• Title/Summary/Keyword: dissipation

Search Result 3,468, Processing Time 0.031 seconds

Analysis on Foaming Properties of the PANI added MWNT/PU Films (PANI 첨가 MWNT/PU 필름의 발포특성)

  • Ma, Hye-Young;Choi, La-Hee;Park, Mi-Ra;Kim, Seung-Jin
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2012.03a
    • /
    • pp.63-63
    • /
    • 2012
  • 전자제품 패키지에 요구되는 쿠션성과 정전방전 기능을 갖는 폴리우레탄 발포 필름의 제조기술을 확립하게 되면 IT산업용에 적용 가능한 필름제품이 개발되어 ESD(정전방전, Electrostatic Dissipation) 성능을 발휘하게 됨으로서 정전기 쇼크에 의한 각종 전자제품의 오작동이나 파손 방지가 가능하게 되어 포장재, 자동차 전자제품의 하우징 등으로 사용될 수 있게 된다. 전도성 고분자인 Polyaniline (PANI)은 다른 여러 고분자와 비교하여 볼 때 다른 유형의 전도성 고분자보다 합성하기가 쉽고 높은 전기전도도를 보임은 물론 열적 및 대기 안정성이 우수하며 가격이 저렴한 장점을 가지고 있다. 본연구는 CNT 나노기술을 응용한 IT산업용 적층간지용 ESD PU발포필름의 제조 가공기술 및 상품화 개발을 수행하고자 방수, 투습방수성을 가지는 유연재료인 폴리우레탄(PU)의 1액형 PU와 DMF에 PANI의 함량을 5, 10, 15, 20, 25, 30wt%로 변화시켜 제조한 PANI/DMF 분산용액과 IPA/MWNT 3wt% 분산용액의 혼용비에 변화를 주어 $120^{\circ}C$에서 2분 건조시켜 그라운드 필름을 제조하였다. 그리고 2액형 PU와 IPA/MWNT 3wt% 분산용액과 발포제를 사용하여 발포온도 $150^{\circ}C$에서 5분간 건조시켜 발포필름을 제조하였으며 이들의 전기적 특성과 역학적 특성을 조사하였다. 제조된 필름의 전기전도성은 전기저항측정기 KEITHLEY 8009를 사용하여 부피저항과, 표면저항을 각각 측정하여 확인하였으며, 필름의 마찰 대전압은 E.S.T-7 마찰 대전압 시험기를 이용하여 표면 마찰 대전압을 측정하여 확인하고, 필름의 물리적 특성은 인장시험기를 이용하여 breaking stress, breaking strain을 측정하였다. 필름단면의 CNT 발포특성은 주사전자현미경(SEM)을 사용하여 측정하여 발포특성과 물성과의 연관성을 확인하였다. 그 결과 필름의 전기적 특성은 PANI가 30% 함량일 때 전반적으로 낮은 저항값이 측정되었으며, 마찰대전압을 측정한 결과 대부분의 시료가 0에 가까운 낮은 값을 가졌다. 필름의 물리적 인장특성은 PANI가 10wt%의 함량일 때 가장 높은 절단강도를 가졌으며 분산용액의 혼용비에 따른 경향성은 나타나지 않았다. 필름의 단면형상을 확인하여 발포특성을 분석한 결과 PANI의 함량에 따라 발포 cell의 크기는 뚜렷한 경향성을 보이지 않았으나 30wt%의 PANI/DMF 분산용액 20part(gr)와 3wt% IPA/MWNT 분산용액 40part(gr)로 제조한 시료의 cell이 가장 균일하고 고르게 발포되었으며, 3.90E+06ohm으로 가장 낮은 표면저항 값으로 측정되어 가장 좋은 전기전도성을 가짐을 확인하였다.

