• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.374-379
• /
• 2006

In this study, carbon nanotubes (CNTs) were grown on glass substrates coated with Ni/Cr by an atmospheric pressure plasma enhanced chemical vapor deposition(AP-PECVD) and their structural and electrical characteristics were investigated as a possible application to the field emitter of field emission display (FED) devices. The substrate temperature ($400{\sim}500^{\circ}C$) were varied and the grown CNTs were multi wall CNTs (at $500^{\circ}C$, 15 - 20 layers of graphene sheets, distance of each layer : 0.3nm, inner diameter: 10 - 15nm, outer diameter: 30 - 40nm). The ratio of defective carbon peak to graphite carbon peak of the CNTs grown at $500^{\circ}C$ (C measured by fourier transform(FT)-Raman was 0.772 $I_D / I_G$ ratio. When field emission properties were measured, the turn-on field was $2.92V/{\mu}m$ and the emission field at $1mA/cm^2$ was $5.325V /{\mu}m$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1352-1357
• /
• 2002

This Paper describes algorithm to extract license plates in vehicle images. Conventional methods perform preprocessing on the entire vehicle image to produce the edge image and binarize it. Hough transform is applied to the binary image to find horizontal and vertical lines, and the license plate area is extracted using the characteristics of license plates. Problems with this approach are that real-time processing is not feasible due to long processing time and that the license plate area is not extracted when lighting is irregular such as at night or when the plate boundary does not show up in the image. This research uses the gray level transition characteristics of license plates to verify the digit area by examining the digit width and the level difference between the background area the digit area, and then extracts the plate area by testing the distance between the verified digits. This research solves the problem of failure in extracting the license plates due to degraded plate boundary as in the conventional methods and resolves the problem of the time requirement by processing the real time such that practical application is possible. This paper Presents a power automated license plate recognition system, which is able to read license numbers of cars, even under circumstances, which are far from ideal. In a real-life test, the percentage of rejected plates wan 13%, whereas 0.4% of the plates were misclassified. Suggestions for further improvements are given.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.68.1-68.1
• /
• 2012

The best part of graphene is - charge-carriers in it are mass less particles which move in near relativistic speeds. Comparing to other materials, electrons in graphene travel much faster - at speeds of $10^8cm/s$. A graphene sheet is pure enough to ensure that electrons can travel a fair distance before colliding. Electronic devices few nanometers long that would be able to transmit charge at breath taking speeds for a fraction of power compared to present day CMOS transistors. Many researches try to check a possibility to make it a perfect replacement for silicon based devices. Graphene has shown high potential to be used as interconnects in the field of high frequency electrical devices. With all those advantages of graphene, we demonstrate characteristics of electrical and optical properties of graphene such as the effect of graphene geometry on the microwave properties using the measurements of S-parameter in range of 500 MHz - 40 GHz at room temperature condition. We confirm that impedance and resistance decrease with increasing the number of graphene layer and w/L ratio. This result shows proper geometry of graphene to be used as high frequency interconnects. This study also presents the optical properties of graphene oxide (GO), which were deposited in different substrate, or influenced by oxygen plasma, were confirmed using different characterization techniques. 4-6 layers of the polycrystalline GO layers, which were confirmed by High resolution transmission electron microscopy (HRTEM) and electron diffraction analysis, were shown short range order of crystallization by the substrate as well as interlayer effect with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups on its layers. X-ray photoelectron Spectroscopy (XPS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation, and Fourier Transform Infrared spectroscopy (FTIR) and XPS analysis shows the changes in oxygen functional groups with nature of substrate. Moreover, the photoluminescent (PL) peak emission wavelength varies with substrate and the broad energy level distribution produces excitation dependent PL emission in a broad wavelength ranging from 400 to 650 nm. The structural and optical properties of oxygen plasma treated GO films for possible optoelectronic applications were also investigated using various characterization techniques. HRTEM and electron diffraction analysis confirmed that the oxygen plasma treatment results short range order crystallization in GO films with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups. In addition, Electron energy loss spectroscopy (EELS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation and XPS analysis shows that epoxy pairs convert to more stable C=O and O-C=O groups with oxygen plasma treatment. The broad energy level distribution resulting from the broad size distribution of the $sp^2$ clusters produces excitation dependent PL emission in a broad wavelength range from 400 to 650 nm. Our results suggest that substrate influenced, or oxygen treatment GO has higher potential for future optoelectronic devices by its various optical properties and visible PL emission.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.361-373
• /
• 2002

