• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.91-97
• /
• 2002

Variation of HAZ toughness of Ti-containing steel with nitrogen content was investigated and interpreted in terms of its microstructure and the amount of soluble nitrogen present. The amounts of Ti and Al combined in TiN and AlN, respectively, in HAZ at $1400^{\circ}C$ peak temperature were less than those in base plate; 55~88% in TiN and 21~28% in AlN, indicating the dissolution of nitrifies in HAZ. The calculated amounts of soluble nitrogen using the thermodynamic analysis showed a good agreement with the measured values in other experiment. Therefore, the analysis can be used to estimate the amount of soluble nitrogen in HAZ. Simulated HAZ toughness was influenced not only by its microstructure but also by the amount of soluble nitrogen present after the formation of BN during the cooling cycle of welding. It showed maximum value when the nitrogen content is in stoichiometric ratio with titanium content, showing that soluble nitrogen in HAZ is detrimental to its toughness.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권2호
• /
• pp.199-208
• /
• 2017

We perform an experiment on lacquer formation with simple test device. The anti-lacquer is one of important issues to increase durability, and to improve performance in the engines because the lacquer formation cause sticking of fuel injection pump, scuffing of cylinder liners, and increase of lubricant oil consumption in the marine diesel engines. We suggest this simple test in order to save enormous experimental cost in marine diesel engines, and in order to have ease in performing the various tests. The influences of the Base Number (BN) of lubricant oils and the sulfur content of fuel oils in the formation of lacquer are investigated. In order to investigate physical and chemical properties of lacquer, we perform a variety of tests such as, visual inspection, EDS. In addition, we investigate adhesion of lacquer by pull-off test quantitatively, and perform dissolution test with dilute sulfuric acid.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.893-896
• /
• 2006

This study examined plant adhesion characteristics of the porous concrete that used specially treated granular fertilizer for field application, which was used for the restoration of the marine ecosystem. The results of the experiment showed that nutrient eruption amount, the destruction and dissolution ratio tended to decrease when the coating thickness was increased. The void ratio and compressive strength tended to decrease when the specially treated granular fertilizer mixing ratio was increased. According to these results, the appropriate thickness of coating for cement coated granular fertilizer was 1.0mm. The adhesion ability of marine plant to porous concrete was superior when the cement coated granular fertilizer was mixed. Therefore, the appropriate cement coated granular fertilizer mixing ratio of 20% with a coating thickness of 1.0mm is thought to be a factor when considering the strength of the porous concrete for marine ecosystem restoration and the adhesion characteristics of marine plant.

• Journal of Pharmaceutical Investigation
• /
• 제25권3호
• /
• pp.249-264
• /
• 1995

Although liposome has many advantages as a pharmaceutical dosage form, its application in the industrial field has been limited because of some problems such as preparation method, reproducibility, scale-up, stability and sterilization etc. Liposomes prepared by microemulsification method had defined size, narrow size distribution, reproducibility and high entrapment efficiency. For enhancing the stability, the dry form of liposome was recommended. These types of liposome are proliposome and freeze-dried liposome. The liposome must have some properties for preparing of freeze-dried liposome; small size $(50{\sim}200\;nm)$, narrow size distribution and cryoprotectant. In this experiment, the liposomes containing 5-Fluorouracil(5-FU) and its prodrug(pentyl-5-FU-1-acetate; PFA, hexyl-5-FU-1-acetate; HFA) were made with soybean phosphatidylcholine, cholesterol, stearylamine(SA) and dicetyl phosphate(DCP) employing hydration method or microemulsification method using $Microfluidizer^{TM}$. Both or liposome types were MLV and MEL. After preparation, freeze drying and rehydration were performed. In the process of freezing, trehalose(Tr) was added as a cryoprotectant. Their evaluation methods were as follows; entrapment efficiency, mean particle size and size distribution, dissolution test, retain of entrapment efficiency and turbidity after freeze-drying. The results are summarized as belows. The entrapment efficiency of 5-FU was dependent on total lipid concentration and cholesterol content but that of PFA and HFA was decreased when cholesterol was added. When DCP and SA were added, entrapment efficiency was decreased. As the partition coefficient of drug was increased, entrapment efficiency was increased. Under the same condition, entrapment efficiency of MEL is similar to that of MLV. The mean particle size and size distribution of MEL were smaller than those of MLV. Dissolution rates of drug from both liposome types were comparatively similar. Dissolution rates of drugs with serum and liver homogenate were faster than without these material. After preparation of liposome, free drug was removed efficiency by Dowex 50W-X4. When liposome was freeze-dried and then rehydrated in the presence of Tr, characteristics of liposome were maintained well in MEL than MLV. Tr Was used successfully as a cryoprotectant in the process of freeze drying and the optimal ratio of Tr:Lipid was 4:1(g/g).

