• 한국광학회지
• /
• 제14권1호
• /
• pp.72-79
• /
• 2003

본 논문에서는 고차 편광모드분산(PMD: polarization-mode dispersion)을 효과적으로 보상하기 위한 방법으로, DOP (degree of polarization)를 1차 PMD 보상을 위한 피드백 신호와 고차 PMD 보상을 위한 feed forward 신호로 사용하는 알고리즘을 제안하였다. 1차 보상이 끝난 후의 DOP값이 남아있는 고차 PMD의 정도를 나타내는 척도로써 인식하여 고차 PMD를 보상하는 시스템이 되겠다. 이러한 시스템은 고차 보상기의 자유도를 1차 보상기의 자유도로 제한하기 때문에 안정적이고 비교적 간단하게 구성할 수 있다는 장점이 있다. 제안된 알고리즘의 성능을 분석하기 위하여 10Gbps NRZ시스템의 전송 모의 실험을 수행하였으며, 그 결과 시스템 다운 시간인 outage probability가 약 세 배 가량 감소되는 것을 확인하였다.

• Macromolecular Research
• /
• 제17권7호
• /
• pp.476-482
• /
• 2009

The crystallization behavior of poly(vinyl alcohol) (PVA) in the presence and absence of polypyrrole nanoparticles (PPy NPs) was investigated in terms of the heterogeneous nucleation effect of PPy NPs using FTIR, X-ray diffraction, differential scanning calorimeter and polarized optical microscope analysis. PPy NPs were prepared by dispersion polymerization method stabilized by PVA in aqueous solution. A polymer nanocomposite with uniform dispersity could be readily obtained due to the enhanced compatibility between the filler and matrix. Compared with the PPy NP-absent PVA, the PPy NP/PVA nanocomposite exhibited an enhanced degree of crystallinity. The degree of crystallinity increased up to 17% at the PPy NP concentration of 1 wt%, compared to the pristine PVA. The PPy NP acted as an effective nucleating agent during the crystallization process, thereby enhancing the degree and rate of crystallization. The kinetics study of the crystallization also revealed the decreased value of the Avrami coefficient in the case of the PPy NP/PVA nanocomposite.

• 품질경영학회지
• /
• 제42권1호
• /
• pp.63-70
• /
• 2014

Purpose: This article introduces a case study of using Taguchi Method to improve lecture satisfaction. Developed by Taguchi Genichi, this method has its strength in finding the control factor that is robust against noise factor. Finding the condition for such control factor has an effect of reducing the dispersion of the Lecture satisfaction. Methods: There are various factors in university classrooms. The factors which influenced the Lecture Satisfaction are analyzed by control factors and noise factors, control factors which is controllable are lecture completeness and thoroughly test the degree of supervision and noise factors which is not controllable is degree of physical and psychological Lecturer tired, then the experiment is conducted as guided by Taguchi's experimental design, one semester are experimented by eight professor with 2 classes, after discussion of the results the optimal lecture condition is suggested. Results: To improve Lecture Satisfaction under noise factor of physical and psychological Lecturer tired, optimal condition are that lecture completeness have scenario note during lecture and thoroughly test the degree of supervision have two proctors during test. Conclusion: In this paper, we have succession case by applying Taguchi methods in Lecture Satisfaction. We can apply to improve service by applying the Taguchi methods. In the future we hope to have many succession cases.

• Transactions on Electrical and Electronic Materials
• /
• 제15권4호
• /
• pp.175-181
• /
• 2014

In this paper, the simulation and modeling of a polyethylene/clay nanocomposite were undertaken to predict the nanocomposite's dielectric behavior and to help design a nanocomposite material with optimum electrical properties for electrotechnical or electronic applications. A 3-D simulation model using the finite elements method was employed in order to study the effective permittivity and electric field distribution of two-phase nanocomposite materials for ordered and random distributions of inclusions in a low-loss host matrix such as polyethylene. The influence of the dispersion of reinforcing particles, and of the permittivity and radius of the inclusions, was analysed. The simulation results were compared with alternative, known theoretical solutions obtained from classical models, and were found to be in good agreement. The numerical results also indicate that for fixed volume fractions of nanoparticles the effective permittivity of the mixture, for ordered and random distributions, does not vary with the degree of dispersion. The variation of the effective permittivity with the particle radius is shown, using numerical data, to agree with the analytical modules.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.446-451
• /
• 2002

지르코니아/알루미나 복합분말의 분무건조로 제조된 과립들의 형상과 성형시 과립 경계면 파괴에 분말의 분산 정도, 결합제의 종류, 그리고 고형분말 함량이 미치는 영향을 관찰하였다. 구형의 과립은 복합분말 슬러리가 완전 분산이 되지 않고 약간의 floc을 형성하고 결합제로서 Polyvinyl Pyrrolidone(PVP)을 사용했을 때 얻어졌다. PVP를 결합제로 사용하고 분말함량이 32.5 vol%인 슬러리로 분무건조한 분말은 성형시 과립경계면이 파괴되어 소결밀도는 99.7%이었고 굴곡강도는 850Mpa이었다.

