• Journal of Pharmaceutical Investigation
• /
• 제37권1호
• /
• pp.1-5
• /
• 2007

Solid dispersions of piroxicam were prepared by melting method using poloxamer as a carrier. The results of DSC and XRD studies showed that the amorphous farm of piroxicam coexisted with the crystalline form in the solid dispersions. However, the ratio of crystalline form of piroxicam in the solid dispersion prepared by melting method decreased in comparison with the same ratio of the solid dispersion prepared by solvent method. As the ratio of poloxamer in the solid dispersion increased, the ratio of the amorphous form of piroxicam in the solid dispersion increased. The dissolution rate of piroxicam from the solid dispersions was significantly higher than that from piroxicam powder. In comparison to the solid dispersion prepared by solvent method, the dissolution rate of piroxicam from the solid dispersion prepared by melting method was higher. As the ratio of poloxamer in the solid dispersion prepared by melting method increased, the initial dissolution rate decreased, however, the total amount dissolved at the end of the study increased.

• 한국실내디자인학회논문집
• /
• 제17호
• /
• pp.60-64
• /
• 1998

The results of simulation on greenery ratio using CG are as follows: arrangement type of optimal condition and greenery ratio were summarized as below as dispersion type and 5% ratio greenery for 20 pairs of assessment items and these assessment items were classified into 5 factors as a result of factor analysis,. These factors were Harmony Animation Atmosphere texture Peculiarity. Verification results of factors differences according to each condition can be. there was no apparent difference among factors in accordance with gender, In case of arrangement type dispersion type was higher than concentration type in all factors. Based on the above results dispersion type was assessed higher than concentration type the most suitable condition of Harmony Factor was 5% dispersion type Animation Factor was 5% dispersion type Animation Factor was 7% dispersion type Atmosphere Factor was 10% dispersion type Texture Factor was 5% concentration type and $\ulcorner$Peculiarity Factor$\lrcorner$was 7% concentration type.

• 한국항행학회논문지
• /
• 제28권1호
• /
• pp.123-128
• /
• 2024

전체 전송 거리의 중간에서 위상 공액파로 반전시키는 MSSI (mid-span spectral inversion)을 분산 제어 링크에 결합시키면 색 분산과 비선형 효과에 의한 파장 분할 다중 (WDM; wavelength division multiplexed) 신호의 왜곡 보상에 매우 효과적이다. 이러한 MSSI 결합 분산 제어 링크에서 분산 맵의 모양, 채널의 데이터율, 채널 파장과 파장 간격 등은 보상 정도에 영향을 미치고, 결과적으로 WDM 신호의 전송 거리와 용량을 결정하게 한다. 본 논문에서는 MSSI 결합 분산 제어 링크에서 WDM 신호를 구성하는 RZ (return-to-zero) 펄스의 소광비에 따른 보상 특성을 분석하였다. 시뮬레이션 결과 소광비가 커질수록 '1'과 '0' 신호의 전력 차이가 증가하여 수신 성능이 좋아지는 일반적인 광전송 시스템에서의 결과가 아닌 분산 맵의 형태와 분산 맵의 구체적 모양을 결정하는 광섬유 스팬 당 잉여 분산의 크기에 따라 최상의 보상을 얻을 수 있는 소광비가 결정되어야 한다는 것을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.445-452
• /
• 2001

Generally, OPC(ordinary portland cement) is used for grouting in Korea, and bentonite has usually been added to prevent the deposition of cement particles. The dispersion of CB(cement bentonite) grout is influenced by variable factors i.e. water to cement ratio, particle size of cement, kind of bentonite, adding volume, methods of adding, viscosity of CB grout materials and curdling time. Among variable factors, the viscosity of CB grout materials is influenced by the dispersion, and dispersion is improved as increasing the mixing speed. In this paper, described a suitable mixing speed of the High Speed Mixer in field, engineering characteristics of CB grout materials vary with the water to cement ratio and the mixing speed as well as confirming the state of dispersion.

• 한국광학회지
• /
• 제10권2호
• /
• pp.169-173
• /
• 1999

광증폭 중계방식의 10 Gb/s 광링크에서 신호의 광학적 신호대 잡음비 및 색분삭 보상에 따른 아이 마진 특성을 실험적으로 조사하였다. 실험 결과 시스템 적용을 위해서는 최소한 25dB 이상의 광학적 신호대 잡음비가 요구됨을 알 수 있었다. 그리고 단일모드 광섬유에서 발생하는 색분산을 보상하기 위해 송신기의 프리 처핑과 색분산 보상용 광섬유를 함께 사용하는 광링크에서 잉여 색분산이 0∼+935ps/nm인 경우 최적의 아이 열림과 수신감도를 얻을 수 있었다.

