• Journal of the Ergonomics Society of Korea
• /
• v.6 no.2
• /
• pp.9-18
• /
• 1987

The purpose of this study was to find the optimal stroke width-to-height ratio of the Korean character (Hangeul) which yields the greatest reading distance. In this study, black characters on a white background were used under 200 lux conditions in-doors, with the stroke width-to-height ratios ranging from a very thin 1:125 to heavier 1: 8.3. The criterion was the average reading distance at which three subjects (male university students) having normal visual acuity (1.2) could read the characters. Using the data obtained from the experi- ment, we analyzed the relationship between stroke width-to-height ratio and reading distance. In the case of the black characters on a white background, the greatest reading distances occurred with a range from 1:11.4 to 1:17.9.

• Molecules and Cells
• /
• v.27 no.2
• /
• pp.129-134
• /
• 2009

Legume plants develop root nodules to recruit nitrogen-fixing bacteria called rhizobia. This symbiotic relationship allows the host plants to grow even under nitrogen limiting environment. Since nodule development is an energetically expensive process, the number of nodules should be tightly controlled by the host plants. For this purpose, legume plants utilize a long-distance signaling known as autoregulation of nodulation (AON). AON signaling in legumes has been extensively studied over decades but the underlying molecular mechanism had been largely unclear until recently. With the advent of the model legumes, L. japonicus and M. truncatula, we have been seeing a great progress including isolation of the AON-associated receptor kinase. Here, we summarize recent studies on AON and discuss an updated view of the long-distance control of nodulation.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.2
• /
• pp.104-115
• /
• 1989

In an effort to clarify the wetted patterns of sandy loam soil under trickle irrigation conditions, the distance of wetted zone, infiltration capacity and soil wetted patterns, etc. were measured by gypsum block as soil moisture sensor located every 5 cm vertically and horizontaly in the soil bin under the such conditions as a). irrigation rates set to 2, 4, 6, 8 liters per hour b). total amount of water applied fixed to 14.62 liters per soil bin c) the hearing force of soil measured by plate penetrometer ranging from 1.04 to 1.22kg/cm$_2$ The results can be summarized as follows ; 1. The wetted distance in horizontal direction(H), the wetted distance in vertical direction(D), the horizontal infiltration capacity (iH) and the vertical infiltration capacity(in)could by explained as a function of time t. 2. The horizontal wetted distance (H) is explained by an exponetial function H= a$.$ t where b was found ranging from 021 to 026 under surface trickle irrigation, which was considered a lotlower than the classical value of 0.5 and these measurements were indifferent to the increasing irrigation rates. 3. As for the surface trickle irrigation where horizontal infiltration capacity(iH) is explained as iH = A $.$ t h, the coefficient A increases with respect to irrigation rates within the limits of 0.89~1.34. 4. In terms of surface trickle irrigation of the ratio of Dm Which is maximum vertical wetted distance to Hm, which is maximum horizontal wetted distance, found to be within range of 1.0 to 1.21. It was also noted that the value of Dm decreses when irrigation rates increases while the value of Hm changes the opposite direction. 5. The optimum location of sensors from emitter for surface trickle irrigation should he inside of hemisphere whose lateral radius is 28~30cm long and vertical radius is 10~12cm long. The distance between emitters should be within 60cm long. 6. In the study of vertical wetted distance( D) where D= a $.$ tb, the exponential coefficient b ranged from 0.61 to 0.75 in surface trickle irrigation, and from 0A9 to 0.68 for subsurface trickle irrigation. These measurements showed an increasing tendency to with respect to irrigation rates. 7. In case of vertical infiltration capacity( in), where iD= A $.$ t 1-h, the coefficient A for surface trickle irrigation found to be within range of 0.16 to 0.19 and did not show any relationships with varying degree of irrigation rates. However, the coefficient was varying from 0.09 to 0.22 and showed a tendency to increase vis-a-vis irrigation rates for subsurface trickle irrigation, in contrast. 8. In the observation of subsurface trickle irrigation, it was found that Dm/Hm ratio was within 1.52 to 1.91 and showed a decreasing tendency with respect to increasing rates of irrigation. 9. The location of sensors for subsurface trickle irrigation follows same pattern as above, with vertical distance from emitter being 10~17cm long and horizontal 22~25cm long. The location of emitter should be 50 cm. 10.The relationship between VS which is the volume of wetted soil and Q which is the total amount of water when soil is reached field capacity could be explained as VS= 2.914Q0.91and the irrigation rates showed no impacts on the above relationship.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.145-148
• /
• 1996

In moving object tracking based on the visual sensory feedback, a prerequisite is to determine which feature or which object is to be tracked and then the feature or the object identification precedes the tracking. In this paper, we focus on the object identification not image feature identification. The target identification is realized by finding out corresponding line segments to the hypothesized model segments of the target. The key idea is the combination of the Mahalanobis distance with the geometrica relationship between model segments and extracted line segments. We demonstrate the robustness and feasibility of the proposed target identification algorithm by a moving vehicle identification and tracking in the video traffic surveillance system over images of a road scene.

