• 한국물환경학회지
• /
• 제21권2호
• /
• pp.158-168
• /
• 2005

In this study, the discharging effluents from have been 9 municipal wastewater treatment plants surveyed for 1 year-period. Statistics including probability distribution, cumulative occurrence concentration and other statistical parameters were presented. In addition, treatment performance and its stability were also discussed. Most of the plants, have an operational problem of high soluble organic content in the secondary effluent which may be associated with the integrated treatment of human and livestock manures. Nitrogen concentration in the effluents were usually higher during the period of summer and winter. It was found that this is mainly due to lack of the proper C/N ratio during the summer, or/and the effects of low temperature and less dilution by dry weather during the winter. Phosphorus concentration is sharply increased in June. Discussion with plant operators told that it is due to the dissolution of phosphate from the sludge accumulated in the primary settling tanks from the early spring to june. During this period, usually, sludge treatment line is highly overloaded with flush-outs of the sediments also stored in the bottom of combined sewer due to the low flow during winter season. Most of the plants can meet new effluent discharge limits of the nitrogen and phosphorus, and total coliform without further treatment.

• 한국분말재료학회지
• /
• 제22권6호
• /
• pp.391-395
• /
• 2015

We report on the successful fabrication of ZnO nanorod (NR)/polystyrene (PS) nanosphere hybrid nanostructure by combining drop coating and hydrothermal methods. Especially, by adopting an atomic layer deposition method for seed layer formation, very uniform ZnO NR structure is grown on the complicated PS surfaces. By using zinc nitrate hexahydrate $[Zn(NO_3)_2{\cdot}6H_2O]$ and hexamine $[(CH_2)_6N_4]$ as sources for Zn and O in hydrothermal process, hexagonal shaped single crystal ZnO NRs are synthesized without dissolution of PS in hydrothermal solution. X-ray diffraction results show that the ZnO NRs are grown along c-axis with single crystalline structure and there is no trace of impurities or unintentionally formed intermetallic compounds. Photoluminescence spectrum measured at room temperature for the ZnO NRs on flat Si and PS show typical two emission bands, which are corresponding to the band-edge and deep level emissions in ZnO crystal. Based on these structural and optical investigations, we confirm that the ZnO NRs can be grown well even on the complicated PS surface morphology to form the chestnut-shaped hybrid nanostructures for the energy generation and storage applications.

• Journal of Pharmaceutical Investigation
• /
• 제28권2호
• /
• pp.109-113
• /
• 1998

This study is purposed to develop the sustained release and bioavailability of piracetam (PA). The use of alginate beads as a means to achieve sustained release of piracetam was evaluated in comparison with that of piracetam alone. In the PA-sodium alginate(SA) beads was confirmed by differential scanning calorimetry thermogram(DSC), indicating a relative shift of an endometric peak of PA to higher temperature. The changes in dissolution rates from PA-SA beads and PASA beads coated by chitosan(CHO) were significantly slower than that of intact PA. The release rate of PA-SA in the gastric fluid was markedly decreased compared with that in the intestinal fluid, suggesting that PA is mostly released in the intestinal fluid. However, the PA/SA ratio scarcely affected the release profile. The blood concentration- time curves of PA, PA-SA and PA-SA-CHO were obtained by oral administration to rats. $T_{max}$ of PA, PA-SA and PA-SA-CHO were 1, 10 and 6 hours, respectively. It was confirmed that the release of PA was prolonged by the formulation of PA-SA beads and PA-SA-CHO beads.

• 분석과학
• /
• 제6권1호
• /
• pp.141-147
• /
• 1993

Fe-Ni-Mn-(Ti)계 마르에이징강을 용체화처리한 후 $400^{\circ}C$부터 $550^{\circ}C$ 사이에서 장시간 시효처리할 때 생성되는 역변태 오스테나이트의 거동을 투과전자현미경 및 분석전자현미경을 이용하여 관찰하였다. 시효온도와 시간에 따라 Widmanstatten, granular, lath-like 및 재결정 오스테나이트 등 4 종류의 역변태 오스테나이트가 관찰되었으며, 역변태 오스테나이트들은 기지조직인 마르텐사이트보다 많은 니켈과 망간을 함유하고 있었다. Widmanstatten과 lath-like 오스테나이트는 기지 조직과 일정한 방위관계를 이루고 있으며 방위관계는 시효조건과 합금조성에 따라 달라진다. 재결정 오스테나이트는 $550^{\circ}C$ 이상의 고온에서 시효할 때 생기지만 불안정하여 냉각시 다시 마르텐사이트로 변태되는 경우도 발견되었다.

• 열처리공학회지
• /
• 제13권3호
• /
• pp.177-182
• /
• 2000

The effects of betatizing and aging temperatures on the martensitic transformation characteristics in an Cu-13.4wt%Al-4.2wt%Ni single crystal have been studied. Microstructures show that the specimen betatized above $800^{\circ}C$ has only ${{\beta}_1}^{\prime}$ martensite while the specimen betatized of below $700^{\circ}C$ has two phases i.e., ${{\beta}_1}^{\prime}+{\gamma}_2$ When betatizing temperature increase from $600^{\circ}C$ upto $900^{\circ}C$, Ms and As temperatures decrease due to the dissolution of which ${\gamma}_2$ phase depletes Al content in the matrix thereafter makes the both Ms and As temperatures significantly increased. Ms and As temperatures of the specimen aged at $200^{\circ}C$ are relatively stable but those of the specimen aged at $300^{\circ}C$ are shifted rapidly with aging time, especially within the first 30min.

