• Korean Journal of Food Science and Technology
• /
• v.38 no.2
• /
• pp.159-164
• /
• 2006

Volatile components of Phellinus linteus produced from different areas were collected by simultaneous steam distillation-solvent extraction method (SDE). Concentrated extracts analyzed and identified by GC and GC-MS showed musty and earthy characteristics. 2-Methylphenol, methoxy benzene, coumaran, azulene, ${\alpha}-cedrene,\;{\alpha}-longipinene,\;{\beta}-selinene,\;{\alpha}-selinene$, camphor, ${\gamma}-ionone,\;{\beta}-ionone$, phytol, and borneol not reported in other edible mushrooms, were identified and/or tentatively identified in P. linteus for the first time. Main volatile components of P. linteus (Busan-Jinsung: BJ) were phytol from chlorophyll and methoxy benzenes having musty odor. Volatile components of P. linteus (Jinju-Kumwhang: JK) resembled those of BJ, but with high concentration of phenylacetaldehyde contributing to flower-odor. P. linteus (Cheju-Gullim: CG) contained low concentration of methoxy benzenes, but high concentration of phenylacetaldehyde. Low concentrations of ${\gamma}-ionone\;and\;{\beta}-ionone$ were identified in three kinds of P. linteus. They appeared to have been produced from degradation of carotenoid, which suggests P. linteus contains a carotenoid pigment.

• Applied Biological Chemistry
• /
• v.45 no.1
• /
• pp.11-17
• /
• 2002

Fermentation characteristics with/without nitrogen source and quality of the fruit distillate of Opuntia ficus-indica var. saboten were investigated during the manufacturing process of a Korean traditional liquor. As the fermentation period increased, acidity, brix degree, and alcohol concentration increased, whereas pH and contents of reducing sugar decreased. Acidity, pH, and brix degree were higher, whereas the content of reducing sugar lower, in the nitrogen source-added distillate than in the distillate without nitrogen source. The growth of yeast increased, while that of bacteria decreased; this trend was more prominent with the addition of a nitrogen source. Sojues, distilled from two types of mashes and diluted with $H_2O$ and tails of distillate into 22% alcohol concentration, showed pH $3.7{\sim}4.0$, acidity $0.02{\sim}0.10$, and $5.4{\sim}6.1$ $^{\circ}Brix$. Analysis through GC using direct injection methods revealed common volatile flavor compounds in sojues, including acetaldehyde, acetyl acetone, acetic acid ethyl ester, ethyl alcohol, 2-propyl alcohol, acetone, n-propyl alcohol, butanoic acid methyl ester, 2-phenyl ethanol, thymol, acetic acid phenyl ester, and vanillic aldehyde. As revealed through the sensory evaluation, no significant difference (p>0.05) in overall acceptability was shown among four experimental groups, while color and flavor showed significant differences(p<0.05).

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.450-458
• /
• 2012

In order to reduce the effects of greenhouse gas (GHG) emissions, the South Korean government has announced a special platform of technologies as part of an effort to minimize global climate change. To further this effort, the Korean government has pledged to increase low-carbon and carbon neutral resources for biofuel derived from biomass to replace fossil and to decrease levels of carbon dioxide. In general, second generation biofuel produced form woody biomass is expected to be an effective avenue for reducing fossil fuel consumption and greenhouse gas (GHG) emissions in road transport. It is important that under the new Korean initiative, pilot scale studies evolve practices to produce biomass-to-liquid (BTL) fuel. This study reports the quality characteristics of F-T(Fischer-Tropsch) diesel for production of BTL fuel. Synthetic F-Tdiesel fuel can be used in automotive diesel engines, pure or blended with automotive diesel, due to its similar physical properties to diesel. F-T diesel fuel was synthesized by Fischer-Tropsch (F-T) process with syngas($H_2$/CO), Fe basedcatalyst in low temperature condition($240^{\circ}C$). Synthetic F-T diesel with diesel compositions after distillation process is consisted of $C_{12}{\sim}C_{23+}$ mixture as a kerosine, diesel compositions of n-paraffin and iso-paraffin compounds. Synthetic F-T diesel investigated a very high cetane number, low aromatic composition and sulfur free level compared to automotive diesel. Synthetic F-T diesel also show The wear scar of synthetic F-T diesel show poor lubricity due to low content of sulfur and aromatic compounds compared to automotive diesel.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.738-746
• /
• 2006

