• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.19-26
• /
• 2003

The dispersion of recycled particulates in the complex coastal terrain containing Kangnung city, Korea was investigated using a three-dimensional non-hydrostatic numerical model and lagrangian particle model (or random walk model). The results show that particulates at the surface of the city that float to the top of thermal internal boundary layer (TIBL) are then transported along the eastern slope of the mountains with the passage of sea breeze and nearly reach the top of the mountains. Those particulates then disperse eastward at this upper level over the coastal sea and finally spread out over the open sea. Total suspended particulate (TSP) concentration near the surface of Kangnung city is very low. At night, synoptic scale westerly winds intensify due to the combined effect of the synoptic scale wind and land breeze descending the eastern slope of the mountains toward the coast and further seaward. This increase in speed causes development of internal gravity waves and a hydraulic jump up to a height of about 1km above the surface over the city. Particulate matter near the top of the mountains also descends the eastern slope of the mountains during the day, reaching the central city area and merges near the surface inside the nocturnal surface inversion layer (NSIL) with a maximum ground level concentration of TSP occurring at 0300 LST. Some particulates were dispersed following the propagation area of internal gravity waves and others in the NSIL are transported eastward to the coastal sea surface, aided by the land breeze. The following morning, particulates dispersed over the coastal sea from the previous night, tend to return to the coastal city of Kangnung with the sea breeze, developing a recycling process and combine with emitted surface particulates during the morning. These processes result in much higher TSP concentration. In the late morning, those particulates float to the top of the TIBL by the intrusion of the sea breeze and the ground level TSP concentration in the city subsequently decreases.

• Earthquakes and Structures
• /
• 제13권3호
• /
• pp.255-265
• /
• 2017

In this paper, an efficient shear deformation theory is developed for wave propagation analysis in a functionally graded beam. More particularly, porosities that may occur in Functionally Graded Materials (FGMs) during their manufacture are considered. The proposed shear deformation theory is efficient method because it permits us to show the effect of both bending and shear components and this is carried out by dividing the transverse displacement into the bending and shear parts. Material properties are assumed graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents; but the rule of mixture is modified to describe and approximate material properties of the functionally graded beams with porosity phases. The governing equations of the wave propagation in the functionally graded beam are derived by employing the Hamilton's principle. The analytical dispersion relation of the functionally graded beam is obtained by solving an eigenvalue problem. The effects of the volume fraction distributions, the depth of beam, the number of wave and the porosity on wave propagation in functionally graded beam are discussed in details. It can be concluded that the present theory is not only accurate but also simple in predicting the wave propagation characteristics in the functionally graded beam.

• Earthquakes and Structures
• /
• 제15권4호
• /
• pp.369-382
• /
• 2018

A free vibration analysis and wave propagation of functionally graded porous beams has been presented in this work using a high order hyperbolic shear deformation theory. Unlike other conventional shear deformation theories, a new displacement field that introduces indeterminate integral variables has been used to minimize the number of unknowns. The constituent materials of the beam are assumed gradually variable along the direction of height according to a simple power law distribution in terms of the volume fractions of the constituents. The variation of the pores in the direction of the thickness influences the mechanical properties. It is therefore necessary to predict the effect of porosity on vibratory behavior and wave velocity of FG beams in this study. A new function of the porosity factor has been developed. Hamilton's principle is used for the development of wave propagation equations in the functionally graded beam. The analytical dispersion relationship of the FG beam is obtained by solving an eigenvalue problem. Illustrative numerical examples are given to show the effects of volume fraction distributions, beam height, wave number, and porosity on free vibration and wave propagation in a functionally graded beam.

• 한국수산과학회지
• /
• 제25권6호
• /
• pp.443-456
• /
• 1992

황해에서와 같은 선형의 양향성 대륙붕 해저 지형에서 저주파의 분산관계가 단주기$\cdot$단파까지 포함하는 장주기$\cdot$장파 경우에 대해 유도되었다. 선형의 양향성 대륙붕에서 장주기$\cdot$장파일 경우 Bessel 방정식이 유도되는데 비해 일반적인 경우에는 Hummer 방정식이 유도된다. Hummer 방정식의 해로 유도되는 confluent Hypergeometric 함수는 극한 경우에 여러 형태로 바뀐다. 단일한 대륙붕에서는 해안선과 수직한 방향의 대륵붕 규모가 Rossby deformation radius에 비해 많이 작을 때는 수평흐름의 수렴$\cdot$발산효과가 무시되지만 양향성 대륙붕에서는 수평흐름의 수린$\cdot$발산효과가 해안선과 수직한 방향의 대륙붕규모가 관계없이 파동역학에 결정적으로 중요하다. 수렴$\cdot$발산효과는 Kelvin 파를 포함시키며 대륙붕파의 파속을 감소시킨다. 끝으로 양향성 대륙붕의 비마찰 eigenfunction들의 직교가 증명되었다.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1327-1336
• /
• 2001

The structural modes driven by the low wave-number components of smooth elastic wall pressure provide a relatively weak coupling between the flow and the wall motion. If the elastic thin plate has any resonant mode whose wave-number of resonance coincides with $\omega$/U$\sub$c/, the power will be transmitted to those modes of vibration by the flows. We examine the problem in which the elastic thin plate is subject to pressure fluctuations under turbulent boundary layer. Measurements are presented of the frequency spectra of the near- and far-field pressures and radiated sound contributed by the various wave modes of the thin elastic plate. Dispersion equation for wave motions of elastic plate is used to investigate the effect of bending waves of relatively low wave number on radiated sound. The low wave-number motion of elastic plate is observed to have much less influence on the low-frequency energy of wall pressure fluctuations than that of the rediated sound. High amplitude events of the wall pressure are observed to weakly couple with high-frequency energy of radiated sound for case of low tension applied to the plate. The sound source localization is applied to the measurement of radiated sound by using acoustic mirror system.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.301-306
• /
• 2014

