• 대한전자공학회논문지
• /
• 제26권7호
• /
• pp.98-105
• /
• 1989

본 논문에서는 생체 조직을 정량화하기 위한 음속의 측정법을 제안하였다. 기존의 음속 측정법에서는 주파수 분산의 영향이 무시되고 있으나, 주파수 분산은 전파 지연에 영향을 미친다. 따라서 진폭 스펙트럼으로부터 최소 위상 스펙트럼을 유도하여 주파수 분산을 정량화하였으며, 주파수 분산을 제거하기 위한 신호 분해법을 제안하였다. 또한 컴퓨터 시뮬레이션을 통하여 제안된 이론의 유효성분을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.723-728
• /
• 2001

Wind flow perturbations, recirculations and turbulence generated by buildings often dominate air pollutant distributions around buildings. This paper describes dispersion of contaminants in the vicinity of a building by solving the concentration equation based on previously simulated wind flow field. Turbulence closure is achieved by using the standard k-e two-equation model. The paper shows application of the CIP method for solving a species concentration equation of contaminant gas around a rectangular building for two different sources under conditions of neutral atmospheric stratification. Results have been compared to the experimental data and the previous numerical results by hybrid scheme. The computational results of concentration profiles by the CIP method agree well with experimental data.

• 한국기계가공학회지
• /
• 제20권2호
• /
• pp.72-79
• /
• 2021

The present paper aims to set forth a two-dimensional theory for the dynamics of plates that is valid over a large range of excitation. To construct a dynamic plate theory within the long-wavelength approximation, two dimensional-reduction procedures must be used for analyzing the low- and high-frequency behaviors under the dynamic variational-asymptotic method. Moreover, a separate and logically independent step for the short-wavelength regime is introduced into the present approach to avoid violation of the positive definiteness of the derived energy functional and to facilitate qualitative description of the three-dimensional dispersion curve in the short-wavelength regime. Two examples are presented to demonstrate the capabilities and accuracy of all of the formulas derived herein by using various dispersion curves through comparison with the three-dimensional finite element method.

• 한국지반공학회논문집
• /
• 제25권4호
• /
• pp.5-17
• /
• 2009

HWAW 기법은 시간-주파수 해석을 통해 신호/잡음비가 최대가 되는 부분을 이용하여 실험 분산곡선을 획득하고 full wavefield를 고려하는 정모델링 기법을 통해 역산을 수행한다. 따라서 다른 표면파 기법에 비해 짧은 측선 설정이 가능하며 2차원 전단파 속도 분포를 도출하기에 유리하다. 수평층 가정이 성립되지 않는 지반에서의 HWAW 기법 적용성을 평가하기 위해서 수치해석 검증 연구를 수행하였다. HWAW 기법을 통해 각 거 리별로 획득한 실험 분산곡선들은 전반적으로 full wavefield를 고려한 이론 분산곡선과 유사한 형태를 보이는 것을 확인할 수 있었다. 경사면 반사파에 의한 분산곡선의 왜곡현상은 적절한 감지기 간격 조절을 통해 줄여줄 수 있음을 확인할 수 있었다. 도출된 실험 분산곡선은 가진 원으로부터 감지기까지의 영역보다는 감지기 사이 영역에 주되게 영향을 받는 것으로 나타났다. 이로써 HWAW 기법으로 합리적인 전단파 속도 분포의 도출이 가능한 것으로 판단되었으며 고찰한 결과를 바탕으로 실제 현장에서 지반 영상화를 시도하였다.

• 한국수자원학회논문집
• /
• 제32권6호
• /
• pp.607-616
• /
• 1999

비보존성 오염물질의 종확산에 관한 수치모형을 개발하였다. 계산기법으로는 종확산 방정식을 이송, 감쇠 및 확산 방정식으로 분리하고, 이들 방정식을 1/3 시간 간격에 대하여 번갈아 계산하는 단계분리 유한차분기법을 사용하였다. 이송방정식에 대해서는 Holly-Preissmann 기법을, 감쇠방정식에 대해서는 해석적 방법을, 확산방정식에 대해서는 Crank-Nicholson 기법을 각각 사용하였다. 오염물질이 불균일 흐름 내로 연속적으로 유입되는 경우 및 균일 흐름 내로 순간적으로 부하되는 경우에 대한 종확산 문제에 모형을 적용하여 계산결과를 정확해와 비교함으로써 모형을 검증하였다. 또한 감쇠방정식의 수치해법으로써 Euler 방법을 사용하는 기존의 모형에 계산결과를 비교하였다. 감쇠계수가 커질수록 본 모형이 기존의 모형에 비하여 더욱 정확한 계산결과를 나타내었다.

