• Industrial Engineering and Management Systems
• /
• 제12권2호
• /
• pp.112-117
• /
• 2013

The $\overline{x}$ control chart for the process mean and either the R or s control chart for the process dispersion have been used together to monitor the manufacturing processes. However, it has been pointed out that this procedure is flawed by a fault that makes it difficult to capture the behavior of process condition visually by considering the relationship between the shift in the process mean and the change in the process dispersion because the respective characteristics are monitored by an individual control chart in parallel. Then, the ($\overline{x}$, s) control chart has been proposed to enable the process managers to monitor the changes in the process mean, process dispersion, or both. On the one hand, identifying which process parameters are responsible for out-of-control condition of process is one of the important issues in the process management. It is especially important in the ($\overline{x}$, s) control chart where some parameters are monitored at a single plane. The previous literature has proposed the multiple decision method based on the statistical hypothesis tests to identify the parameters responsible for out-of-control condition. In this paper, we propose how to identify parameters responsible for out-of-control condition using the information criterion. Then, the effectiveness of proposed method is shown through some numerical experiments.

• 전자공학회논문지D
• /
• 제34D권11호
• /
• pp.54-63
• /
• 1997

The 1-D finite-element mehtod is applied for designing double-clad otpical fibers with dispersion-compensation capability. design parameters allowing only a $LP_{01}$ single mode are treated and macro-bending loss are taken into consideration. Design parameters are extracted to have the compensation ratio $(L_{SMF}/L_{DCF})$ of 6.2 for core structure with step-index profile, and of 5.2 for core with triangular-index profile.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.246-256
• /
• 2010

This study studies on the physical property of MWNT/PU composite film for electrostatic dissipation (ESD) function by dispersing multi-wall carbon nanotubes (MWNT) in dimethylformamide (DMF) and by combining it with polyurethane(PU). For this purpose, four kinds of MWNT were selected and the composite films were made by dispersion processing, and their physical properties were measured and investigated in terms of electrical conductivity. For dispersion parameters, four MWNT contents(0.5, 1, 2, 5wt%) and two dispersion times(30min, 120min) were selected. The dispersion property and the electrical conductivity of MWNT/PU film was measured using a UV-Vis spectrometer and conductivity measuring apparatus. Finally, their physical properties according to the dispersion conditions were analyzed and discussed with various processing conditions.

• 환경영향평가
• /
• 제10권2호
• /
• pp.123-133
• /
• 2001

Gaussian dispersion model is the most widely used tool for the ground level air pollution simulation. Though in spite of the convenience there are important problems on the Pasquill- Gifford' stability classification scheme which was used to define the turbulent state of the atmosphere or to describe the dispersion capabilities of the atmosphere which was each covers a broad range of stability conditions, and that they were very site specific, and the vertical dispersion calculation formula on the case of the unstable atmospheric condition. This paper was carried out to revise the Gaussian dispension model for the purposed of increase the modeling performance and propose the revised model, which was composed of the turbulent characteristics in the unstable atmospheric conditions. The proposed models in this study were composed of the profile method, Monin-Obukhove length, the probability density function model and the lateral dispersion function which was composed of the turbulent parameters, $u_*$(friction velocity), $w_*$(convective velocity scale), $T_L$(lagrangian time scale) for the model specific. There were very good performance results compare with the tracer experiment result on the case of the short distance (<1415m) from the source, but increase the simulation error(%) to stand off the source in the all models. In conclusion, the revised Gaussian dispersion model using the turbulent characteristics may be a good contribution for the development of the air pollution simulation model.

• 물과 미래
• /
• 제28권4호
• /
• pp.195-204
• /
• 1995

본 연구에서는 자연하천에서 수집하기 용이한 수리량 자료로부터 종확산계수를 추정하는 공식을 개발하였다. 차원해석을 수행하여 물리적 의미를 가진 변수를 선정한 후, 종확산계수를 추정하는 회귀식을 유도하기 위하여 비선형 다중회귀방법의 하나인 One-Step Huber 방법을 적용하였다. I 단계 연구에서 분석한 바 있는 미국 전역의 26개 하천 59지점의 수리 및 농도자료를 사용하여 새로운 종확산계수 추정식을 개발하였다. 59지점의 자료중 35지점은 종확산계수를 추정하는 회귀식을 유도하는 데 사용하고, 나머지 24지점을 사용하여 유도한 회귀식을 검증하였다. 기존의 공식과 비교한 결과, 본 연구에서 개발한 추정식이 자연하천의 확산 특성을 보다 정확하게 설명할 수 있음이 밝혀졌다.