We proposed a new PCB-type 'common-mode current($I_c$) and differential-mode current($I_d$) detector' working for fast detection of $I_c$ and $I_d$ from the differential-mode signaling, with miniaturization effect and possibility of cheaper fabrication. In order to realize this device, we suggest a branch-line-coupler balun having a composite right- and left-handed(CRLH) one-layer microstrip phase-shifting line as compact as roughly ${\lambda}_g/14$. The presented balun obviously is different from the conventional bent-&-folded delay lines or slits on the ground for coupling the lines on the top and bottom dielectrics. As we connect the suggested balun output ports of the differential-mode signal lines via the through-port named U and coupled-port named L, $I_c$ and $I_d$ will appear at port ${\Delta}$ and port ${\Sigma}$ of the present device, in order. The validity of the design scheme is verified by the circuit-and numerical electromagnetic analyses, and the dispersion curve proving the metamaterial characteristics of the geometry. Besides, the examples of the $I_c$ and $I_d$ indicator are observed as the even and odd modes in differential-mode signal feeding. Also, the proposed device is shown to be very compact, compared with the conventional structure.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.228-233
• /
• 2010

Methyl hydrogen polysiloxne으로 처리한 ZnO, fumed $SiO_2$와 다양한 망간 전구체를 이용하여 서브마이크로미터 크기를 갖는 망간이 도핑된 $Zn_2SiO_4$ 형광체 입자를 고상법으로 제조하였다. 결정화와 광발광 특성은 XRD, SEM, PL스펙트라를 이용하여 분석하였다. 고상법으로 제조한 망간 도핑된 $Zn_2SiO_4$는 methyl hydrogen polysiloxne 처리한 ZnO의 분산과 응집 때문에 $1000^{\circ}C$에서 성공적으로 얻어졌고, 진공자외선 여기하에서 제조된 입자의 최대 PL강도는 0.02mol Mn, $1000^{\circ}C$에서 확인되었다.

• 한국해안·해양공학회논문집
• /
• 제23권6호
• /
• pp.442-450
• /
• 2011

장기간 시행된 새만금 건설단계별 환경변화 분석을 위해 3차원 무작위 행보에 의한 입자추적 기법을 이용한 해석이 시도되었다. 방조제 공사로 만경 동진강 및 금강 하구역의 운동 양상이 크게 변화되었다. 변산반도 외해 부근 운동 감소와 호 내 북측구간의 흐름 정체가 특이하다. 조류 이동거리를 건설단계별로 평가한 결과도 유사한 결과를 보인다. 연직혼합형태의 변화 분석을 위해 수온, 염분을 고려한 밀도성층을 재현한 결과 방조제 착공 전 잘 혼합된 연직구조 형태는 공사 중 개방구간 존재 시 부분적으로 혼합된 구조로 변화되고, 완공 후에는 만경 동진강 하구 입구부에 염분쐐기 구역과 호소 측에는 강한 밀도성층이 발생한다. 해석결과 수평방향의 확산과 연직 방향의 혼합능력 감소로 새만금 내외측 수질환경에 부정적 영향으로 작용할 수 있음이 추론된다.

• Progress in Superconductivity
• /
• 제1권1호
• /
• pp.61-67
• /
• 1999

We evaluated the effect of alloying element additions to Ag sheath on mechanical, electrical and thermal properties of Bi-2223. Additions of Au, Pd and Mg to Ag sheath increased hardness and strength, while reduced elongation and electrical and thermal conductivity. In addition, microstructural investigation showed that the grain size of Ag significantly decreased with increasing content of alloying elements. The improvements in strength and hardness are believed to be due to the presence of alloying elements that lead to strengthen materials by combined effects of solid-solution, dispersion hardening and grain size hardening. Thermal conductivity of Ag and Ag alloys was evaluated in the temperature range from 77 K to 300 K, and com-pared to calculated value obtained by Wiedermann-Franz law. It was observed that the thermal conductivity decreased with increasing the content of alloying elements. Specifically, the thermal conductivity of $Ag_{0.92}Pd_{0.06}Mg_{0.02}$ alloy was measured to be $48.2W/(m{\cdot}K)$ at 77 K, which is about 6 times lower than that of $Ag(302.6W/(m{\cdot}K))$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.75-76
• /
• 2006

LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of kernel parts of LCD unit and it consists of several optical sheets(such as prism, diffuser and protector sheets), LCP (Light Guide Plate), light source (CCFL or LED) and mold frame. The LGP of LCD-BLU is usually manufactured by forming numerous dots with $50{\sim}200{\mu}m$ in diameter on it by erosion method. But the surface of the erosion dots of LGP is very rough due to the characteristics of the erosion process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current dot patterned LGP, optical pattern design with $50{\mu}m$ micro-lens was applied in the present study. Especially, the negative and positive micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The attention was paid to the effects of different pattern conditions to the brightness distribution of BLU with micro-lens patterned LGP. Finally, negative micro-lens patterned LGP showed superior results to the one made by positive in average luminance.