  • PDF

Inositol 1,4,5-Trisphosphate-induced Increase in $Ca^{2+}-ATPase$ Activity in the Microsomes of Tracheal Epithelial Cells

  • Cho, Hyoung-Jin;Park, Sung-Shin;Kim, Young-Kee
    • The Korean Journal of Physiology
    • /
    • v.29 no.2
    • /
    • pp.269-277
    • /
    • 1995
  • Membrane vesicles were prepared by differential centrifugation from epithelial cells of porcine trachea. Total activity of microsomal ATPases was measured spectrophotometrically by a coupled enzyme assay. The steady-state activity of the enzyme was $329{\pm}10$ nmol/min mg protein. Thapsigargin, a specific antagonist of intracellular $Ca^{2+}-ATPase$, inhibited about 50% of the activity, leaving $178{\pm}18\;nmol/min .mg$ protein (n=6), indicating that the $Ca^{2+}-ATPase$ is one of the major microsomal ATPases. The microsomes used in this study appeared to be tight-sealed vesicles since they showed saturation in $^{45}Ca^{2+}$ uptake experiments. Inositol 1,4,5-trisphosphate $InsP_{3}, 4\;{\mu}M$, an agonist of $InsP_{3}$-sensitive $Ca^{2+}$ release channel ($InsP_{3}$, receptor), and Ca-ionophore A23187 $(10\;{\mu}M)$ induced $^{45}Ca^{2+}$ releases of 20% and 50% of stored $^{45}Ca^{2+}$, respectively. The addition of $(10\;{\mu}M\;InsP_{3}$ also increased the microsomal ATPase activity from $282{\pm}8$ nmol/min mg protein to $334{\pm}21$ nmol/min . mg protein in the intact vesicles. Similar increase in the activity was observed by making microsomes leaky (uncoupling) using the Ca-ionophore A23187. ;$InsP_{3}-induced$ effects were blocked by either thapsigargin or heparin suggesting that: 1) the $InsP_{3}-induced$ increase in ATPase activity is mediated by microsomal $Ca^{2+}-ATPase$, and 2) dissipation of $Ca^{2+}$ gradient across the microsomal membrane is responsible for the $InsP_{3}-induced$ effect. In order to test the dependence of the $Ca^{2+}-ATPase$ activity on the activity of $InsP_{3}-induced$ the activity of ATPases was monitored in various concentrations of free $Ca^{2+}$ using $EGTA-Ca^{2+}$ buffers. The $Ca^{2+}$-dependent biphasic change is the well-known character of $InsP_{3} receptor but not of microsomal $Ca^{2+}-ATPase$ in non-excitable cells; however, the activity of microsomal ATPase appeared biphasic and a maxim진 activity of $397{\pm}36nmol/min\;.mg$ protein was obtained in the solution containing 100 nM free $Ca^{2+}$. Below or above this concentration, the activity of ATPases was lower. These results strongly support a positive correlation of microsomal $Ca^{2+}-ATPase$ to the $InsP_{3}$ receptors in epithelial microsomes.

  • PDF

A Mechanistic Study on the Early Stage-Events Involved in Low Temperature Stress in Clamydomonas reinhardtii (Clamydomonas reinhardtii의 냉해 초기과정에 관한 기작론적 연구)

  • Cho, Hyun-Soon;Kim, Chang-Sook;Jung, Jin
    • Applied Biological Chemistry
    • /
    • v.37 no.6
    • /
    • pp.433-440
    • /
    • 1994
  • The exposure of Clamydomonas reinhardtii to low temperatures resulted in an accumulation of cellular pyruvate that dissipated when the chilled cells returned to ambient temperature. The dissipation of pyruvate accumulation was accompanied by an increase in the production level of superoxide radicals $(O_2^-)$ in cells. The formation of $O_2^-$ at an excessive level during the post-chilling period was apparently countered by a substantial activation of superoxide dismutase (SOD). All these results are similar to those observed previously in rice seedlings subjected to the cold-treatment, implicating that a common mechanism is probably underlying for the primary processes of chilling injury both in higher plants and in algae. It was also observed that the activation of Mn-containing SOD contributes the major share in the increase of SOD activity of whole algal cells. Because Mn-SOD is present only in mitochondria, the observation corroborates the concept that the $O_2^-$ scavenging enzyme would be induced to cope with the cold treatment-caused adverse situation in mitochondria where the toxic active oxygen is produced at rates far exceeding the normal rate.