• 한국정보통신학회논문지
• /
• 제10권10호
• /
• pp.1854-1862
• /
• 2006

본 논문에서는 광 전송로로 비영 분산천이 광섬유 (NZ-DSF ; Non Zero - Dispersion Shifted Fiber)를 이용한 $8{\times}40Gbps$ WDM 시스템에서 모든 채널을 효과적으로 보상할 수 있는 광 위상 공액기 (OPC ; Optical Phase Conjugator)의 최적 위치와 광섬유의 최적 분산 계수 값을 도출하는 수치적 방법을 제안하였다. 이 방법의 유용성을 확인하기 위하여 도출된 두 최적 파라미터를 갖는 시스템에서의 비트 에러율 (BER ; Bit Error Rate) 특성 을 현재 일반화된 MSSI(Mid-Span Spectral Inversion)에서 의 BER 특성과 비교하였다. 최적 파라미터들을 갖는 OPC를 WDM 시스템에 적용하게 되면 채널 간 파워 패널티를 4배 이상으로 감소시킬 수 있다는 것을 알 수 있었다. 따라서 본 논문에서 제안한 방법은 WDM시스템에 OPC를 적용하고자 할 때 전제가 되어야 하지만 실제 광 전송 링크에서 구현하기 어려운 OPC를 중심으로 한 광 신호 전력과 총 분산 값의 대칭 문제를 해결해야 하는 방법을 대체할 것으로 예상된다.

• 한국응용과학기술학회지
• /
• 제17권4호
• /
• pp.257-261
• /
• 2000

Monodisperse polymer particles have many industrial applications such as surface coatings for metal panels, chromatographic media, spacers for liquid crystal display panel, and fillers for cosmetics, etc.. Micron-size monodispersed poly(methyl methacrylate) particles were prepared by dispersion polymerization in methanol medium in the presence of poly(vinyl pyrrolidone) and 2,2'-azobis(isobutyronitrile) as steric stabilizer and initiator, respectively. Effects of polymerization parameters, such as monomer and initiator concentration, stabilizer type and concentration, solvent composition on average particle size and size distribution were studied.

• 대한교통학회지
• /
• 제6권1호
• /
• pp.55-64
• /
• 1988

Prior to using any computer model, the program-embedded palameters showing significant differences from real world should be calibrated. This is especially true when the model is expected to be used fro various roadway and traffic condition. The calibration of TRANSYT model was conducted for the parameters of start-up delay, and lag, stop penalty(K), platoon dispersion factor, and saturation flow rate. The values of the parameters were obtained by theoretical methods from actual field measurements for discharging and arrival pattern. The sites elected for the study was an intersection of Dongil-Ro and Hwarang-Ro, and a 334 meter downstrean section from the intersection stop line on westbound Hwarang-Ro. The study results showed that the start-up delay was 2.6 sec, end lag was 1.0 sec, saturation flow rate was 2287 pcphgpl, platoon dispersion factor was 0.2-03, and stop penalty(K) was 32. However, since these parameters re apt to depend on traffic and roadway condition, it is doubtful whether the obtained values will be applicable to the area-wide situation other than this particular site.

• Journal of the Korean Data and Information Science Society
• /
• 제24권4호
• /
• pp.895-900
• /
• 2013

In this research, we propose a simple bivariate zero inflated negative binomial regression model with different dispersion for bivariate count data with excess zeros. An application to the demand for health services shows that the proposed model is better than existing models in terms of log-likelihood and AIC.

• 한국시뮬레이션학회논문지
• /
• 제28권3호
• /
• pp.83-89
• /
• 2019

본 연구는 회전 비행체(Magnus rotor)를 탑재한 분산탄두의 분산 균일도에 미치는 요인 분석과 성능지표를 도출하기 위해 모탄의 속도 V와 회전속도 ${\omega}$, 비행경로각(flight path angle) ${\gamma}$ 그리고 고도 h의 변화에 따른 해석 결과를 기술했으며, 이때 모탄의 회전속도와 속도의 비를 새로운 변수로 정의했다. 자탄의 분산 해석에는 풍동실험을 통해 획득한 공력계수를 사용한 6 자유도 운동방정식을 이용했으며, 분산도 분석을 위해 회귀분석과 결정계수를 구해 분산도를 평가했다. 해석결과 최적의 회전속도와 낙하속도의 비, 비행경로각(flight path angle)을 구할 수 있었으며, 방출고도는 분산도에 회전속도와 낙하속도의 비, 비행경로각(flight path angle)의 영향에 비해 영향은 크지 않고, 자탄의 분산반경에 영향이 큰 것을 확인했다.