• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.251-259
• /
• 1994

Nearfield acoustic holography is known as a powerful tool to study sound radiation from a structure. In this work, the so called backward propagation of sound pressure field is studied to obtain the structure velocity distribution. The results, which were obtained using FFT algorithms, are presented for a finite plate excited at the frequencies above and below coincidence. These results illustrate the effect of stand-off distance and noise. An optimum cutoff frequency in wavenumber domain was suggested to reduce the effects of evanescent wave in the backward propagation. The experimental results were also included for a plate to demonstrate the effectiveness of the suggested cutoff frequency. The optimum cutoff frequency to exclude the unwanted noise in the process of reconstruction of the velocity field gives the good results in both simulations and experiments.

• 한국정보통신학회논문지
• /
• 제17권3호
• /
• pp.698-704
• /
• 2013

영상개선을 위한 영상처리는 응용분야에 따라서 동일한 알고리즘이 각각 다르게 적용되므로 응용분야에 적합한 최적값이 필요하다. 본 논문에서는 X선 의료영상분야에 고주파통과 필터를 적용해서 에지영역을 개선하였고, 결과영상에 상수승수와 오프셋을 더하여 에지영역 및 평탄영역의 컨트라스트를 향상시켰다. 그러므로, 의료영상을 최적화시키기 위해서는 고주파강조필터가 필요함을 알 수 있었다. 또한, 구체적인 최적화 변수값으로는 가우시안 고주파통과필터, 차단주파수의 거리=0.05, 오프셋=0.5 값이다. 마지막으로 이들 최적화 변수값을 적용시켜 시뮬레이션 한 결과, 제안된 방법이 기존 방법들에 비해서 영상의 컨트라스트와 에지부분들을 향상시켰다.

• 대한지리학회지
• /
• 제39권6호
• /
• pp.845-862
• /
• 2004

본 연구는 경기, 강원 지역을 대상으로 감입곡류절단 지형의 공간적 분포 특성을 검토하였다. 강원도에서도 높은 산지지역인 정선군 및 인제군을 주로 흐르는 내린천 및 동대천 등의 하천에서 곡류절단면의 분포 밀도가 가장 높았다. 곡류절단의 발생은 제4기 동안 반복적으로 나타났으며. 빙기와 간빙기 사이의 기후 변동기에 집중된 것으로 추정된다. 지질별로는 퇴적암에서 분포 빈도가 가장 높고, 화성암에서 가장 낮았다. 지질구조로 볼 때, 태백산맥으로부터 서쪽 $11{\sim}20km$ 거리에 가장 많이 분포하며. 적종하천이나 적종하천에 유입하는 지류의 하구부, 즉 단층선에 직교하는 하천에서 곡류절단이 가장 활발하였다. 태백산맥에서의 거리와 해발고도와의 관계는 영서하천에서 매우 뚜렷하고, 하상비고 및 절단면 면적과의 관계에서는 태백산맥에서 서쪽 12km를 기준으로 동서로 갈수록 값이 작아진다. 기반암 종류에 대한 해발고도. 하상비고, 하천차수와의 관계는 공통적으로 퇴적암 지역에서 값이 가장 높으며, 화산암 지역에서 가장 낮다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1215-1221
• /
• 1999

A high speed digital distance relaying algorithm based on a Wavelet Transformation is proposed. To obtain stable phasor values very quickly, first, a lowpass filter which has low cutoff frequency is used. Secondly, db2(Daubechies 2) Wavelet which has the data window of 4 samples is used. A FIR filter which removes the DC-offset component in current relaying signals is applied. In accordance with a series of tests, the operation time of the relaying algorithm is less than 3/4 cycles after faults in a 80 [km], 154[kV], 60[Hz] over-head transmission line system.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.745-754
• /
• 2023

In order to test the recognition ability and accuracy of a target imaging simulator under the irradiation of solar stray light in a laboratory environment, it needs to be fixed on a five-axis turntable during a hardware-in-the-loop simulation test, so the optical system of the simulator should have a long exit pupil distance. This article adopts a secondary imaging method to design a projection optical system suitable for thin-film-transistor liquid crystal displays. The exit pupil distance of the entire optical system is 1,000 mm, and the final optimization results in the 400 nm-850 nm band show that the modulation transfer function (MTF) of the optical system is greater than 0.8 at the cutoff frequency of 72 lp/mm, and the distortion of each field of view of the system is less than 0.04%. Combined with the design results of the optical system, TracePro software was used to model the optical system, and the simulation of the target imaging simulator at the magnitude of -1 to +6 Mv was analyzed and verified. The magnitude error is less than 0.2 Mv, and the irradiance uniformity of the exit pupil surface is greater than 90%, which meets the requirements of the target imaging simulator.

• 한국통신학회논문지
• /
• 제36권7C호
• /
• pp.451-458
• /
• 2011

MAXFLAT(maximally flat) FIR필터 설계는 폐쇄형 솔루션을 제공하는 장점이 있으나 설계의 정확성을 위하여 평탄차수를 정확하고 효율적으로 결정하는 문제가 아직 남아 있다. 본 논문에서는 폐쇄형 솔루션에서 주파수영역 오차함수를 모델링하고 분석하므로 써 직접적이고 정확하게 평탄차수를 결정하는 방법을 제안하였다. 마지막으로 주피수영역 오차함수를 바탕으로 제안한 차단주파수와의 최소거리 방식이 기존의 Herrmann 방식에 비해 매우 정확하고 효율적이라는 것을 입증하였다.