• 자원환경지질
• /
• 제42권5호
• /
• pp.403-412
• /
• 2009

이산화탄소의 지중저장이 가능한 것으로 알려진 대염수층에서, 과임계이산화탄소 접촉에 의한 대표적 규산염 광물인 장석류의 지화학적 변화를 규명하기 위해 고압셀 실험을 실시하였다. 단일 시료광물인 사장석($[Ca:Na_2]O{\cdot}Al_2O_3{\cdot}2SiO_2$)과 정장석($KAlSi_3O_8$) 슬랩을 과임계이산화탄소를 형성하는 지중 조건을 재현한 고압셀 내부(100 bar, $50^{\circ}C$)에 고정시킨 후, 과임계이산화탄소와 30일 이상 반응시켰다. 고압셀 실험은 pH 8로 적정한 증류수(염수의 pH)를 포함한 과임계이산화탄소-염수-장석 반응과 염수를 제외한 과임계이산화탄소-장석 반응으로 구분하여 실시하였다. 반응 시간에 따른 장석의 표면 변화를 규명하기 위하여 광물 슬랩 평균 표면 거칠기 변화, 물 시료 내 용존 이온 변화, 반응 후 고압셀 내부에 형성된 침전물 성상을 규명하였다. 과임계이산화탄소-염수-장석 반응 실험 결과 사장석 표면의 평균 거칠기 값이 실험 전에는 0.118 nm에서 반응 30일 후에는 2.493 nm로 약 20배 이상 증가하였으며, 정장석 표면의 경우에도 표면 평균 거칠기 값은 0.246 nm에서 1.916 nm로 증가하였다. 이러한 표면 거칠기 변화는 SPM 이미지 사진에서도 관찰되어, 지중 대수층의 장석은 지중 주입된 과임계이산화탄소와 공극 내 존재하는 염수와 접촉하여 수 개월 이내에 용해/침전 반응이 진행될 것으로 판단되었다. 과임계이산화탄소에 의해 고압셀 내 물시료의 pH는 4로 떨어졌고, 사장석 슬랩 실험의 경우 물시료의 양이온 농도 분석 결과 $Ca^{2+}$와 $Na^+$ 농도가 75 mg/L, 50 mg/L로, 가장 많이 용해되는 것으로 나타났으며, 정장석의 경우 $Al^{3+}$, $K^+$, $Si^{+4}$, $Na^+$ 순으로 용존 이온 농도가 높았다. 고압셀 안에 침전된 고상 물질의 성분 분석결과 사장석 실험의 경우 Ca를 다량 함유한 무정형의 규산염 물질이었으며, 정장석의 경우에는 카올리나이트가 침전됨을 알 수 있었다. 염수를 제외한 과임계이산화탄소와 장석만을 반응시킨 셀실험의 경우에는 반응 시간에 따른 광물 표면의 평균 거칠기 값의 변화나 광물 표면의 용해현상도 거의 나타나지 않아, 물이 없는 환경에서 광물과 과임계이산화탄소와의 반응에 의한 광물의 상변화 정도는 현저하게 낮을 것으로 판단된다.

• 한국건설순환자원학회논문집
• /
• 제8권1호
• /
• pp.143-151
• /
• 2020

최근 자기치유 콘크리트의 연구가 활발히 진행되고 있으며, 구조물의 유지관리에 활용하기 위한 다양한 방법이 시도되고 있다. 하지만 자기치유 콘크리트의 기술적인 발전과는 달리, 성능을 평가하기 위한 방법은 불충분한 실정이다. 비록 표면관찰과 투수실험을 통해서 균열의 치유를 관찰하는 방법이 널리 실행되고 있지만, 현미경 관찰을 통한 표면관찰 방법은 국부적인 지점의 관찰은 전체적인 성능을 평가하기에는 불충분할 수 있으며, 투수실험의 경우에는 물질용출 및 점성으로 인한 손실을 고려해야 한다. 상기의 두 실험방법의 단점을 보완한 기체확산실험이 개발되었지만, 실제 치유가 발생한 시편을 대상으로의 검증은 이루어지지 않았다. 따라서 본 연구에서는 치유가 발생한 모르타르 시편에 대해 기체확산실험을 진행하였고, 기체확산실험에 의한 자기치유 평가의 적정성을 검증하였다.

• 자원환경지질
• /
• 제52권6호
• /
• pp.595-604
• /
• 2019

본 연구 목적은 비-가시성 금 정광을 마이크로웨이브-질산용출 시키고, 여과지를 이용하여 금을 단순하게 얻고자 하였다. 본 실험에서 사용된 시료의 경우 질산농도별로 마이크로웨이브-질산용출실험을 수행한 결과 Fe, Te, Ag 등은 완전용출(100%) 되었지만, Au는 용해되지 않았다. 용출용액을 3장의 여과지로 여과하여 SEM/EDS 분석한 결과 첫 번째, 두 번째 및 세 번째 여과지의 표면 및 단면 모두에서 Au가 검출되었다. 고체-잔류물이 포함된 여과지 3장을 모두 납-시금법에 사용한 결과 질산농도 모두에서 금 입자들이 회수되었다. 최대 금 입자(452.50g/t)가 얻어진 용출조건은 질산농도 6M에서 그리고 마이크로웨이브 조사시간 12분에서였다.

