• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.177-180
• /
• 2008

There are many application areas of sensor networks, such as surveillance, hospital monitoring, and home network. These are dependent on the secure operation of networks, and will have serious outcome if the networks is injured. An adversary can inject false data into the network through the compromising node. Ye et al. proposed a statistical en-route filtering scheme (SEF) to detect such false data during forwarding process. In this scheme, it is important that the choice of the threshold value since it trades off security and overhead. This paper presents an adaptive threshold value determining method in the SEF using fuzzy logic. The fuzzy logic determines a security distance value by considering the situation of the network. The Sensor network is divided into several areas by the security distance value, it can each area to uses the different threshold value. The fuzzy based threshold value can reduce the energy consumption in transmitting.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.1
• /
• pp.75-80
• /
• 2008

This paper proposes a method to detect scene change using global decision tree that extract boundary cut that have width of big change that happen by camera brake from difference value of frames. First, calculate frame difference value through regional X2-histogram and normalization, next, calculate distance between difference value using normalization. Shot boundary detection is performed by compare global threshold distance with distance value for two adjacent frames that calculating global threshold distance based on distance between calculated difference value. Global decision tree proposed this paper can detect easily sudden scene change such as motion from object or camera and flashlight.

• International journal of advanced smart convergence
• /
• v.6 no.3
• /
• pp.9-16
• /
• 2017

In this paper, we propose a new routing protocol for wireless sensor networks. This protocol improves energy consumption of ML-LEACH by reducing the transmission distance of member node via Relay Node. Since clusters of each Layer in ML-LEACH are randomly formed, the distance, between member node and cluster head may be longer than specific distance, distance threshold value. To improve this, we propose the new routing protocol using 2-Hop transmission via Relay Node depending on the transmission distance of the member node.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.123-126
• /
• 2000

In this paper, we propose new watermarking technique using weighting factor decision method in the watermark embedding step and adaptive threshold decision method in the watermark extracting step. In our method, we are determined weighting factor in simple by calculating distance between pixel coefficient and neighborhood pixel coefficients and threshold is adaptively determined by searching the minimized extract error value using histogram of difference value.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.289-290
• /
• 2012

This paper propose the distance measurement algorithms using the 3-axis accelermeter sensor. This algorithms is based on the human gait charateristic. The proposed algorithms used the sampling data from the 3-axis accelermeter sensor. We improved the error rate as less than eight-percent compare the real movement distance with measured distance to apply the threshold value and the additional value according to the change of the acceleration value.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2277-2279
• /
• 1999

We have investigated the characteristic analysis of ultrasonic in case of occurring partial discharge in experimental steel chamber. This study presents the discriminative method of partial discharge by optimum threshold value. We have carried out the experiments of measuring partial discharge numbers between ultrasonic sensor and transducer with changing distance and barrier inside steel chamber. After the measured data were trasformed A/D conversion by GPIB, we used the optimum method of threshold value for counting numbers of partial discharge.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.721-726
• /
• 2004

The image binarization is applied frequently as one part of the preprocessing phase for a variety of image processing techniques such as character recognition and image analysis, etc. The performance of binarization algorithms is determined by the selection of threshold value for binarization, and most of the previous binarization algorithms analyze the intensity distribution of the original images by using the histogram and determine the threshold value using the mean value of Intensity or the intensity value corresponding to the valley of the histogram. The previous algorithms could not get the proper threshold value in the case that doesn't show the bimodal characteristic in the intensity histogram or for the case that tries to separate the feature area from the original image. So, this paper proposed the novel algorithm for image binarization, which, first, segments the intensity range of grayscale images to several intervals and calculates mean value of intensity for each interval, and next, repeats the interval integration until getting the final threshold value. The interval integration of two neighborhood intervals calculates the ratio of the distances between mean value and adjacent boundary value of two intervals and determine as the threshold value of the new integrated interval the intensity value that divides the distance between mean values of two intervals according to the ratio. The experiment for performance evaluation of the proposed binarization algorithm showed that the proposed algorithm generates the more effective threshold value than the previous algorithms.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.76-87
• /
• 1998

