• 한국항행학회논문지
• /
• 제20권1호
• /
• pp.37-44
• /
• 2016

한국은 성능기반항행 (PBN; performance-based navigation)으로 전환하기 위한 단계적 PBN 이행계획을 2010년에 수립하고 로드맵에 따른 새로운 비행절차를 개발 중에 있다. PBN 비행절차에는 GNSS (global navigation satellite systems), DME (distance measuring equipment), VOR (VHF omnidirectional range), INS (inertial navigation system) 등의 항행시설 (NAVAID; navigation aid)이 활용되는 것으로 되어있다. 그 중에서 GNSS를 이용한 PBN 업무제공이 중심을 이루고 있는 실정이다. 그러나 위성항법신호의 인위적, 자연적 간섭에 의한 취약성이 발견됨에 따라 세계 각국은 다양한 대안항법(APNT; alternative positioning, navigation and timing) 기술을 연구하고 있다. 본 논문에서는 GNSS 신호가 가용하지 않을 경우 기존의 항행시스템으로 지속적인 PBN 운항이 가능한지를 분석하였으며, 결과적으로 국내 일부 공항은 접근 단계 구역에서 대안항법의 구축이 필요한 것으로 나타났다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.173-176
• /
• 2002

DAS(Data Acquisition System) as a ground support equipment has played a critical role in proving the status of ready-to-fire of a rocket system before launch. But it is hard to implement and place a real-time measuring system in a control room at a long distance from the vehicle. In this paper DAS is introduced by being located at the LEC(Launch Equipment Container)[1], 50 meters away from the rocket and connected to remote monitoring system via fiber optics with TCP/IP protocol by means of client/server algorithm. Therefore real-time data acquisition and storage are guaranteed and a convenient and useful MMI (Man-Machine Interface) can be developed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.177-178
• /
• 2015

Various vibration caused by construction vehicles and equipment movement, rock blasting, and crushing obstacle occurs inevitably in construction sites. In this study, we measured the impact of vibration by blasting rock at construction sites, rock crushing, concrete crushing. The measuring instrument was installed in adjacent buildings and observed that blasting vibration differs depending on the charge weight, blasting distance, and the measuring position. The observation was maintained by allowable peak particle velocity standard according to each standards and references.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.375-380
• /
• 2001

This study is on the precision of the optical scanner which is suitable for shape modeling and non-contact equipment, comparing with a razer scanner. The optical scanner not only has all merits that non-contact methods have but also improve a veil phenomenon which is a razer scanner's demerits. However, the optical scanner has not been used extensively because the measurements are not very precise and there are not the definite methods of measurement. Hence, this study is to find out how parameters such as camera's hight, angle, luminous intensity, distance to object, and so on have an influence on measuring using the optical scanner and to establish the methods of measuring precision.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.1013-1017
• /
• 1997

This study is on the precision of the optical scanner which is suitable for shape modeling and non-contact equipment, comparing with a razer scanner. The optical scanner not only has all merits that non-contact methods have but also improve a veil phenomenon which is a razer scanner's demerits. However, the optical scanner has not been used extensively because the measurements are not very precise and there are not the definite methods of measurements, Hence, this study is to find out how parameters such as camera's hight, angle, luminous intensity, distance to object, and so on have an influence on measuring using the optical scanner and to establish the methods of measuring precision.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.841-847
• /
• 2001

This study is on the precision of the optical scanner which is suitable for shape modeling and non-contact equipment, comparing with a razer scanner. The optical scanner not only has all merits that non-contact methods have but also improve a veil phenomenon which is a razer scanner's demerits. However, the optical scanner has not been used extensively because the measurements are not very precise and there are not the definite methods of measurement. Hence, this study is to find out how parameters such as camera's hight, angle, luminous intensity, distance to object, and so on have an influence on measuring using the optical scanner and to establish the methods of measuring precision.

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.78-83
• /
• 2014

To minimize the financial loss due to power facility malfunction, on-line diagnostic techniques are required to grasp any abnormal state of facilities in the live line as well as devices to diagnose abnormal states of power facility in an easy and prompt manner. This study aims to develop a portable UV detecting system by means of UV sensors for easier and efficient inspection of the degradation state of power facility in a long distance. Accordingly, it includes a simulation of corona discharges that may occur due to degradation of power facility and detection of ultraviolet pulse generation depending on the corona discharge intensity and measuring distance in application of UV sensors. Additionally, the optimal algorithm is determined for its application to the system's degradation diagnosis program based on the measured experiment data.