• The Korean Journal of Ecology
• /
• 제23권6호
• /
• pp.445-452
• /
• 2000

The effects of sludge and fertilizer application on germination and seedling growth of woody plants on heavy metal mine tailings were evaluated by greenhouse experiment. Two different mine tailings (Lead-zinc mine tailings from Kwangmyong, Kyonggi-do and tungsten mine tailings from Sangdong. Kangwon-do). four fertilizer treatments (N +P +K: 20, 40, 60, and 80 kg/m$^3$), and four sewage sludge treatments (5.5, 11, 22.5, and 45 Mg/m$^3$) were used in the experiment. Tested plants were Pinus densiflora, Larix leptolepis, Amorpha fruticosa, and Alnus hirsuta. There were three replicates for each treatment. In addition, vermiculite was used instead of mine tailings to determine the effect of physical amendments. Fifty seeds of a species were sown in a pot (upper diameter 13.5 cm, depth 10 cm) and seedling emergence were recorded daily for 30 days. The highest germination rate was 53% for all treatments. Germination rate of Larix leptolepis was lowest among the four species studied. One month later after seeding, seedlings were thinned and only 5 seedling were left in each pot, and fertilizer and sewage sludge were applied once again. Growth of seedlings were determined for 10 weeks since then. Most plants grew very poorly or died within 5 weeks on lead/zinc mine tailings from Kwangmyong. The analysis of heavy metal contents by the total dissolution method showed that heavy metals generally increased in the order of tungsten mine tailings from Sangdong < sewage sludge from Puchon < lead/zinc mine tailings from Kwangmyong. Growth of woody plants was improved significantly by the fertilizer treatments on tungsten mine tailings. In contrast. survival and growth of woody plants were not affected significantly by the sewage sludge treatment on both tailings. This study shows that fertilizer applied to established seeded stands may provide some benefits in terms of increased ground cover in the field. It is suggested that reclamation should be proceeded by the study of the physico-chemical and biological characteristics of mine tailings.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.77-81
• /
• 1992

The purpose of this research was th evaluate conductivity of electricity of Ge-Se-Bi system Chalcogenide glass as a amorphous semiconductor by observing its dissolution and crystallization. In this experiment. Ge-Se-Bi metal powder in the rage of $Ge_{12-25}$, $Se_{65-85}$, $Bi_{2.5-15}$ was used as the sample ore. The ore was. put into a vaccous quartz tube and then melted. The condition of heat treatment was to dispose it to $1000^{\circ}C$ heat for 10 hours and then rapidly quenched it at $3834^{\circ}C$/see. The crystallization of the fused sample ripened as the change of temperature and time, after the crystal core was formell. At that time it was possible to observe the state that $Bi_2Se_3$ and $GeSe_2$ were crystallized. In the experiment of making memberance, the memberance was produced by using the previously experimented bulk sample. And decrystalization was well progressed when Ge was over 15 at %, Se was over 70 at %, and Bi was under 10 at%. As for bulk. when Ge was fixed to 20 at %, the conducting of electricity was increased as Bi gained at %. In the case of memberance, the conductivity was much more increased than that of bulk sample as the increase of at the increase of at % of Bi. In the experiment on $Ge_{20}$, $Se_{77.5}$ and $Bi_{2.5}$, the crystallization sswas most vigorous when they were kept at $330^{\circ}C$ for 4 hours.

• Bulletin of the Korean Chemical Society
• /
• 제26권11호
• /
• pp.1783-1789
• /
• 2005

Modeling of a steam generator crevice in a nuclear power system needs to take into account both thermalhydraulic and chemical phenomena. As a first step towards developing a reliable model, a chemical equilibrium model was developed to predict chemical speciation in a magnetite-packed crevice by adopting the “tableau” method. The model was benchmarked with the available experimental data and the maximum deviation did not exceed two orders of magnitude. The developed model was applied to predict the chemical speciation in a magnetite-packed crevice. It was predicted that caustic environment was developed by the concentration of NaOH and the dissolution of magnetite. The model indicated that the dominant aqueous species of iron in the caustic crevice was $FeO_2\;^-$. The increase of electrochemical corrosion potential observed in the experiment was rationalized by the decrease of dissolved hydrogen concentration due to a boiling process. It was predicted that under the deaerated condition magnetite was oxidized to hematite.