• KSBB Journal
• /
• 제31권4호
• /
• pp.291-299
• /
• 2016

In this study, Indomethacin, the poorly water soluble drug, was selected and prepared dispersing oral disintegrating films according to the molecular weight of polyethylene glycol (PEG) which are sort of dispersing agents. Also the molecular weight and content of PEG were evaluated effect on the degree of dispersion, physical property and dissolution when making oral dispersing film containing indomethacin to find appropriate condition and suggested guidelines of making oral dispersing film. The appropriate dispersing ratio of the amount of surfactants and dispersing agent were 1% and 4%, also the stability dropped in the PEG molecular weight of 4000 or more. Drying time of oral dispersing film was $90^{\circ}C$ for 10 minutes to 12 minutes that dispersing film's property about flexibility, detachability were very good. The oral dispersion film's content used PEG 400 was $98.6{\pm}0.5%$ and the most uniform. As the molecular weight of PEG increased, dissolution time also increased. On the basis of evaluation parameter, PEG with 400~600 of molecular weight was selected as good dispersing agent in oral dispersing film. Therefore, it can be suggested guideline of preparation application study in oral dispersing film.

• Carbon letters
• /
• 제11권2호
• /
• pp.107-111
• /
• 2010

We prepared the amine epoxy adducts (AEA)/thin multiwalled carbon nanotubes (TWCNTs) composite particles using nonsolvent based methods including dry mechano-chemical bonding(MCB) process and supercritical fluid (SCF) process. The resulting TWCNTs/AEA composite particles have been used as curing agents for urethane modified bispheol A type epoxy resin. The thermal, thermomechanical properties of the epoxy resins cured with TWCNTs/AEA composite particles were measured by DMA and the dispersion of CNT was characterized by SEM. Because of high degree of CNT dispersion, thermal and mechanical properties of the epoxy resin cured with TWCNTs/AEA composite particles prepared by SCF process are better than those cured with mechano-chemically prepared TWCNTs/AEA composite particles.

• 한국기계가공학회지
• /
• 제10권5호
• /
• pp.131-136
• /
• 2011

Many researchers are recently studying about Electroactive polymer(EAP). But it has a physical limitation, because of property of material. Carbon nanotube(CNT) is known as the promising material which has excellent electro-mechanical characteristics and is mostly defect-free. It is expected that a successful synthesis of CNT and Nafion known as a primary material for IPMC would make a great improvement on its electro-mechanic feature. This study focuses on the method of synthesis of CNT with Nafion which improves electro-mechanical characteristic. To come up with mechanical dispersion with Nafion and Isopropyl Alcohol(IPA), we dispersed Single-walled carbon nanotubes(SWCNTs). For a uniformly layer of CNT, we used a spray gun on a hot plate by a simplified method. We fabricated a disperse SWCNT/Nafion composite uniformly. Through the use of the E-beam evaporator to form an uniform electrode layer, we consummated the IPMC actuator. This result shows improving 1.5 times mechanical properties about driving force in IPMC.

• Asia pacific journal of information systems
• /
• 제16권1호
• /
• pp.85-101
• /
• 2006

Actual type of aggregation performed by an ordered weighted averaging (OWA) operator heavily depends upon the weighting vector. A number of approaches have been suggested for obtaining the associated weights. In this paper, we present analytic forms of OWA operator weighting functions, each of which has such properties as rank-based weights and constant value of orness, irrespective of number of objectives aggregated. Specifically, we propose four analytic forms of OWA weighting functions that can be positioned at 0.25, 0.334, 0.667, and 0.75 on the orness scale. The merits for using these weights over other weighting schemes can be mentioned in a couple of ways. Firstiy, we can efficiently utilize the analytic forms of weighting functions without solving complicated mathematical programs once the degree of orness is specified a priori by decision maker. Secondly, combined with well-known OWA operator weights such as max, min, and average, any weighting vectors, having a desired value of orness and being independent of the number of objectives, can be generated. This can be accomplished by convex combinations of predetermined weighting functions having constant values of orness. Finally, in terms of a measure of dispersion, newly generated weighting vectors show just a few discrepancies with weights generated by maximum entropy OWA.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.308-311
• /
• 2003

The mesoporous TiO2 film for the dye-sensitized solar cell was prepared by the spin coating using nano particle $TiO_2$ slurry. In order to obtain the good dispersion of nano size $TiO_2$ particles in slurry, the pH of solvent, the sort and quantity of solvent additive and the quantity of surfactant were adjusted. The experimental range of pH was $2\;{\sim}\;4$. The basic solvent for slurry was dilute $HNO_3$ and the solvent additives were ethylene glycol, propylene glycol and butylene glycol. The degree of particle dispersion was indirectly estimated by the viscosity of slurry and the microstructure after sintering. As results, the lower the pH of solvent was the lower the viscosity of the slurry became. The addition of ethylene glycol and propylene glycol to dilute $HNO_3$ brought about the lowering of viscosity and the enhancement of stability in slurry. The addition of surfactant lowered the viscosity of slurry. It was possible to obtain the homogeneous and uniformly dispersed mesoporous TiO2 film using the dilute HNO3 solvent of pH 2 with the addition of ethylene glycol, propylene glycol and neutral surfactant.