  • PDF

Design, Fabrication and Evaluation of a Conduction Cooled HTS Magnet for SMES (SMES용 전도냉각형 고온초전도 자석의 설계, 제작 및 평가)

  • Bae, Joon-Han;Kim, Hae-Jong;Seong, Ki-Chul
    • Journal of Energy Engineering
    • /
    • v.20 no.3
    • /
    • pp.185-190
    • /
    • 2011
  • This paper describes design, fabrication, and evaluation of the conduction cooled high temperature superconducting (HTS) magnet for superconducting magnetic energy storage (SMES). The HTS magnet is composed of twenty-two of double pancake coils made of 4-ply conductors that stacked two Bi-2223 multi-filamentary tapes with the reinforced brass tape. Each double pancake coil consists of two solenoid coils with an inner diameter of 500 mm, an outer diameter of 691 mm, and a height of 10 mm. The aluminum plates of 3 mm thickness were arranged between double pancake coils for the cooling of the heat due to the power dissipation in the coil. The magnet was cooled down to 5.6 K with two stage Gifford McMahon (GM) cryocoolers. The maximum temperature at the HTS magnet in discharging mode rose as the charging current increased. 1 MJ of magnetic energy was successfully stored in the HTS magnet when the charging current reached 360A without quench. In this paper, thermal and electromagnetic behaviors on the conduction cooled HTS magnet for SMES are presented and these results will be utilized in the optimal design and the stability evaluation for conduction cooled HTS magnets.

Residual Characteristics of Bistrifluron and Fluopicolide in Korean Cabbage for Establishing Pre-Harvest Residue Limit (생산단계 잔류허용기준 설정을 위한 엇갈이배추 중 bistrifluron과 fluopicolide의 잔류 특성 연구)

  • Lee, Dong Yeol;Jeong, Dong Kyu;Choi, Geun-Hyoung;Lee, Deuk-Yeong;Kang, Kyu Young;Kim, Jin Hyo
    • The Korean Journal of Pesticide Science
    • /
    • v.19 no.4
    • /
    • pp.361-369
    • /
    • 2015
  • This study investigated residual characteristics of bistrifluron and fluopicolide in Korean cabbage, and suggested the pre-harvest residue limits (PHRLs) based on their dissipation patterns and biological half-lives. The pesticides were sprayed on Korean cabbage in two different region under greenhouse conditions at the recommended dose, respectively. The samples for residue analysis were harvested at 0 (2 hr), 1, 2, 4, 6, 8 and 10 days after treatment, and analyzed by HPLC after clean-up with Florisil SPE. The limit of quantification (LOQ) was $0.03mg\;kg^{-1}$ for bistrifluron and fluopicolide, and the recoveries ranged from 87.2-110.6% with below 5% of RSD. The biological half-lives of field I and field II were 3.9 and 4.2 days for bistrifluron and 4.9 and 4.2 days for fluopicolide, respectively. The PHRL of bistrifluron and fluopicolide were recommended as 3.83 and $3.23mg\;kg^{-1}$ for 10 days before harvest, respectively.

The Role of Resveratrol in Lipid Metabolism: A Systematic Review of Current Basic and Translational Evidence (레스베라트롤의 지질 대사 효과에 대한 체계적 문헌 고찰)

  • Choi, Seung Kug;Moon, Hyun-Seuk
    • Journal of Food Hygiene and Safety
    • /
    • v.31 no.2
    • /
    • pp.67-73
    • /
    • 2016
  • Resveratrol is a non-flavonoid polyphenol which belongs to the stilbenes group and is naturally generated in several plants in response to damage or fungal invasion. It has been shown in published studies that resveratrol has an anti-adipogenic effect. A good consensus regarding the involvement of a down-regulation of $C/EBP{\alpha}$ and $PPAR{\gamma}$ in this effect has been reached. In addition, different metabolic pathways involved in triacylglycerol metabolism in white adipose tissue have been shown to be regulated by resveratrol. Concerning lipolysis, though this compound in itself seems to be unable to cause lipolysis, it increases lipid mobilization stimulated by ${\beta}-adrenergic$ agents. The increase in brown adipose tissue thermogenesis, and accordingly the associated energy dissipation, can attribute to accounting for the body-fat reducing effect of resveratrol. Besides its effects on adipose tissue, resveratrol can also acts on other organs and tissues. Therefore, it increases mitochondrial biogenesis and accordingly fatty acid oxidation in skeletal muscle and liver. This effect can also attribute to the body-fat reducing effect of this molecule. The present review purposes to collect the evidence concerning the potential mechanisms of action which underlie the anti-obesity effects of resveratrol, acquired either in cultured cells lines and animal models.