• 한국광학회지
• /
• 제15권2호
• /
• pp.100-103
• /
• 2004

본 논문에서는 첩 광섬유 격자를 이용한 가변 분산 보상기를 소개한다. 개발된 가변 분산 보상기는 금속판의 벤딩에 의해 유도되는 인장력과 수축력에 대한 분석을 기반으로 첩광섬유 격자의 분산 값을 제어할 수 있도록 설계되었으며, 제작된 분산 보상기는 단순히 금속 원판의 회전만으로 광섬유 격자에 선형적인 인장력과 수축력을 유도하곤 중심파장의 이동이 없이 분산 값을 변화시킬 수 있었다. 분산 값은 회전각의 변화에 따라 228.04 ㎰/nm∼1430.7 ㎰/nm의 범위에서 분산 값을 제어할 수 있었다. 그리고 중심 파장의 이동은 0.03 nm미만이었다.

• 디지털산업정보학회논문지
• /
• 제11권1호
• /
• pp.79-88
• /
• 2015

In this paper, it is investigated that the limitation due to the asymmetry of optical power and chromatic dispersion with respect to optical phase conjugator (OPC) for compensating optical signal distortion in WDM system is overcomed by using OPC position offset and optimal dispersion coefficients of fiber sections, which depend on OPC position offset. It is confirmed that overall WDM channels are efficiently compensated by applying the optimal parameter values obtained from the proposed method into 24 channels ${\times}40$ Gbps WDM system with non zero - dispersion shifted fiber (NZ-DSF) of 1, 000 km, such as power penalties of inter-channel are reduce to almost 3.5 dB from the infinite value. It is also confirmed that the flexible design of WDM system with OPC is possible by using the optimal parameters, in which OPC is placed at ${\pm}15km$ from 500 km for efficiently compensating overall channels. Thus, the methods proposed in this research will be expected to alternate with the method of making a symmetrical distribution of power and local dispersion in real optical link which generates a serious problem if it was not made but it is the condition in the case of applying the OPC into multi-channels WDM system.

• 한국분말재료학회지
• /
• 제17권5호
• /
• pp.390-398
• /
• 2010

Aqueous gold nanoparticle dispersion was synthesized by chemical reduction method using diethanolamine as reducing agent and polyethyleneimine as dispersion stabilizer. The synthesis conditions for the stable dispersion of the gold nanoparticle suspension were determined by changing the amount of the reducing agent and dispersant during the wet chemical synthesis procedures. The face centered cubic lattice structure of the gold nanoparticles was confirmed by using X-ray diffraction and the morphologies of the nanoparticles were observed by transmission electron microscope. The synthesized gold nanoparticle dispersion was concentrated by evaporating the dispersion medium at room temperature followed by the addition of ethyleneglycol as humectant for the increase of the elastic properties to obtain gold nanoparticle inks for direct ink writing process. The line patterns were obtained with the gold nanoparticle inks during the writing procedures and the morphologies of the fine patterns were observed by scanning electron microscope.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.775-791
• /
• 2017

Surface wave techniques are widely used as non-invasive method for geotechnical site characterization. Field surface wave data are collected and analyzed using different processing techniques to generate the dispersion curves, which are further used to extract the shear wave velocity profile by inverse problem solution. Characteristics of a dispersion curve depend on the subsurface layering information of a vertically heterogeneous medium. Sometimes soft layer can be found between two stiff layers in the vertically heterogeneous media, and it can affect the wave propagation dramatically. Now most of the surface wave techniques use the fundamental mode Rayleigh wave propagation during the inversion, but this may not be the actual scenario when a soft layer is present in a vertically layered medium. This paper presents a detailed and comprehensive study using finite element method to examine the effect of soft layers which sometimes get trapped between two high velocity layers. Determination of the presence of a soft layer is quite important for proper mechanical characterization of a soil deposit. Present analysis shows that the thickness and position of the trapped soft layer highly influence the dispersion of Rayleigh waves while the higher modes also contribute in the resulting wave propagation.

• 한국전기전자재료학회논문지
• /
• 제36권5호
• /
• pp.494-499
• /
• 2023

In this paper, in order to apply the CF (color filter) type of the micro light emitting device (Micro LED) display method, a study on the manufacturing process of red and green phosphor inks for the inkjet process was conducted. The blue light-emitting KSF and LuAG phosphors were respectively used to control the phosphor particle size to about 1㎛, and a phosphor ink was prepared by synthesizing with a low-viscosity solution (IPA/Eg). A chemical dispersion method was applied to selectively control the dispersion characteristics in the manufacture of phosphor inks, and in particular, phosphor inks with a dispersant applied a dispersant secured stable dispersion characteristic compared to phosphor inks without a dispersion process. Therefore, it seems possible to manufacture CF for Micro LED through an inkjet process capable of controlling the dispersion characteristics of phosphor ink.