• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1411-1414
• /
• 1997

It is essential to obtain a distane informaion in order to completely execute assembly tasks such as a grasping and an insertion. In this paper, we propose a method estimating a measurement distance from a sensor to an object through using the omni-directional image sensing system for assembly(OISSA) and show its features and feasibility by a computer simulation. The method, utilizing a forwarded motion stereo technique, is simple to search the corresponding points and possible to immediatiely obtain a three-dimensional 2.pi.-shape information.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.279-282
• /
• 2017

마이크로소프트에서 게임용 자연스러운 사용자 인터페이스를 위해 개발된 깊이 카메라인 키넥트 깊이 측정 센서는 컴퓨터 비전 분야에 있어 매우 유용한 도구이다. 키넥트의 깊이 측정 센서와 그 높은 프레임률로 인해, 본 논문에서는 키넥트 카메라를 사용해 거리 측정 시스템을 개발하였으며, 이를 이동 시 인간과 같이 사물을 감지하는데 주변 환경을 인지하기 위해 시각 시스템이 필요한 무인 차량에 시험하였다. 즉, 키넥트 깊이 측정 센서를 이용해 가시 범위 내 사물을 감지하고 사물에서 시각 센서의 거리 측정 시스템을 개선한다. 감지된 사물을 정밀하게 확인하여 실제 사물인지, 또는 픽셀 노즈(nose)인지 판단해 실제 사물이 아닌 픽셀을 무시함으로써 처리 시간을 줄인다. 이미지 처리를 위한 오픈 CV 라이브러리와 함께 깊이 분할 기법을 활용하여, 키넥트 카메라의 가시 범위 내 사물을 확인할 수 있으며, 해당 사물과 센서 사이의 거리를 측정할 수 있다. 시험 결과에 따르면 본 시스템은 저가 범위 센서인 키넥트 카메라가 장착된 자율주행차에 사용하여 감지된 사물로부터 측정 거리에 이르면 어플리케이션 방식에 따라 프로세스를 처리할 수 있는 것으로 나타났다.

• 센서학회지
• /
• 제22권6호
• /
• pp.387-392
• /
• 2013

Camera rigs for shooting 3D video are classified as manual, motorized, or fully automatic. Even in an automatic camera rig, the process of Stereoscopic 3D (S3D) video capture is very complex and time-consuming. One of the key time-consuming operations is capturing the distance parameters, which are near distance, far distance, and convergence distance. Traditionally these distances are measured by tape measure or triangular indirect measurement methods. These two methods consume a long time for every scene in shot. In our study, a compact laser distance sensing system with long range distance sensitivity is developed. The system is small enough to be installed on top of a camera and the measuring accuracy is within 2% even at a range of 50 m. The shooting time of an automatic camera rig equipped with the laser distance sensing system can be reduced significantly to less than a minute.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.289-290
• /
• 2012

본 연구는 가속도 센서를 이용하여 이동거리를 측정하는 알고리즘을 개발하였다. 이 알고리즘은 사람의 키와 보폭이 상관관계가 있다는 특성을 이용하였다. 제안하는 알고리즘은 가속도 센서에서 측정되는 샐플링 데이터를 이용해 이동거리를 측정하였다. 그리고 가속도 크기의 변화에 따라 인자값 및 임계값을 적용하여 실제 이동거리와 측정된 이동거리의 오차를 8%미만의 결과를 도출하였다.

• 센서학회지
• /
• 제23권1호
• /
• pp.46-50
• /
• 2014

In this paper, we report a novel algorithm based on phase displacement, which supplements conventional TOF methods for distance measurement using an ultrasonic wave. The proposed algorithm roughly measures the distance between the transmission part and the receiving part by using the initial TOF. Thereafter, the precise distance is determined by measuring the phase displacement value between the synchronizing transmission signal and the signal obtained at the receiving end. A distance measurement experiment using a micrometer was performed to verify the accuracy of the ultrasonic wave sensor system. We found that the mean errors from the one adopting the distance measurement algorithm based on phase displacement varied from a minimum of 0.03 mm to a maximum of 0.09 mm. In addition, the standard deviation varied from a minimum of 0.04 mm to a maximum of 0.07 mm, thus giving a precision of ${\pm}0.1$ mm.