• Journal of Welding and Joining
• /
• v.14 no.5
• /
• pp.87-94
• /
• 1996

It has been well known in GMA welding process that wire feeding speed (WFS) or deposition rate increases linealy with the increase of wire extension. In this investigation, however, such an well-known relationship was .reconsidered in terms of contact-tube to work distance (CTWD) instead of wire extension. To verify the proposed relationship between WFS and CTWD, bead-on-plate welding was performed with various CTWDs in the range of 15∼35mm under the condition of near-constant voltage and current As expected, the test results showed an excellent linear relation between WFS and CTWD. Furthermore, the value of the slope turned out to be quite similar to those of previous investigators obtained either theoretically or experimentally through the Precise measurement of electrode extension. Present result also demonstred that the increase of CTWD could be very practical measure for increaring deposition rate without any increase of heat input Depending on the tip recess the practical maximum of CTWD was appeared to be limited somewhere in 25∼30mm mainly due to the entrappment of porocity.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1005-1011
• /
• 2007

The brake system of train must posses the large braking effort in order to stop the train safely within the limited traveling distance. But, the excessive braking effort has been deteriorated the ride comfort due to high level of deceleration and jerk, and sometimes occurred the skid, because the applied braking force exceeds the allowable adhesive force. This skid causes not only to increase the stopping distance but also to deteriorate the safety of train and damage the rail surface by wheel flat. In the present paper, the braking force for disc brake of Korea High Speed Train (HSR350x) was measured through on-line test and the adhesion force was estimated by using the analytic model in the skid condition. Also, we have discussed the relationship between the actual disc brake force and the adhesion force in real skid condition.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1643-1648
• /
• 2009

The braking system of train must posses the large baking effort in order to stop the train safety within the limited traveling distance. but, the excessive braking effort has been deteriorated the ride comfort due to high level of deceleration and jerk, and sometimes occurred the skid. because the applied braking force exceeds the allowable adhesive force. this skid causes not only to increase the a stopping distance but also to deteriorate the safety of train and damage the rall surface by wheel flat. In the present paper, braking force for disk brake of Tilting Train eXpress(TTX) was measured though on convention line test and the traction force was estimated by using the analytic model in skid condition. also, we have discussed the relationship between the bake force and traction force in starting condition.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.4
• /
• pp.51-58
• /
• 2008

Unit costs for energy production in bioenergy facilities are dependent upon both fixed cost for facility construction and operational costs including biomass feedstock supply. With the increase of capacity, unit fixed cost could be decreased while supply cost tends to increase due to the longer transportation distance. It is desirable to take into account biomass availability in planning bioenergy facilities. A cumulative curve relationship was proposed to relate biomass availability and cumulative products of biomass amount and transportation distance. Optimum size of gasification facilities was affected by collection cost, biomass cumulative relationship. Based on biomass availability of Icheon-City, optimum sizes were about $400kW_{th}$ for gas production, and about $200kW_{el}$ for power generation. Unit cost of bioenergy production could be substantially reduced by reducing collection cost through supplying biomass from diverse sources including land development areas where significant amount of waste wood is generated. When planning bioenergy facilities, however, biomass availability and spatial distribution are key factors in determining the size of capacity.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.231-240
• /
• 2017

The paper explores the relationship among the personnel characters, organizational formalization and organizational commitment in Korean firms in Shandong province of China. In this paper, the employee's personnel characters include the sexual, job, college graduate, collectivism(value attitude), Power distance(value attitude). The results of anaysis shows that College gratuate have negative effects on the organizational commitment, and the collectivism have positive effection on the affective commitment, the perception of organizational formalization have positive effects on the affective commitment. And, the perception of organizational formalization have moderlate effects among the job, college gratuate, collectivism, power distance with organizational commitment. Based on the these results, the paper described the theoretical and practical implications.

• Knowledge Management Research
• /
• v.22 no.2
• /
• pp.95-117
• /
• 2021

In this study, we investigate which alternatives to choose when giving a gift, according to the giver's relationship with the receiver. In particular, we study which alternatives are preferred when the prices are approximately the same: products with high-brand status but low-model ranking or products with low-brand status but high-model ranking. Leclerc, Hsee, and Nunes(2005) conceptualized the relative preference between a low-ranking model of a high-status brand and a high racking model of a low-status brand. The category effect is the preference for lower-ranking models of high-status brands. Meanwhile, the ranking effect refers to the preference for higher-ranking models of low-ranking brands. Based on construal level theory, the current study suggests that the category and ranking effects vary depending on the giver's relationship (vertical vs. horizontal) and intimacy (distant vs. close) with the person who will receive the gift. We manipulate the relationship and intimacy of the subject receiving the gift and verify the interaction effect. Results reveal that the giver exhibited a category effect in vertical relationships in which the psychological distance was far from the relationship. However, the ranking effect was found in horizontal relationships in which the psychological distance was close. Lastly, the gift selection significantly depends on the level. Overall, this study showed that when choosing a gift, the selection of a low-ranking model of a product from a high-tier brand or a high-ranking model from a low-tier brand might vary depending on the type of relationship and the level of intimacy. In addition, our findings provided managerial implications in targeting and marketing communication strategies based on product status.