A Numerical Analysis of Flow Characteristics in a Heat Recovery Steam Generator with the Change of Inlet Flow Conditions (배열회수보일러(HRSG)의 입구유동 경계조건에 따른 유동특성 변화에 관한 연구)

  • Kim, Tae-Kwon;Lee, Boo-Yoon;Ha, Ji-Soo
    • Journal of the Korean Institute of Gas
    • /
    • v.15 no.3
    • /
    • pp.53-57
    • /
    • 2011
  • The present study has been carried out to analyze the flow characteristics of a heat recovery steam generator with the change of inlet flow conditions by using numerical flow analysis. The inlet of HRSG corresponds the outlet of gas turbine exit and the flow after gas turbine has strong swirl flow and turbulence. The inlet flow condition of HRSG should be included the exit flow characteristics of gas turbine. The present numerical analysis adopted the flow analysis result of gas turbine exit flow as a inlet flow condition of HRSG analysis. The computational flow analysis result of gas turbine exit shows that the maximum axial velocity appears near circular duct wall and the maximum turbulent kinetic energy and dissipation rate exist relatively higher gradient region of axial velocity. The comparison of flow analysis will be executed with change of inlet turbulent flow condition. The first case is using the inlet turbulent properties from the result of computational analysis of gas turbine exit flow, and the second case is using the assumed turbulent intensity with the magnitude proportional to the velocity magnitude and length scale. The computational results of flow characteristics for two cases show great difference especially in the velocity field and turbulent properties. The main conclusion of the present study is that the flow inlet condition of HRSG should be included the turbulent properties for the accurate computational result of flow analysis.

Flow Noise Analysis of Hull Appendages Using Lattice Boltzmann Method (격자 볼츠만 기법을 이용한 선체 부가물 유동소음해석)

  • Yeo, Sang-Jae;Hong, Suk-Yoon;Song, Jee-Hun;Kwon, Hyun-Wung
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.26 no.6
    • /
    • pp.742-750
    • /
    • 2020
  • The flow noise generated by hull appendages is directly related to the performance of the sonar in terms of self-noise and induces a secondary noise source through interaction with the propeller and rudder. Thus, the noise in the near field should be analyzed accurately. However, the acoustic analogy method is an indirect method that is not used to simulate the propagation of an acoustic signal directly; therefore, diffraction, reflection, and scattering characteristics cannot be considered, and near-field analysis is limited. In this study, the propagation process of flow noise in water was directly simulated by using the lattice Boltzmann method. The lattice Boltzmann method could be used to analyze flow noise by simulating the collision and streaming processes of molecules, and it is suitable for noise analysis because of its compressibility, low dissipation rate, and low dispersion rate characteristics. The flow noise source was derived using Reynolds-averaged Navier-Stokes equations for the hull appendages, and the propagation process of the flow noise was directly simulated using the lattice Boltzmann method by applying the developed flow-acoustic boundary conditions. The derived results were compared with Ffowcs Williams-Hawkings results and hydrodynamic pressure results based on the receiver location to verify the usefulness of the lattice Boltzmann method within the near-field range in comparison with other techniques.

Physiological Responses and Lactation to Cutaneous Evaporative Heat Loss in Bos indicus, Bos taurus, and Their Crossbreds