• 한국군사과학기술학회지
• /
• 제12권4호
• /
• pp.483-490
• /
• 2009

In this paper, a novel low-damage silicon nitride passivation for 100nm InAlAs/InGaAs MHEMTs has been developed using remote ICPCVD. The silicon nitride deposited by ICPCVD showed higher quality, higher density, and lower hydrogen concentration than those of silicon nitride deposited by PECVD. In particular, we successfully minimized the plasma damage by separating the silicon nitride deposition region remotely from ICP generation region, typically with distance of 34cm. The silicon nitride passivation with remote ICPCVD has been successfully demonstrated on GaAs MHEMTs with minimized damage. The passivated devices showed considerable improvement in DC characteristics and also exhibited excellent RF characteristics($f_T$of 200GHz).The devices with remote ICPCVD passivation of 50nm silicon nitride exhibited 22% improvement(535mS/mm to 654mS/mm) of a maximum extrinsic transconductance($g_{m.max}$) and 20% improvement(551mA/mm to 662mA/mm) of a maximum saturation drain current ($I_{DS.max}$) compared to those of unpassivated ones, respectively. The results achieved in this work demonstrate that remote ICPCVD is a suitable candidate for the next-generation MHEMT passivation technique.

• 소음진동
• /
• 제7권1호
• /
• pp.99-106
• /
• 1997

Centrigugal fans are widely used due to their ability to achieve relatively high pressure ratios in a short axial distance compared to axial fans. Because of their widespread use, the noise generated by these machines causes one of serious problems. In general, centrigugal fan noise is often dominated by tones at BPF(blade passage frequency) and its higher harmonics. This is a consequence of the strong interaction between the periodic flow discharged radially from the impeller and the stator blades or the cutoff. But in vacuum cleaner fan the noise is dominated by not only the discrete tones of BPF but also broadband frequencies. In this study we investigate the mechanism of broadband noise and predict for the unsteady flow field and the acoustic pressure field associated with the centrifugal fan. DVM(discrete vortex method) is used to calculates the flow field and the Lowson's method is used to predict the acoustic pressures. From the results we find that the broadband noise of a circular casing centrifugal fan is due to the unsteady force fluctuation around the impeller blades related to the vortex shedding. The unsteady forces associated with the shed vortices at impeller and related to the interactions to the diffuser and the exit.

• 한국유체기계학회 논문집
• /
• 제2권3호
• /
• pp.45-51
• /
• 1999

Centrifugal fans are widely used and the noise generated by these machines causes one of the most serious problems. In general, the centrifugal fan noise is often dominated by tones at BPF(blade passage frequency) and its higher harmonics. This is a consequence of the strong interaction between the flow discharged from the impeller and the cutoff in the casing. However, only a few researches have been carried out on predicting the noise due to the difficulty in obtaining detailed information about the flow field and casing effects on noise radiation. The objective of this study is to develop a prediction method for the unsteady flow field and the acoustic pressure field of a centrifugal fan and to calculate the effects of rotating velocity, flow rate, cut-off distance and the number of blades and its effects on the noise of the fan. We assume that the impeller rotates with a constant angular velocity and the flow field around the impeller is incompressible and inviscid. So, a discrete vortex method (DVM) is used to model the centrifugal fan and to calculate the flow field. The force of each element on the blade is calculated with the unsteady Bernoulli equation. Lowson's method is used to predict the acoustic source. The cut-off distance is the most important factor effecting the noise generation. Acoustic pressure is proportional to 2.8, which shows the same scaling index as the experimental result. In this paper, the cut-off distance is found to be the dominant parameter offecting the acoustic pressure.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.47-65
• /
• 2003

The purpose of this study was to investigate the differences of the kinematical and the kinetical factors that calculated from preflight to postflight of salto forward straight 3/2 turn motion between skitters and less-skitters. four S-VHS video cameras operating at 60Hz were used to record the performances. five elite male gymnasts were participated in this study as subjects. three-dimensional coordinates of 20 body landmarks during each trial were collected using a Direct Linear Transformation method. The digitized body landmarks were smoothed using a Butterworth second order with low pass digital filter and a cutoff frequency of 10Hz. 1. A skitter, got a high score for performance, showed shorter time and faster horizontal velocity than a less-skitter at the board contact. also, a skitter extended quickly his knee and hip joint after contacting board for preflight phase. 2. A skitter revealed faster time and horizontal velocity the vault from taking off board than a less-skiller. A skitter took a long time and high distance to get the vertical peak compared with a less-skiller. 3. For the second phase, a skitter, who executes the most optimal motions among the subjects, displayed a long flight time, a high height, and a far flight distance as well as maintaining consistent horizontal speed even at the peak of post flight. On the other side, a less-scorer displayed a slow vertical velocity, distance and a short time at the point of take-off from vault as well as low height at the peak of post flight.