In this paper, we propose a channel normalization method to improve the performance of CMS (cepstral mean subtraction) which is widely adopted to normalize a channel variation for speech and speaker recognition. CMS which estimates the channel effects by averaging long-term cepstrum has a weak point that the estimated channel is biased by the formants of voiced speech which include a useful speech information. The proposed Formant-broadened Cepstral Mean Subtraction (FBCMS) is based on the facts that the formants can be found easily in log spectrum which is transformed from the cepstrum by fourier transform and the formants correspond to the dominant poles of all-pole model which is usually modeled vocal tract. The FBCMS evaluates only poles to be broadened from the log spectrum without polynomial factorization and makes a formant-broadened cepstrum by broadening the bandwidths of formant poles. We can estimate the channel cepstrum effectively by averaging formant-broadened cepstral coefficients. We performed the experiments to compare FBCMS with CMS, PFCMS using 4 simulated telephone channels. In the experiment of channel estimation, we evaluated the distance cepstrum of real channel from the cepstrum of estimated channel and found that we were able to get the mean cepstrum closer to the channel cepstrum due to an softening the bias of mean cepstrum to speech. In the experiment of text-independent speaker identification, we showed the result that the proposed method was superior than the conventional CMS and comparable to the pole-filtered CMS. Consequently, we showed the proposed method was efficiently able to normalize the channel variation based on the conventional CMS.

• Journal of Biosystems Engineering
• /
• v.29 no.4
• /
• pp.341-346
• /
• 2004

Recent livestock people concern not only increase of production, but also superior quality of animal-breeding environment. So far, the optimization of the breeding and air environment has been focused on the production increase. In the very near future, the optimization will be emphasized on the environment for the animal welfare and health. Especially, cattle farming demands the precision livestock farming and special attention has to be given to the management of feeding, animal health and fertility. The management of individual animal is the first step for precision livestock farming and animal welfare, and recognizing each individual is important for that. Though electronic identification of a cattle such as RFID(Radio Frequency Identification) has many advantages, RFID implementations practically involve several problems such as the reading speed and distance. In that sense, computer vision might be more effective than RFID for the identification of an individual animal. The researches on the identification of cattle via image processing were mostly performed with the cows having black-white patterns of the Holstein. But, the native Korean and Japanese cattle do not have any definite pattern on the body. The purpose of this research is to identify the Japanese black cattle that does not have a body pattern using computer vision technology and neural network algorithm. Twelve heads of Japanese black cattle have been tested to verify the proposed scheme. The values of input parameters were specified and then computed using the face images of cattle. The images of cattle faces were trained using associate neural network algorithm, and the algorithm was verified by the face images that were transformed using brightness, distortion, and noise factors. As a result, there was difference due to transform ratio of the brightness, distortion, and noise. And, the proposed algorithm could identify 100% in the range from -3 to +3 degrees of the brightness, from -2 to +4 degrees of the distortion, and from 0% to 60% of the noise transformed images. It is concluded that our system can not be applied in real time recognition of the moving cows, but can be used for the cattle being at a standstill.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.213-222
• /
• 2008