Aroma compounds in four different Byeolmijang made from optional ingredient addition were extracted by SDE (simultaneous steam distillation extraction) and analyzed with GC (gas chromatography) and GC/MS (mass-spectrometry). The major aroma compounds in the four different Byeolmijang during aging were 1-octene-3-ol, hexanal, benzeneacetaldehyde, benzaldehyde, fufural, pyrazine, furan and phenol type compounds. Generally, benzeneacetaldehyde, benzaldehyde, fufural and phenol type compounds were increased during aging. On the other hand, 1-octen-3-ol, hexanal and furan were decreased during aging. Furfural, 2-furanmathanol and benzeneacetaldehyde in Sanghwangjang, 3-methyl-1-butanol, phenol and 1H-indole in Mujang, hexanal, 1-octen-3-ol and 2,4-decadienal in Bizijang and hexanal, tetramethylpyrazine and 2-methoxy-4-vinylphenol in Jigeumjang were identified as major aroma compounds, respectively. Generally, the major aroma compound in four different Byeolmijang with optional ingredient was similar with control and pyrazine, furan and phenol type compounds were decreased to addition with optional ingredient. The major aroma compound in Sanghwangjang with optional ingredient (onion) were 1-hexanol and 2,5-dimethylthiophene and the major aroma compounds were 1,2,4-trithiolane and 2-buthyl-2-octenal in Mujang with optional ingredient (Letinus edodes). Furfural, benzaldehyde, benzeneacetaldehyde, 1,2,4-trithiolane and lenthionine were detected in Bizijang due to the addition of powdered Letinus edodes. Linaool and ${\beta}-lonone$ were detected in Jigeumjang due to the addition of powdered red pepper.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.874-882
• /
• 2017

As the interest on the air-pollution is gradually rising up at home and abroad, automotiv e and fuel researchers have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward three main issues : evaporative, performance, air pollution. In addition, researcher studied the environment problems of the bio-ethanol, bio-butanol, bio-ETBE (Ethyl Tertiary Butyl Ether), MTBE (Methyl Tert iary Butyl Ether) fuel contained in the fuel as octane number improver. The researchers have many dat a about the health effects of ingestion of octane number improver. However, the data support the con clusion that octane number improver is a potential human carcinogen at high doses. Based on the bio-fuel and octane number improver types (bio-ethanol, bio-butanol, bio-ETBE, MTBE), this paper dis cussed the influence of gasoline fuel properties on the evaporative emission characteristics. Also, this p aper assessed the acceleration and power performance of gasoline vehicle for the bio-fuel property. As a result of the experiment, it was found that all the test fuels meet the domestic exhaust gas standards, and as a result of measurement of the vapor pressure of the test fuels, the bio - ethanol : 15 kPa and the biobutanol : 1.6 kPa. thus when manufacturing E3 fuel, Increasing the biobutanol content reduces evaporation gas and vapor pressure. In addition, Similar accelerating and powering performance was shown for the type of biofuel and when bio-butanol and bio-ethanol were compared accelerated perf ormance was improved by about 3.9% and vehicle power by 0.8%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.2
• /
• pp.183-193
• /
• 1988

The relationship between the sulfur fertilization, and the quality and yield of garlic was investigated. The garlic was grown in pot and field at the five fertilization levels of sulfur. The growth characteristics, yield and flavour components of the garlic were studied. The results were summarized as follows; 1. The sulfur applications contributed to a weight and yield of the bulb in SP-10 (10kg/10a) and SF-20 (20kg/10a) significantly, respectively. 2. From the volatile oil obtained by steam distillation of garlic, fourteen organie sulfur components were separated, identified and quantified by GC and GC/MASS and the SP-10 and SF-20 were higher in the concentration of the flavour components in the volatile oil than other treatments. 3. It is considered that the organic sulfur components were synthesized in the top and transported to the bulb of the garlic. 4. In conclusion, SF-20, 20kg/sulfur per 10a, could be recommended to get maximum yield and a good quality of garlic in view of evaluation through the contents of organic sulfur components in the volatile oil and the yield of the bulb.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.136-152
• /
• 2017

