• 동력기계공학회지
• /
• 제13권1호
• /
• pp.33-38
• /
• 2009

In this study, the nose of cam in the automobile engine was modelled into circular disk to analyze the torsional vibration of the cam shaft. The distance between disks was fixed, but the diameter of disks was changed. The torsional vibration of the cam shaft was studied experimentally by the motion of the modelled disk with changing the disk diameter. And the sizes of the modelled disk were selected not to show the natural frequencies over all the experimental ranges. The torsional vibration meter used in this study has a laser system with non-contact measurement method, which can measure both torsional angular vibration velocity and torsional angular vibration displacement simultaneously. The Experimental analysis shows that the characteristics of the torsional vibration in the horizontal rotating shaft can be considerably affected by the arrangement of the modelled disks.

• 한국안광학회지
• /
• 제19권1호
• /
• pp.17-22
• /
• 2014

목적: 시력검사거리에 따른 원거리 시력검사의 신뢰성을 평가하고자 하였다. 방법: 5 m 거리에서 교정시력이 1.0 이상이 되었던 성인 39명(78안)을 대상으로 하였다. 각각의 검사거리(5 m, 4 m, 그리고 3 m)에서 대상자의 교정굴절력을 측정하였다. 시시력표는 자동 챠트(LCD-700, Hyeseong Optic. Co., Korea)를, 타각적 굴절검사는 검영기(Beta 200, Heine, Germany)와 자동굴절검사기(RK-5, Canon, Japan)를 사용하였다. 조절력검사는 (-)렌즈 부가법으로, 조절래그 검사는 근거리 격자시표를 사용하였다. 결과: 구면교정굴절력은 5 m에 비하여 3 m에서 평균 $0.10{\pm}0.38$ D 감소하였고 난시도는 $0.05{\pm}0.10$ D 감소하였으며, 난시축은 우좌안이 귀방향으로 각각 $2.64{\pm}18.75$ 도, $11.43{\pm}48.55$ 도 회전하였다. 교정굴절력의 변동과 난시도의 변동은 최대교정굴절력과의 약한 음의 상관관계를 보였다(r=-0.31, r=-0.29). 결론: 검사거리에 따라 구면교정굴절력과 난시도는 5 m에 비하여 3 m에서 감소하며, 난시축은 귀방향으로 회전하는 경향이 있기 때문에, 안경원에서 원거리 시력검사를 위한 검사거리는 5 m로 개선되어져야 할 것이다.

• 한국전자파학회논문지
• /
• 제11권1호
• /
• pp.18-25
• /
• 2000

본 논문에서는 YIG 발진기(YTO)를 사용한 산업용 FM-CW 마이크로파 거리계를 설계 제작하여, 그 측정 겸과를 제시하였다.YTO는 주파수 선형성이 매우 우수하므로 거리계의 구성에서 별도의 선형화 장치를 필요로 하지 않는다. 운용환경 주변의 장애물로부터 발생되는 반사 선호를 제거하기 위해서 중간주파 선호에 디지털 대역통과 필터를 적용하였다. 이를 위해서 Kaiser window를 사용한 FIR 필터가 설계되었다. 거리 측정 테스트는 4 40m까지 측정할 수 있는 야외 시험장에서 1m 간격으로 실시되었으며, 측정오차의 표준편차가2.33 cm인 측정 결과플 얻었다 본 논문에서 제작된 마이크로파 거리계는 제철소의 용선 운반 차량과 같이 사람이 접근하기 어 려운 산업 시설에서 거리측정용으로 사용될 수 있다

• 한국안전학회지
• /
• 제29권4호
• /
• pp.91-96
• /
• 2014

This research deals with the combustion experiment of pine trees, which are the most representative species in Korea. Experimental data are compared with theoretical ones using Fire Simulation Program(FDS). It is considered that horizontal/vertical temperature distribution and radiant heat influence on adjacent areas in fire scenes. The linear function for separation distance to temperature was drawn by applying Stefan-Boltzmann's law; $y=112.13133{\times}({\sigma}T^4)^{-0.52916}$ for calculating the separation distance. In combustion experiment, the radiant heat came to $1.4{\sim}1.5kW/m^2$ in case of the separation distance by one meter. The numerical values mean that human body show the critical level of pain after one minute without a protective equipment.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.413-418
• /
• 2001

Emergency shut-on valve was developed to shut off natural gas at the front of a gas meter in the house. The shut-off flow rate and differential pressure of this valve was controlled by adjusting the distance between the spool and magnet. Also the spool shape was an important factor in the performance of this valve. The experimental and computational results will be useful for the design having better performance.