• 열처리공학회지
• /
• 제6권4호
• /
• pp.185-193
• /
• 1993

The effect and Condition of heat treatment on the tensile strength of welded joint was investigated in 300 grade 18% Ni-Co-Mo-Ti maraging steel sheets welded with electron beam. A good tensile strength of welded joint was obtained by following heat treatment cycle ; At $1100^{\circ}C$ the specimen was high temperature solution treated for 1 hour and then it was repeated solution treated at $900^{\circ}C$, $820^{\circ}C$ for 1 hour respectively to recrystallize the coarsened ${\gamma}$ grain. These heat treatment cycle was completed by an final aging heat treatment at $480^{\circ}C$ for 4 hour. Moreover, dissolution of dendrite, a significant decrease in seregation of Mo, Ti in weld metal were observed and also the coarsened ${\gamma}$ grain formed at $1100^{\circ}C$, $1200^{\circ}C$ changed to fine grain due to the effect of recrystallization.

• 한국재료학회지
• /
• 제18권8호
• /
• pp.438-443
• /
• 2008

SnO nanosheets were prepared at room temperature through a reaction between an aqueous solution of $SnCl_2$, $N_2F_4$, and NaOH and were converted into $SnO_2$ nanosheets without a morphological change. The SnO nanosheets were formed through a dissolution-recrystallization mechanism. Uniform and well-dispersed SnO nanosheets with the round-shape morphology were attained when the solution was treated by ultrasonic sound immediately after the addition of NaOH. The $SnO_2$ nanosheets prepared by means of solution reduction under the ultrasonic treatment, and subsequent oxidation at $600^{\circ}C$ showed a high level of gas sensitivity to $C_2H_5OH$ and $CH_3COCH_3$.

• 한국재료학회지
• /
• 제30권8호
• /
• pp.435-440
• /
• 2020

The relationship between the precipitation of secondary phase and the thermal properties of Al-4.5%Cu alloy (in wt.%) after various heat treatments has been studied. Solid solution treatment of alloy was performed at 808 K for 6 hours, followed by warm water quenching; then, the samples were aged in air at 473 K for different times. The thermal diffusivity of the Al-4.5%Cu alloy changed with the heat treatment conditions of the alloy at temperatures below 523 K. The as-quenched specimen had the lowest thermal diffusivity, and as the artificial aging time increased, the thermal diffusivity of the specimen increased in the temperature range between 298 and 523 K. For the specimen aged for five hours, the thermal conductivity was 12% higher than that of the as-quenched specimens at 298 K. It is confirmed that the thermal diffusivity and thermal conductivity of the Al-4.5%Cu alloy significantly depend on their thermal history at temperatures below 523 K. The precipitation and dissolution of the Al₂Cu phase were confirmed via DSC for the alloys, and the formation of coefficient of thermal expansion peaks in TMA was caused by precipitation. The precipitation of supersaturated solid solution of Al-4.5%Cu alloys had an additional linear expansion of ≈ 0.05 % at 643 K during thermal expansion measurement.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.172-176
• /
• 2006

Fe(III)-Coated Star Fish (ICSF) was prepared by reaction of calcined Star Fish (SF) with Fe(III) solution at an elevated temperature. To investigate the stability of ICSF at acidic condition, dissolution of Fe was studied at pH 2 as a function of time. Extracted iron was negligible over the entire reaction time. This stability test suggests the applicability of ICSF in the treatment of wastewater even at low pH. Adsorption capacity of Cu(II) onto SF and ICSF was investigated in a batch and a column test. In the pH-edge adsorption, adsorption of copper onto SF and ICSF was quite similar over the entire pH range due to the presence of an important amount of Fe in SF itself. From the adsorption isotherm obtained with variation of the concentration of Cu(II), ICSF showed 1.6 times greater adsorption capacity than SF. Also, ICSF showed a greater removal capacity of Cu(II) in the column test.

• 한국결정성장학회지
• /
• 제24권2호
• /
• pp.84-87
• /
• 2014

Separation/recovery of valuable metals such as zinc, nickel or tin from copper alloy dross has recently attracted from the viewpoints of environmental protection and resource recycling. In this study, preliminary investigation on separation of tin (Sn) from copper alloy dross using selective dissolution method was performed. The tin in the copper alloy dross did not dissolve in an aqueous nitric acid solution which could allow the concentration/separation of tin from the copper alloy dross. Precipitation of tin as $H_2SnO_3$ (meta stannic acid)occurred in the solution and transformed to tin dioxide ($SnO_2$) after drying process. The dried sample was heat-treated at low temperature and its crystal structure, surface morphology and chemical composition were investigated.