• 한국항행학회논문지
• /
• 제14권6호
• /
• pp.831-837
• /
• 2010

광 시간 분할 다중/파장 분할 다중 (OTDM/WDM; optical time division multiplexing/wavelength division multiplexing) 전송 시스템의 구현을 위한 40 Gbps RZ 형식의 최적 조건을 충격 계수 (duty cycle)와 소광비 (ER; extinction ratio)에 따른 성능 분석과 비교를 통해 도출하였다. 광전송 링크에는 광섬유의 색 분산과 비선형에 의한 신호 왜곡을 보상하기 위해 광 위상 공액기 (OPC; optical phase conjugator)와 inline 분산 제어 (DM; dispersion management)가 적용되었다. ER에 따른 시스템 성능 변화의 영향이 적으면서 동시에 OTDM에 의한 160 Gbps 신호로의 다중화에 적합한 충격 계수는 0.25이라는 것을 확인하였다. 또한 DM의 적용에 있어 중계 거리 당 잉여 분산 (RDPS; residual dispersion per span)을 크게 할수록 동일한 전체 잉여 분산 (NRD; net residual dispersion)에 의해 결정되는 RZ 형식의 성능 개선 정도를 증가시킬 수 있는 것을 알 수 있었다.

• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.901-908
• /
• 1996

The oil-based magnetic fluids were prepared with synthesized ultrafine magnette by allowing surfactactants such as sodium oleate and aliquat 336 to adsorb on the surface of magnetite particles. The dispersion ratio of oil-based magnetic fluids was higher than 90% when the amount of sodium oleate and aliqua 336 were more than 2.63$\times$10-2 mol and 6.56$\times$10-3 mol for 20g of magnetite respectively. The dispersion ratio of oil-based magnetic fluids with the amount of secondary surfactant addition was higher than 90% when oil-based magnetic fluids were prepared with aliquat 336 of cationic type. However oil-based magnetic fluids prepared with surfactants of anionic and nonionic type showed lower dispersion than whose with cationic surfac-tants.

• Journal of Mechanical Science and Technology
• /
• 제17권7호
• /
• pp.1054-1062
• /
• 2003

The numerical simulations of flow and pollutant particle dispersion are described for two-dimensional bell shaped hills with various aspect ratios. The Reynolds-averaged incompressible Navier-Stokes equations with low Reynolds number $\kappa$-$\varepsilon$ turbulent model are used to simulate the flowfield. The gradient diffusion equation is used to solve the pollutant dispersion field. The code was validated by comparison of velocity, turbulent kinetic energy, Reynolds shear stress, speed-up ratio, and ground level concentration with experimental and numerical data. Good agreement has been achieved and it has been found that the pollutant dispersion pattern and ground level concentration have been strongly influenced by the hill shape and aspect ratio, as well as the location and height of the source.

• Carbon letters
• /
• 제23권
• /
• pp.55-62
• /
• 2017

We report on the dispersion state of partially reduced graphene oxide (PRGO) in organic solvents, namely methyl ethyl ketone, ethyl acetate, methylene chloride, toluene, and xylene, by controlling the carbon to oxygen (C/O) atomic ratio of the PRGOs. A two-phase solvent exchange method is also proposed to transfer PRGO from water to an aprotic solvent, such as methyl ethyl ketone. We achieve relatively good dispersion in aprotic and non-polar solvents by controlling the C/O atomic ratio of the PRGOs and applying the two-phase solvent exchange method. There is an increase in the glass transition temperatures with the dispersion of PRGOs into amorphous polymers, in particular a $4.4^{\circ}C$ increase for poly(methyl methacrylate) and $3.0^{\circ}C$ increase for polycarbonate. Good dispersion of PRGO in a nonpolar polymer, such as linear low density polyethylene, is also obtained.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.59-60
• /
• 2021

To measure the effect of the stress-strain dispersion across the installed waterproofing layer on the concrete surface, a strain gauge was attached to the gap between the waterproofing layer and the concrete structure at specified points of upper, center and bottom of the load-displacement simulation specimen, and the peak stress-strain at the displacement interface were measured and compared with stress-strain at other areas to analyze each material types' stress-strain dispersion ratio properties. Based on the results of the testing, it was shown that materials with high load-displacement resistance performance accordingly had high stress-strain dispersion ratio results, and the materials from highest performance to lowest performance were; CAS, SAS, PUC and CSC.