• 한국레이저가공학회지
• /
• 제12권2호
• /
• pp.11-16
• /
• 2009

A new profile measurement sensor was developed for remote laser welding robots. A stripe laser and a vision camera are used in the profile sensor. A simple sensor guided control scheme using the developed sensor is also introduced. The sensor can be used to guide the welding head in the remote welding application, where the working distance reaches to 450mm. In experiments, the profile measurement and the seam tracking were carried out using the developed sensor.

• 한국정보통신학회논문지
• /
• 제22권7호
• /
• pp.1009-1014
• /
• 2018

본 논문에서는 레이더 센서를 이용하여 센서와 물체 사이의 거리를 측정하는 시스템을 설계하고 구현하였다. 센서 모듈은 센서의 원시 데이터를 거리측정 시스템에 올려주고, 거리 측정 시스템에서는 표준편차와 평균값 필터를 이용하여 객체의 유무를 탐지하였다. 실험 결과에서는 평균값 필터를 이용한 알고리즘이 최대 거리 9.7m에서 최대 오차 0.02m 이내의 오차율로 사람이 측정되는 것을 확인하였으며, 표준편차를 이용한 알고리즘에서는 최대거리 9.7m에서 최대 오차 0.15m 이내의 오차율로 사람이 측정되는 것을 확인하였다. 따라서, 레이더 센서를 이용하여 거리를 측정할 경우, 표준편차를 이용한 방법보다는 평균값 필터를 이용하는 방법이 객체 탐지의 정확도가 높음을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1679-1684
• /
• 2004

This paper introduces a novel approach that can provide the three dimensional information on the movement of a spreader by using two CCD cameras and a laser distance sensor, which enables an ALS (Automatic Landing System) to be used for yard cranes at a harbor. So far a kind of 2D Laser scanner sensor or laser distance measuring units are used as corner detectors for the geometrical matching between the spreader and a container, which provides only 2D information which is not enough for an accurate and fast ALS system required presently. In addition to this deficiency in performance, the price for the system is too high to be adopted widely for the ALS. Therefore, to overcome these defects, a novel method to acquire the three dimensional information for the movement of a spreader including skew and sway angles is proposed using two CCD cameras and a laser distance sensor. To show the efficiency of proposed algorithm, real experiments are performed to show the accuracy improvement in distance measurement by fusing the sensory information of CCD camera and laser distance sensor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.281-284
• /
• 2004

This paper presents studies on the development of an internal measurement system for the footwear using laser sensor. The measurement system gains to the height of the profile at internal footwear. It accomplishes the 3-axises control which uses ball screws, L-M guides and stepping motors. It is used a laser sensor at the measurement of the distance, and Labview is used for the control and the measurement. We can get the profile through reverse engineering for the LAST. The data of profile is fixed a heigh of the LAST. Then, we try to verify as compare the profile with one which is collected by Internal measurement system..

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권1호
• /
• pp.23-28
• /
• 2004

This paper proposes a sensor-fusion technique where the data sets for the previous moments are properly transformed and fused into the current data sets to enable accurate measurement, such as, distance to an obstacle and location of the service robot itself. In the conventional fusion schemes, the measurement is dependent on the current data sets. As the results, more of sensors are required to measure a certain physical parameter or to improve the accuracy of the measurement. However, in this approach, instead of adding more sensors to the system, the temporal sequence of the data sets are stored and utilized for the measurement improvement. Theoretical basis is illustrated by examples and the effectiveness is proved through the simulations. Finally, the new space and time sensor fusion(STSF) scheme is applied to the control of a mobile robot in an unstructured environment as well as structured environment.