• 한국건설관리학회논문집
• /
• 제14권2호
• /
• pp.78-86
• /
• 2013

지구온난화의 원인인 $CO_2$를 줄이기 위한 연구들이 전(全) 산업분야에서 활발하게 진행되고 있는 가운데, 건설분야에서도 $CO_2$의 발생을 최소화하려는 연구들이 다양하게 추진되고 있다. $CO_2$ 발생량 최소화를 위한 연구는 $CO_2$ 배출량을 기반으로 하고 있는데 $CO_2$배출량을 산정하는 방법은 크게 연료사용량 대비 탄소배출계수를 이용한 방법, LCA기반 방법론 그리고 산업연관표를 이용한 방법으로 나뉜다. 특히 연료사용량을 기반으로 탄소배출계수를 이용하는 방법은 IPCC 에서 3가지 방법(Tier1~Tier3)을 권장하고 있다. 이 중 현재 가장 많이 활용되고 있는 방법이 Tier1으로서 연료사용량과 탄소배출계수만을 이용하는 방법이다. 그러나 이 방법은 차종별 이동거리가 반영되지 않을 뿐 아니라 주행환경 등의 반영이 안되기 때문에 정확한 $CO_2$배출량을 산정할 수 없다. 특히 건설프로젝트 는 프로젝트의 특성에 따라 이산화탄소 배출량은 달라질 수 있다. 하지만 현재의 방법으로는 이러한 차이를 제대로 반영할 수 없다. 따라서 개별 프로젝트의 특성을 반영하여 이산화탄소 배출량을 산정하는 방법론이 필요하며 이러한 방법론의 가장 핵심은 에너지를 사용하는 건설장비의 이산화탄소 배출량을 직접 측정하는 것이다. 본 연구에서는 건설과정에서 발생하는 이산화탄소의 배출량 산정방법론을 개발하기 위한 연구로서 건설장비의 이산화탄소 배출량을 실시간으로 측정할 수 있는 방법의 제안을 목적으로 한다.

• Journal of Magnetics
• /
• 제19권1호
• /
• pp.15-19
• /
• 2014

In this study, for 6-20 MeV electron beam energy occurring in a linear accelerator, the authors attempted to investigate the relation between the effective source-skin distance and the relation between the radiation field and the effective source-skin distance. The equipment used included a 6-20 MeV electron beam from a linear accelerator, and the distance was measured by a ionization chamber targeting the solid phantom. The measurement method for the effective source-skin distance according to the size of the radiation field changes the source-skin distance (100, 105, 110, 115 cm) for the electron beam energy (6, 9, 12, 16, 20 MeV). The effective source-skin distance was measured using the method proposed by Faiz Khan, measuring the dose according to each radiation field ($6{\times}6$, $10{\times}10$, $15{\times}150$, $20{\times}20cm^2$) at the maximum dose depth (1.3, 2.05, 2.7, 2.45, 1.8 cm, respectively) of each energy. In addition, the effective source-skin distance when cut-out blocks ($6{\times}6$, $10{\times}10$, $15{\times}15cm^2$) were used and the effective source-skin distance when they were not used, was measured and compared. The research results showed that the effective source-skin distance was increased according to the increase of the radiation field at the same amount of energy. In addition, the minimum distance was 60.4 cm when the 6 MeV electron beams were used with $6{\times}6$ cut-out blocks and the maximum distance was 87.2 cm when the 6 MeV electron beams were used with $20{\times}20$ cut-out blocks; thus, the largest difference between both of these was 26.8 cm. When comparing the before and after the using the $6{\times}6$ cut-out block, the difference between both was 8.2 cm in 6 MeV electron beam energy and was 2.1 cm in 20 MeV. Thus, the results showed that the difference was reduced according to an increase in the energy. In addition, in the comparative experiments performed by changing the size of the cut-out block at 6 MeV, the results showed that the source-skin distance was 8.2 cm when the size of the cut-out block was $6{\times}6$, 2.5 cm when the size of the cut-out block was $10{\times}10$, and 21.4 cm when the size of the cut-out block $15{\times}15$. In conclusion, it is recommended that the actual measurement is used for each energy and radiation field in the clinical dose measurement and for the measurement of the effective source-skin distance using cut-out blocks.

• 동력기계공학회지
• /
• 제13권1호
• /
• pp.33-38
• /
• 2009

In this study, the nose of cam in the automobile engine was modelled into circular disk to analyze the torsional vibration of the cam shaft. The distance between disks was fixed, but the diameter of disks was changed. The torsional vibration of the cam shaft was studied experimentally by the motion of the modelled disk with changing the disk diameter. And the sizes of the modelled disk were selected not to show the natural frequencies over all the experimental ranges. The torsional vibration meter used in this study has a laser system with non-contact measurement method, which can measure both torsional angular vibration velocity and torsional angular vibration displacement simultaneously. The Experimental analysis shows that the characteristics of the torsional vibration in the horizontal rotating shaft can be considerably affected by the arrangement of the modelled disks.