• 조명전기설비학회논문지
• /
• 제25권9호
• /
• pp.69-74
• /
• 2011

In this paper, the UV corona camera was developed using the solar blind and Multi Channel Plate(MCP) technology for the target localization of UV image. UV camera developed a $6.4[^{\circ}]{\times}4.8[^{\circ}]$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. UV camera to measure the discharge count and the UV image was developed, compared with a commercial camera, there was no significant difference. In salt spray environments breakdown voltage was lower than the normal state, thereby discharging the image was rapidly growing phenomenon.

• 기술사
• /
• 제23권6호
• /
• pp.41-46
• /
• 1990

First of all, Under given condition such as bit gage of 36mm Drill bit with right class of jack-logs experimental test carried out from two face of Bench, firing of each hole brought 90 degree Angle face and them measured length of Burden and charged ammount of powder as following. (equation omitted) A=Activated Area A=ndi=m S=Peripheral length of Charged. room Ca=Rock Coeffiecency d : di=Hole diameter When constructed subway of Seoul in 1980 the blasting works increased complaint of ground vibration. in order to prevent the damage to structures. Some empirical equations were made as follows on condition with Jackleg Drill (Bit Gage ø 36mm) and within 30 meter distance between blasting site and structures. V=K(D / W)$\^$-n/ N=1.60-1.78 K=48-138 Project one of contineous works to above a determination of empirical equation on the cautious blasting vibration with Crawler Drill(ø 70-75mm) in long distance. V=41(equation omitted) V=124(equation omitted).

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.133-139
• /
• 2010

From the ancient times, there are waves in the ocean. And all the moving body have energy. We have a kind of hope to convert the wave energy into electric one. Finally we can find out a power generator mechanism that mainly use the principle of pulleys. We have made drawings for this and completed the wave energy converter. This wave energy converter consists of several pulleys, rope, generator, buoys and anchors. The distance between an anchor and buoy is changed according to the hight of waves. Several sets of anchors, pulleys and buoys can make the movement of rope, and the ropes wind up a converter axis. In case of 1 meter movement of the buoy, the winding distance will be amplified 2 or 3 times if we use several moving and fixed pulleys. Based on this concept, we developed 2 kind of prototypes. One is for the test in the laboratory and the other is for the field test. Through the two test, we could confirm the usability of this mechanism.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.316-316
• /
• 2014

Two different transparent conducting oxide (TCO) layers of Al-doped ZnO (AZO) and $WO_3$ were prepared by a rf sputtering process. Working pressure, deposition time, and target-to-substrate distance were varied for the sputtering process to improve electrical properties of the resulting layer. Thickness of the TCO layers was measured by a profile meter of ${\alpha}$-step. To evaluate the electrical conductivity, surface resistivity of the TCO layers was measured by a four-point probe technique. Decrease of the working pressure resulted in increase of deposition rate and decrease of surface resistivity of the resulting layer. Increase of the layer thickness due to increased deposition time resulted in decrease of surface resistivity of the resulting layer. The shorter the target-to-substrate distance was, the lower was the surface resistivity of the resulting layer.

• 화약ㆍ발파
• /
• 제8권3호
• /
• pp.3-13
• /
• 1990

First ot of all, under given condition such as bit gage of 36mm Drill bit with right class of jack-leg-experimental test carried out from two face of Bench, firing of each hole brought 90 degree Angle face and them measured length of Burden and charged ammount of powder as following. $ca=\frac{A}{SW}$ A=Activated Area A=nd i=m S=Peripheral length of charged, room Ca=Rock Coeffiecency d: di=Hole diameter When constructed subway of Seoul in 1980 the blasting works increased complaint of ground vibration, in order to prevent the damage to structures. Some empirical equations were made as follows on condition with Jackleg Drill (Bit Gage 36mm) and within 30 meter distance between blasting site and structures. $V=K(D/W)^{-n}$ N=1.60 - 1.78 K= 48 - 138 Project is one of contineous works to above a determination of empirical equation on the cautious blasting vibration with Crawler Drill (70-75mm) in long distance. $V=41(D/\sqrt[3]{W})^{-1.41}$ $30m\le{D}\le{100m}$ $V=124(D/\sqrt[3]{W})^{-1.66}$ $100m\le{D}\le{285m}$.