20% (v/v) egg yolk, 1% (v/v) antibiotics (streptomycin/penicillin), 44 mM sugar, which was either glucose, fructose or glucose-fructose combination, and distilled water to make the final volume of 100ml. Extended semen samples were cooled at $4^{\circ}C$ for an hour, packaged in 0.25ml straws, equilibrated for 10 minutes in liquid nitrogen vapor, and frozen in liquid nitrogen. Samples were thawed by placing straws into $37^{\circ}C$ water for 120 seconds. After thawing, vigor, viability and intact acrosomal rates of frozen-thawed semen were compared according to type of sugar. No significant differences were observed between glucose and fructose groups. In addition, combination of the 2 sugars also did not show any significant differences in the vigor, viability and intact acrosomal rates. In conclusion, glucose and fructose were equally efficient as sugar supplements for freezing extender.

• Journal of Power System Engineering
• /
• v.10 no.2
• /
• pp.47-53
• /
• 2006

This study concerns the performance of condensation heat transfer in plain and grooved thermosyphons. Distilled water, methanol, ethanol have been used as the working fluids. In the present work, a copper tube of the length of 1200mm and 14.28mm of inside diameter is used as the container of the thermosyphon. Each of the evaporator and the condenser section has a length of 550mm, while the remaining part of the thermosyphon tube is adiabatic section. A study was carried out with the characteristics of heat transfer of the thermosyphon 50, 60, 70, 80, 90 helical grooves in which boiling and condensation occur. The liquid filling as the ratio of working fluid volume to total volume of thermosyphon, the kinds of working fluid, the inclination angle, grooves and operating temperature have been used as the experimental parameters. The experimental results show that the number of grooves, the amount of the working fluid, the kind of working fluid, angle of inclination angle are very important factors for the operation of thermosyphon. The maximum heat transfer was obtained when the liquid fill was about 20 to 25 % of the thermosyphon volume. The relatively high rates of heat transfer have been achieved in the thermosyphon with grooves. The helical grooved thermosyphon having 70 to 80 grooves in water, 60 to 70 grooves in methanol and 70 to 80 grooves in ethanol shows the best heat transfer coefficient in both condensation.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.417-422
• /
• 2016

PURPOSE. The purposes of this study were to evaluate the staining resistance of CAD/CAM resin-ceramics polished with different techniques and to determine the effectiveness of the polishing techniques on resin-ceramics, comparing it with that of a glazed glass-ceramic. MATERIALS AND METHODS. Four different CAD/CAM ceramics (feldspathic ceramic: C-CEREC Blocs, (SIRONA) and three resin-ceramics: L-Lava Ultimate, (3M ESPE), E-Enamic, (VITA) and CS-CeraSmart, (GC)) and one light cure composite resin: ME-Clearfil Majesty Esthetic (Kuraray) were used. Only C samples were glazed (gl). Other restorations were divided into four groups according to the polishing technique: nonpolished control group (c), a group polished with light cure liquid polish (Biscover LV BISCO) (bb), a group polished with ceramic polishing kit (Diapol, EVE) (cd), and a group polished with composite polishing kit (Clearfil Twist Dia, Kuraray) (kc). Glazed C samples and the polished samples were further divided into four subgroups and immersed into different solutions: distilled water, tea, coffee, and fermented black carrot juice. Eight samples ($8{\times}8{\times}1mm$) were prepared for each subgroup. According to CIELab system, four color measurements were made: before immersion, immersion after 1 day, after 1 week, and after 1 month. Data were analyzed with repeated measures of ANOVA (${\alpha}=.05$). RESULTS. The highest staining resistance was found in gl samples. There was no difference among gl, kc and cd (P>.05). Staining resistance of gl was significantly higher than that of bb (P<.05). Staining resistances of E and CS were significantly higher than those of L and ME (P<.05). CONCLUSION. Ceramic and composite polishing kits can be used for resin ceramics as a counterpart of glazing procedure used for full ceramic materials. Liquid polish has limited indications for resin ceramics.

• Journal of Korean Medicine Rehabilitation
• /
• v.30 no.2
• /
• pp.67-75
• /
• 2020

Objectives SJ004 is a natural herbal medicine that contains Acyranthes japonica Nakai and Eucommia ulmoides Oliver traditionally used for joint and spinal diseases. This study aimed to establish an efficient method of extracting SJ004 to standardize using the yield, high-performance liquid chromatography (HPLC), and antioxidant assay. Methods SJ004 was extracted with distilled water, 70% and 100% of ethyl alcohol (EtOH). The method validation of 20-hydroxyecdysone and pinoresinol diglucoside was determined by HPLC-photo diode array and the content of SJ004 was calculated. The antioxidant activity of each extract was compared and measured using total flavonoids, total phenolic compounds, 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid), and ferric reducing antioxidant power according to the standard protocol. Results The yield was highest in pure water extract and lowest in 100% EtOH. But, the content of marker compounds indicating 20-hydroxyecdysone and pinoresinol diglucoside was highest in 100% EtOH extract. In the physiological activity measurement using antioxidant activity, 100% ethanol extract was highest. The limit of detection indicating 20-hydroxyecdysone and pinoresinol diglucoside were analyzed 0.33 ㎍/mL, 0.1616 ㎍/mL, and the limit of quantification were analyzed 1.01 ㎍/mL and 0.49 ㎍/mL respectively. Conclusions The experimental results showed that the extraction conditions have a significant effect on content of marker compounds and antioxidant activity. As a result of method validation, SJ004 was standardized by 20-hydroxyecdysone and pinoresinol diglucoside.

• Analytical Science and Technology
• /
• v.34 no.4
• /
• pp.160-171
• /
• 2021

Synthetic azo dyes are used extensively in herbal medicines to render the medicines more visually attractive to consumers. This study developed and validated a rapid high-performance liquid chromatography (HPLC) method to determine whether synthetic colorants such as Tartrazine, Auramine O, Metanil yellow, Sunset yellow, and Orange II are used extensively in Typha orientalis. To increase the recovery of the synthetic dyes, this method employed containing 50 mM ammonium acetate in 70 % methanol at first extraction and 100 mM HCl in 70 % methanol at second extraction. Five synthetic pigments in Typha orientalis were separated by gradient elution with a mobile phase consisting of acetonitrile and 50 mM ammonium acetate in distilled water at ultra-violet (UV) detection 428 nm or 500 nm. Additionally, this study established the liquid chromatography tandem mass spectrometry (LC-MS/MS) method to confirm positive samples suspected by HPLC results. The HPLC-UV method had good linearity, indicating r²> 0.999. The recoveries of the samples spiked with three different concentration ranged from 73.8~91.5 %, and relative standard deviation values indicated 0.2~5.2 %. The established LC-MS/MS could successfully identify the synthetic pigments in herbal medicine samples. The study demonstrates that Typha orientalis adulterated by yellowish synthetic dyes can be successfully distinguished when using the HPLC-UV method.