Although hyperspectral sensing data have shown great potential to derive various surface information that is not usually available from conventional multispectral image, the acquisition of proper hyperspectral image data are often limited. To use ground-based hyperspectral camera image for remote sensing studies, radiometric calibration should be prerequisite. The objective of this study is to develop radiometric calibration procedure to convert image digital number (DN) value to surface reflectance for the 120 bands ground-based hyperspectral camera. Hyperspectral image and spectral measurements were simultaneously obtained from the experimental target that includes 22 different surface materials of diverse spectral characteristics at wavelength range between 400 to 900 nm. Calibration coefficients to convert image DN value to at-sensor radiance were initially derived from the regression equations between the sample image and spectral measurements using ASD spectroradiometer. Assuming that there is no atmospheric effects when the image acquisition and spectral measurements were made at very close distance in ground, we were also able to derive calibration coefficients that directly transform DN value to surface reflectance. However, these coefficients for deriving reflectance values should not be applied when the camera is used for aerial image that contains significant effect from atmosphere and further atmospheric correction procedure is required in such case.

• Cross-Cultural Studies
• /
• v.53
• /
• pp.193-218
• /
• 2018

In this essay, I examine the interactions of chronotopes in the narrative of Gangnam Blues, a film written and directed by Yu Ha and released in 2015. Bakhtin's chronotope, the connectedness of temporal and spatial relationships in literary narratives, provides the background for the representability of events and becomes the organizing center for the events. Each chronotope offers a different way of acting, interacting and understanding experience, and chronotopes can interact with each other in a single text or between the reader and the represented world. Gangnam Blues is a gangster movie, first of all, showing an individual's illusion of an unlimited possibility for achieving wealth and power. At the same time, the film describes the government's project to transform Gangam, a rural area in the south of the Han, into a new downtown and residential area for Seoul. As the world in the narrative and the world of the author or the reader are all chronotopic, we can see the interactions of chronotopes between the narrative of an individual and the historical narrative, as well as between the narrative about the beginning of Gangnam and the audience's perception of the present Gangnam. In this film, the main character's ambition is shown as part of the social desire for rapid economic achievements in the 1970s, along with high social mobility. The social desire can be explained as envy, as it is fueled by social comparisons and competitions. The main character's pursuit of money and power through the possession of Gangnam land overlaps with the envious desire for the present Gangnam shared by many. The individual's exceptional ambition and violence are not fully examined in this text. Moreover, the film's dependence on the feelings of envy to represent the individual's choice and violence can be a symptom of the lack of critical distance from social desire and envy.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1025-1034
• /
• 2022

In this paper, we propose a post-processing method through interpolation of hole regions that occur when extracting point clouds. When image matching is performed on stereo image data, holes occur due to occlusion and building façade area. This area may become an obstacle to the creation of additional products based on the point cloud in the future, so an effective processing technique is required. First, an initial point cloud is extracted based on the disparity map generated by applying stereo image matching. We transform the point cloud into a grid. Then a hole area is extracted due to occlusion and building façade area. By repeating the process of creating Triangulated Irregular Network (TIN) triangle in the hall area and processing the inner value of the triangle as the minimum height value of the area, it is possible to perform interpolation without awkwardness between the building and the ground surface around the building. A new point cloud is created by adding the location information corresponding to the interpolated area from the grid data as a point. To minimize the addition of unnecessary points during the interpolation process, the interpolated data to an area outside the initial point cloud area was not processed. The RGB brightness value applied to the interpolated point cloud was processed by setting the image with the closest pixel distance to the shooting center among the stereo images used for matching. It was confirmed that the shielded area generated after generating the point cloud of the target area was effectively processed through the proposed technique.