  • Jian, Wang;Ke, Yang;Cheng, Lu
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.28 no.11
    • /
    • pp.1558-1564
    • /
    • 2015
  • Cutaneous evaporative heat loss in Bos indicus and Bos taurus has been well documented. Nonetheless, how crossbreds with different fractional genetic proportions respond to such circumstances is of interest. A study to examine the physiological responses to cutaneous evaporative heat loss, also lactation period and milk yield, were conducted in Sahiwal (Bos indicus, n = 10, $444{\pm}64.8kg$, $9{\pm}2.9years$), Holstein Friesian (Bos taurus, HF100% (n = 10, $488{\pm}97.9kg$, $6{\pm}2.8years$)) and the following crossbreds: HF50% (n = 10, $355{\pm}40.7kg$, $2{\pm}0years$) and HF87.5% (n = 10, $489{\pm}76.8kg$, $7{\pm}1.8years$). They were allocated so as to determine the physiological responses of sweating rate (SR), respiration rate (RR), rectal temperature (RT), and skin temperature (ST) with and without hair from 06:00 h am to 15:00 h pm. And milk yield during 180 days were collected at days from 30 to 180. The ambient temperature-humidity-index (THI) increased from less than 80 in the early morning to more than 90 in the late afternoon. The interaction of THI and breed were highly affected on SR, RR, RT, and ST (p<0.01). The SR was highest in Sahiwal ($595g/m^2/h$) compared to HF100% ($227g/m^2/h$), and their crossbreds both HF50% ($335g/m^2/h$) and HF87.5% ($299g/m^2/h$). On the other hand, RR was higher in HF87.5% (54 bpm) and both HF100% (48 bpm) and HF50% (42 bpm) than Sahiwal (25 bpm) (p<0.01). The RT showed no significant differences as a result of breed (p>0.05) but did change over time. The ST with and without hair were similar, and was higher in HF100% ($37.4^{\circ}C$; $38.0^{\circ}C$) and their crossbred HF50% ($35.5^{\circ}C$; $35.5^{\circ}C$) and HF87.5% ($37.1^{\circ}C$; $37.9^{\circ}C$) than Sahiwal ($34.8^{\circ}C$; $34.8^{\circ}C$) (p<0.01). Moreover, the early lactation were higher at HF100% (25 kg) and 87.5% (25 kg) than HF50% (23 kg) which were higher than Sahiwal (18 kg) while the peak period of lactation was higher at HF100% (35 kg) than crossbreds both HF87.5% and HF50% (32 kg) which was higher than Sahiwal (26 kg) (p<0.05). In conclusion, sweating and respiration were the main vehicle for dissipating excess body heat for Sahiwal, HF and crossbreds, respectively. The THI at 76 to 80 were the critical points where the physiological responses to elevated temperature displayed change.

Nighttime Cooling Is an Effective Method for Improving Milk Production in Lactating Goats Exposed to Hot and Humid Environment

  • Sunagawa, Katsunori;Nagamine, Itsuki;Kamata, Yasuhiro;Niino, Noriko;Taniyama, Yoshihiko;Kinjo, Kazuhide;Matayoshi, Ayano
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.28 no.7
    • /
    • pp.966-975
    • /
    • 2015
  • Heat production in ruminants follows a diurnal pattern over the course of a day peaking 3 hours following afternoon feeding and then gradually declining to its lowest point prior to morning feeding. In order to clarify the cooling period most effective in reducing decreases in feed intake and milk production, experiments were carried out based on the diurnal rhythm of heat production and heat dissipation. In experiment 1, the effects of hot environment on milk production were investigated. The animals were kept first in a thermoneutral environment ($20.0^{\circ}C$, 80.0%) for 12 days, they were then transitioned to a hot environment ($32^{\circ}C$, 80.0%) for 13 days before being returned to second thermoneutral environment for a further 12 days. In experiment 2, the effectiveness of daytime cooling or nighttime cooling for improving milk production in hot environment was compared. While ten lactating Japanese Saanen goats (aged 2 years, weighing 41.0 kg) during early lactation were used in experiment 1, ten lactating goats (aged 2 years, weighing 47.5 kg) during mid-lactation were used in experiment 2. The animals were fed 300 g of concentrated feed and excessive amounts of crushed alfalfa hay cubes twice daily. Water was given ad libitum. The animals were milked twice daily. When exposed to a hot environment, milk yield and composition decreased significantly (p<0.05). Milk yield in the hot environment did not change with daytime cooling, but tended to increase with nighttime cooling. Compared to the daytime cooling, milk components percentages in the nighttime cooling were not significantly different but the milk components yields in the nighttime cooling were significantly higher (p<0.05). The results indicate that nighttime cooling is more effective than daytime cooling in the reduction of milk production declines in lactating goats exposed to a hot environment.