The thermodynamic models, PC-SAFT (Perturbed-Chain Statistical Associated Fluid Theory) state equation and the Two-model approach liquid activity coefficient model NRTL (Non Random Two Liquid) + Henry + Peng-Robinson, for modeling the Rectisol process using methanol aqueous solution as the $CO_2$ removal solvent were compared. In addition, to determine the new binary interaction parameters of the PC-SAFT state equations and the Henry's constant of the two-model approach, absorption equilibrium experiments between carbon dioxide and methanol at 273.25K and 262.35K were carried out and regression analysis was performed. The accuracy of the newly determined parameters was verified through the regression results of the experimental data. These model equations and validated parameters were used to model the carbon dioxide removal process. In the case of using the two-model approach, the methanol solvent flow rate required to remove 99.00% of $CO_2$ was estimated to be approximately 43.72% higher, the cooling water consumption in the distillation tower was 39.22% higher, and the steam consumption was 43.09% higher than that using PC-SAFT EOS. In conclusion, the Rectisol process operating under high pressure was designed to be larger than that using the PC-SAFT state equation when modeled using the liquid activity coefficient model equation with Henry's relation. For this reason, if the quantity of low-solubility gas components dissolved in a liquid at a constant temperature is proportional to the partial pressure of the gas phase, the carbon dioxide with high solubility in methanol does not predict the absorption characteristics between methanol and carbon dioxide.

• Clean Technology
• /
• v.26 no.2
• /
• pp.102-108
• /
• 2020

In recent years, packed column has been widely used in separation processes, such as absorption, desorption, distillation, and extraction, in the petrochemical, fine chemistry, and environmental industries. Packed column is used as a contacting facility for gas-liquid and liquid-liquid systems filled with random packed materials in the column. Packed column has various advantages such as low pressure drop, economical efficiency, thermally sensitive liquids, easy repairing restoration, and noxious gas treatment. The performance of a packed column is highly dependent on the maintenance of good gas and liquid distribution throughout a packed bed; thus, this is an important consideration in a design of packed column. In this study, hydraulic pressure drop, hold-up as a function of liquid load, and mass transfer in the air, air/water, and air-NH₃/water systems were studied to find the geometrical characteristic for raschig super-ring experiment dry pressure drop. Based on the results, design factors and operating conditions to handle noxious gases were obtained. The dry pressure drop of the random packing raschig super-ring was linearly increased as a function of gas capacity factor with various liquid loads in the Air/Water system. This result is lower than that of 35 mm Pall-ring, which is most commonly used in the industrial field. Also, it can be found that the hydraulic pressure drop of raschig super-ring is consistently increased by gas capacity factor with various liquid loads. When gas capacity factor with various liquid loads is increased from 1.855 to 2.323 kg^-1/2 m^-1/2 S^-1, hydraulic pressure drop increases around 17%. Finally, the liquid hold-up related to packing volume, which is a parameter of specific liquid load depending on gas capacity factor, shows consistent increase by around 3.84 kg^-1/2 m^-1/2 S^-1 of the gas capacity factor. However, liquid hold-up significantly increases above it.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.5
• /
• pp.594-600
• /
• 2009

Quality characteristics of white lotus leaf tea (LLT) fermented with or without mycelial Paecilomyces japonica were investigated. Extraction yield and browning index of hot water extract from non fermented and fermented LLTs were higher than those of ethanol extract (p<0.05). In all LLTs, nutritional components such as total free sugar, free amino acids and minerals of hot water extracts were higher than those of ethanol extracts except for total organic acids (p<0.05). Contents of total free sugar and organic acids were markedly increased through fermentation process of mycelial Paecilomyces japonica. in the same solvent extracts (p<0.05). Contents of most taste components of fermented LLT were increased by mycelial solid fermentation (p<0.05), but total free amino acids of two extracts were decreased in the range of $37.1{\sim}67.2%$ as compared to non-fermented LLT. Fifty-nine volatile compounds were identified by GC and GC-MS, including 11 aldehydes, 14 alcohols, 11 ketones, 11 hydrocarbones and 12 acids. Aldehyde and ketone compounds were more identified in fermented LLT than in non-fermented LLT being abundant alcohol compounds by simultaneous steam distillation and extraction. The most abundant compounds of LLT identified in this study were curcumene followed by 2,6-bis(1,1-dimethylethyl)-4-methyl-phenol and cyclohexen. Main compounds of fermented LLT were 2,6-bis(1,1-dimethylethyl)-4-methyl-phenol, butanoic acid, furfural, benzaldehyde, hexanoic acid and 2(3H)-furanone.