• Journal of Radiation Protection and Research
• /
• v.33 no.1
• /
• pp.13-20
• /
• 2008

The flow rate measurements in a multi-phase flow pipeline were evaluated quantitatively by means of a clamp-on sealed radioisotope based on a cross correlation signal processing technique. The flow rates were calculated by a determination of the transit time between two sealed gamma sources by using a cross correlation function following FFT filtering, then corrected with vapor fraction in the pipeline which was measured by the ${\gamma}$-ray attenuation method. The pipeline model was manufactured by acrylic resin(ID. 8 cm, L=3.5 m, t=10 mm), and the multi-phase flow patterns were realized by an injection of compressed $N_2$ gas. Two sealed gamma sources of $^{137}Cs$ (E=0.662 MeV, ${\Gamma}$ $factor=0.326\;R{\cdot}h^{-1}{\cdot}m^2{\cdot}Ci^{-1}$) of 20 mCi and 17 mCi, and radiation detectors of $2"{\times}2"$ NaI(Tl) scintillation counter (Eberline, SP-3) were used for this study. Under the given conditions(the distance between two sources: 4D(D; inner diameter), N/S ratio: $0.12{\sim}0.15$, sampling time ${\Delta}t$: 4msec), the measured flow rates showed the maximum. relative error of 1.7 % when compared to the real ones through the vapor content corrections($6.1\;%{\sim}9.2\;%$). From a subsequent experiment, it was proven that the closer the distance between the two sealed sources is, the more precise the measured flow rates are. Provided additional studies related to the selection of radioisotopes their activity, and an optimization of the experimental geometry are carried out, it is anticipated that a radioisotope application for flow rate measurements can be used as an important tool for monitoring multi-phase facilities belonging to petrochemical and refinery industries and contributes economically in the light of maintenance and control of them.

• Journal of the Korean Geographical Society
• /
• v.31 no.1
• /
• pp.1-18
• /
• 1996

This study examines the spatial characteristics of postal office patronage in rural areas. in the light of future possible relocation and closures of the postal facilities. Most of private services have flown out small rural central places due to the decrease of supporting population, and there consequently remain only a few public services including government-run post offices at the Myon seats, the lowest level among rural central places in Korea. The small local population and its further decline undermine the rationale for maintaining such public services in depleted rural areas. For the worse of it, the government recently plans to transform the postal system to a quasi-private, corporational structure. One can fear that the profit-seeking nature of the new postal corporation will inevitably force to close many of such small rural facilities. The study first analysed nation-wide censuses of postal offices for the years of 1986 and 1992. The postal services examined are per capita number of postal stamps and revenue stamps sold, and letters, parcels, telegrams and monetary transactions handled at the post offices. It is found that, while the usage of postal services has increased substantially throughout the nation during the period of 1986-1992, the increment has largely been occurred by urban post offices rather than by those in Gun seats (i.e., rural counties); and that the gap of the service levels between urban and rural post offices is ever widening. The study further examined the service differentials among the post offices within rural counties to find that those post offices adjacent to the county (Gun) seats and larger urban centers rendered less amount of services than remote rural post offices, indicating that rural residents tend to partonize larger centers more and more than local Myon seats. At the second stage of the study, questionnaire surveys were conducted in Muju, Kimpo, and Hongsung-Gun's. These three counties are meant to represent respectively the remote, suburban, and intermediary counties in Korea. The analyses of survey data reveal that the postal hinterlands of the county seats extend to much of nearby Myons, the subdivisions of a Gun. It is also found that the extent of postal hinterlands of the three counties and the magnitude of patronage and quite different from each other depending upon the topography, population density, and the propinquity of the counties to metropolitan centers. The findings suggest to reappraise the current flat allocation scheme of public facilites to each of rural subdivisions throughout the nation. A detailed analysis on the travel behavior of the survey respondents yields that age is the most salient variable to distinguish activity spaces of rural residents. The activity spaces of older respondents tend to be more limited within their Myon, whereas those of younger respondents extend across the Myon boundary, toward the central towns and even distant larger cities. The very existence of several activity spaces in rural areas calls for an attention in the future locational decisions of public facilities. The locational criteria, employed by the Ministry of Communication of Korean government to establish a post office, are the size of hinterland population and the distance from adjacent postal facilities. The present study findings suggest two additional criteria: the order in rural central place hierarchy and the propinquity to the upper-level centers of the central hierarchy. These old and new criteria are complementary each other in that the former criteria are employed to determine new office locations, whereas the latter are appropriate to determine facility relocation and closures.