The concentration of welding fume was measured by 221 welders themselves in chassis frame workplace of the manufactory from February, 1, 1996 to May, 31, 1997. Welding parameters were the welding current and the distance between helmet and arc. Those two optimum conditions were proposed by excess probability analysis using logistic regression, so the best position in the workplace was proposed considering two factors to control the welding fume. The results are as followings; 1) The excess proability of welding fume TLV was over 99% in above 260 Amperes of welding current and also in below 30cm of distanced between helmet and arc. 2) The equation from logistic regression analysis using SPSS/PC+5.02 had the welding current as a independent variable and the excess of welding fume TLV as a dependent variable (p<0.05). Logit(welding fume TLV) = 0.1296 ${\times}$ wlding currnet - 28.8750 3) The equation from logistic regression analysis using SPSS/PC+5.02 had the distance between helmet and arc as a independent variable and the excess of welding fume threshold limit value a, a dependent variable (p<0.05). Logit (welding fume TLV) = -0.6809 ${\times}$ distance between helmet and arc +25.1665 4) Considering both cases or 2) and 3). the result equation is following. (p<0.05). Logit (welding fume TLV) = 0.1346 ${\times}$ welding current -0.3859 ${\times}$ distance between helmet and arc -15.7382 5) The excess probability of welding fume threshold limit value was 100% in above 240 Ampere of welding current. Thus, below 220 Ampere can be suggested to reduce the 40% number of welders who have a excess welding fume threshold limit value. 6) The excess probability of welding fume TLV was 100% in below 34cm of distance between helmet and arc. Thus, over 38cm can be suggested to reduce the 33% number of welders who have a excess welding fume TLV. 7) Considering both 5) and 6) cases, first of all, the best welding current can be 200 Ampere to have a below 15% of welding fume excess probability for the welders who works in distance of 34-37cm. Secondly, to have a below 30% excess probability of welding fume TLV, the working distance must be over 38cm in 220 Ampere and 32cm in 200 Ampere. 8) To reduce the average exposure concentration of welding fume ($8.21{\pm}5.83mg/m^3$), the movable local exhaust system equipped with flexible hoods can be used.

• Journal of information and communication convergence engineering
• /
• v.12 no.2
• /
• pp.97-103
• /
• 2014

In spectrum sensing, there is a tradeoff between the probability of missed detection and the probability of a false alarm according to the value of the sensing threshold. Therefore, it is important to determine the sensing threshold suitable to the environment of cognitive radio networks. In this study, we consider a cognitive radio-based ad hoc network where secondary users directly communicate by using the same frequency band as the primary system and control their transmit power on the basis of the distance between them. First, we investigate a condition in which the primary and the secondary users can share the same frequency band without harmful interference from each other, and then, propose an algorithm that controls the sensing threshold dynamically on the basis of the transmit power of the secondary user. The analysis and simulation results show that the proposed sensing threshold control algorithm has low probabilities of both missed detection and a false alarm and thus, enables optimized spectrum sharing between the primary and the secondary systems.

• Land and Housing Review
• /
• v.3 no.1
• /
• pp.69-78
• /
• 2012

This study proposes an approach to improve the accuracy of land assessment result focused on the Land Suitability Assessment. The detailed analysis processes are; (a) that they are analyzed considering resistance in distance measurement on the space characteristics of location, and; (b) that an assessment result is measured according to the threshold definition of membership function, which is applied in estimating conservation suitability. The assessment results are; firstly, the method considering resistance better reflects the local characteristics of area with worse accessibility including rivers and mountains than one by linear distance; secondly, the existing method that the maximum value of a target area is defined as the maximum threshold may draw a value evaluated lower than a threshold definition considering the distribution of measured indices. Finally, satellite images are overlapped with the assessed results, the applicability level from the approach proposed by this study is more coincident with the present status. The assessment method proposed by this study can be meaningful in view of that it improves the accuracy of Land Suitability Assessment. Furthermore, it can be applied as SDSS, which can support effective establishment of urban policies, in case of complementing the problems in executing the assessment system.